1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3 days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to 'standby' .
4. Put cooling gel on treatment area about 2mm.
5. 808nm diode laser: Wear protect glasses for patient and operator.
6. Shot the treatment area, let the crystal tip closely touch cooling gel, permitted to have 1/3 overlapping on treatment area.
7. Wipe off cooling gel after treatment and clear treatment area with cooling water. If patients feel warm or hot, you may put ice bag on treatment area until heat disappear.
German Laser Chip Hair Removal Machine Application:
755nm, most effective on white and more light color skin type
1064nm, made for treating darker and black color skin types
808nm, most effective for white to medium tan color skin types
All unwanted hair parts of the body, such as lip hair, whiskers, armpit hair, body hair, bikini hair.
More information you can click here
Wavelength 808nm, 755nm, 1064nm
Working frequency 1~10hz
Energy density 1-120J/cm²
Handle piece cooling TEC+Sapphire
TEC cooling 12V6A
Spot size 15*15mm/15*20mm/20*25mm/25*31mm ( optional )
Output power 600W,900W,1200W ( optional )
Laser chips Germany laser Jenoptik,150W/piece
Product Application
Suitable for plastic pipes, Electric cable, electronic components, electrical products, IT industry, auto parts, hardware tools products, precision instruments, gift accessories, medical equipment and other high-end products of precision, fine logo printing. Typical applications such as, plastic (PA66) insulation flying laser marking, plastics laser marking, packing box body online laser marking, medicine package & PET bottle laser marking, wooden material marking etc.
Description Of CYCJET LF30F Flying Laser Marking Machine
1; Laser oscillation in the FIBER optical wave, low dissipation, good stability and is not affected by external dust gas and mechanical looseness, the output of a laser beam is stable.
2; Processing speed is 2 to 3 times the traditional laser marking machine.
3; Wind cooling FIBER laser, no consumables, low maintenance, high photoelectric conversion rate, low consumption (600 w) or less, use cost.
4; Integrated design, small size (there are a whole cabinet and portable optional).
5; Environmental adaptation ability strong can be in vibration, shock, dust, humidity environment continuous work, easy to implement with optical FIBER coupling, which can realize remote work.
6; Bar code, QR code, graphics, text rules and irregular marking serial number, etc.
7; Software running on WINDOWS platform, Chinese/English interface, can be compatible with AUTOCAD, CORELDRAW, PHOTOSHOP software, such as PLT, PCW, DXF, BMP, etc, but also can be used directly SHX, ttf font.
Leapion fiber laser marking machine LF-20H use the world top brand parts,jcz ezcad control system , and imported high precision, high speed, large torque, performance is stable and durable, ensure the high speed operation of the whole machine., high power ,high precision.Top brand control system : automatic layout optimization.
Fiber Laser Marking Machine can mark logo, character, serial number, bar code, data matrix on both metals It does not have consumable. It's very cost effective. It boasts fast marking speed and high marking precision. It's widely used and well accepted in prevailing international market.
Pioneer cnc fiber laser cutting machine PF-3015S is specially designed laser cutter for carbon steel,stainless steel,aluminum,copper and other metal cutting demands.
PF-3015S laser cutter is suitable for 3000mmx1500mm plate steel cutting process. This machine is equipped with Raycus laser source,range from 1000w-4000w to suit different metal cutting thickness.Standard type will have Swiss Raytool laser head with auto focus function to higher working efficiency and cutting precision.Japan Yaskawa servo motor can ensure long time stable running condition,plate steel welded heavy duty machine bed can protect cnc laser cutting machine from deformation in longer lifespan.
This machine is widely used in steel fabric,kitchenware,fitness equipment,agricultural equipment manufactruing,lighting industry,metal craft cutting,automobile industry...etc.
2921 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
High Speed Fiber Laser Tube Cutting Machine CNC Tube Laser Cutter For Sale
1.PG-6020L tube laser fiber cutting machine is professional tube cutting fiber laser machine, suitable for all kinds of stainless tube, round tube, square tube and oval tube.
2.It can satisfy various tube cutting process such as tube cutting-off,tube hole cutting,or any shapes cutting on tube surface.
3.The machine adopt Raycus laser source,Swiss Raytools auto focus laser head,Japan Yaskawa servo motor to give you perfect tube laser cutting performance meanwhile ensure long time stable running,less failure rate,maintenance costâ?¦etc
4.It can be also equipped with automatic material loading system to higher efficience,it is optional according to your demands.
High Power CNC Laser Cutting Machine Laser Cutter For Metal Processing
The series of pioneer PF-3025D laser cutting machine offers power ranges between 1000W to 10000W. One of the most efficient machine technologies for rapid sheet metal cutting which can cut the thickness for 50mm or less.
1. Saving Material ---- CNC control, it can cut the material in different shapes, improve the utilization rate and reduce waste.
2.Easy Programme ----high accuracy, cut to shape without molding, smooth finish, eliminating the process for edge modification.
3. Save Investment for Molding ---- Laser cutting without molding, eliminating the cost for molding and repair, save time, resulting in less manufacturing cost, reduce the cost of goods sold, particularly suitable for processing parts in large-size.
4. Protecting Environment ---- working area for laser cutting is fully enclosed, low noise, is clean, safe, free of pollution, totally improve the working condition and environment.
This PFG-3015D double-platform laser cutting machine is a fully enclosed laser cutting machine combining with tube cutting function.Full enclosure design can not only reduce the damage of laser radiation to workers, but also effectively prevent metal debris splash from causing damage to operators.The maximum power of this metal laser cutting machine can reach 20000W. It can be used for cutting, punching and engraving various precision parts and machine panel.The metal crafts processed by the optical fiber laser cutting machine have little heat effect on the cutting seam and generally do not need secondary processing.
Application Materials
Fiber Laser Cutting Equipment is suitable for metal cutting like Stainless Steel Sheet, Mild Steel Plate, Carbon Steel Sheet, Alloy Steel Plate, Spring steel Sheet, Iron Plate, Galvanized Iron, Galvanized Sheet, Aluminum Plate, Copper Sheet, Brass Sheet, Bronze Plate, Gold Plate, Silver Plate, Titanium Plate, Metal Sheet, Metal Plate, Tubes and Pipes, etc
Application Industries
Machines are widely used in manufacture Billboard, Advertising, Signs, Signage, Metal Letters, LED Letters, Kitchen Ware, Advertising Letters, Sheet Metal Processing, Metals Components and Parts, Ironware, Chassis, Racks & Cabinets Processing, Metal crafts, metal art ware, elevator panel cutting, hardware, auto parts, Glasses Frame, Electronic Parts, Nameplates, etc.
Techwin C Band ASE Broadband Light Source CKSS-C-B
We try to supply Fiber Laser similar to keopsys fiber laser,NKT Photonics fiber laser,NP Photonics fiber laser,IPG Photonics fiber laser,BKtel Photonics fiber laser
Product Description:
Techwin C-band ASE light sources employ optimized Er-doped fiber laser and realize output laser which is featured by different spectral width, high output power and extremely high stability of the output power within the whole temperature range. Techwin C-band ASE light sources have extremely high spectral flatness. For the purpose of different applications, the Gaussian spectral output can be provided according to the requirement of the user.
Techwin Multi-mode diode laser sources are a highly integrated system sources. The benchtop sources uses high-definition LCD which displays the current and voltage synchronously and has continuously tunable output power; suitable for scientific research and manufacturing testing. In addition, Techwin can provide compact module package for system integration.
Features:
Single mode output fiberï¼?PM fiber optionalï¼?
Adjustable output power
High stability and high reliability
High flatness and low ripple
LCD display, easy operating
Applications:
Components testing
Optical fiber sensor system
Fiber optic gyroscope
Spectrum Analysis
Other lab applications
FAQï¼?
1.What's MOQ?
We accept 1 pc toally,but more quantity,more discount.
2.How about the delivery?
We promise deliver the good within 7 days.
3.What's the warranty?
One year,special order TWO or THREE years.
any question please contact us.
lipan at fsm-otdr dot com
Techwin CKLID series 1030nm Short Pulse Fiber Laser for LiDAR
We try to supply Fiber Laser similar to keopsys fiber laser,NKT Photonics fiber laser,NP Photonics fiber laser,IPG Photonics fiber laser,BKtel Photonics fiber laser
Product Description:
Techwin CKLID series 1030nm pulsed fiber laser is a laser source delivering high peak power and high pulse energy. Using MOPA configuration and all- fiber optimized design, the laser can offer the high peak power and the near diffraction-limited quality output beam.
Techwin CKLID series 1030nm pulsed fiber laser employs module package with compact and rugged design, integrated with external trigger and synchronization output monitor. It is easily deployed and maintenance-free, ensuring a long- life and cost-effective operation. The user also can adjust pulse width and repetition rate of the laser by connecting computer. It is quite suitable for system integration.
Features:
High peak power: up to 4kW
Average power: up to 1W
Repetition rate adjustable
Pulse energy: up to 10μJ
Excellent beam quality
Applications:
LiDAR
3D scanning
Range finding
Target detection
Telemetry
Punching marking making machine
iron aluminum plate punching making machine
Specification:
Dimensionï¼?200cmx190cmx175cm
Weightï¼?350KG
This machine is designed as customered with different dot or pictures.
Packingï¼?
Main machine is nude, the computer control box is packed with wooden frame.
Main machine is nude in the container, the computer control box is packed with wooden packaging.
This producing line is maintained free of charge for 18 months. When the machine is used in China, we will install and debug the machine for free; if it is used at abroad, we will send the professional technician to debug.
Botou Xinbo Machine Making Company mainly produce and sell All kinds of machines and cnc machining services. roll forming machines,C Z purlin machine, deck floor machinesï¼?stud &track light keel machine, T grid machine, downpipe machine,EPS and Rockwool sandwich panel machines for the building structure and all kinds of CNC machining services.
Techwin 1.0μm Single Mode CW Fiber Lasers for Test and Measure
www.techwin-china.com
we try to supply fiber laser similar to keopsys fiber laser,NKT Photonics fiber laser,NP Photonics fiber laser,IPG Photonics fiber laser,BKtel Photonics fiber laser
Product Overview:
Techwin 1.0μm single-mode CW fiber lasers of are a highly integrated continuous Yb-doped fiber laser system with high power output. These fiber lasers employ integrated design of all fiber structure and use double cladding fiber pumping technology, thus realizing high performance output laser. The output power can be up to 20W and near diffraction-limited beam quality is achieved at the same time. They can be widely used in the areas of scientific research, experimental teaching and device testing.
Techwin 1.0μm single-mode CW fiber lasers employ the control system based on microprocessor which has stable property, long lifetime and free maintenance. With a clear interface and easy control, the LCD on the front panel can give a real-time display of the operating state of the output power and temperature. The LCD can also offer warning messages. Besides, in order to be convenient for system integration, Techwin can offer modularized package according to the user`s requirements.
Features:
â?¢ High output powerï¼?up to 50W
â?¢ Excellent beam quality
â?¢ High Stability and reliable performance
â?¢ Single-mode outputï¼?PM optional
Applications:
â?¢ Test and measure
â?¢ Scientific research
â?¢ Spectroscopy analysis
â?¢ Other lab applications
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110
105Ã?105
175Ã?50
90
80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
The machine for cutting short material, small, large amount of development design. The saw cut surface is bright and clean without burr, without secondary processing. High efficiency, high precision, suitable for cutting various kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic, plexiglass (acrylic), carbon fiber materials, etc. Especially suitable for electronic parts, heat sink, audio panels, graphics CARDS, network CARDS, CPU, hard disk, MP3 shell aluminum shell, U disk shell...Precision sawing.
1. Strong structure, strong rigidity, small vibration, saw blade from the top down saw cutting, saw cutting precision is high.
2. NC controller and touch screen are used for easy operation and fault detection.
3. Automatic feeding, automatic clamping, automatic oil spraying and automatic sawing.
4. Servo motor is used to drive ball screw, with an accuracy up to 0.01mm. The machine will automatically stop without material induction during the processing.
5. The clamp is designed with pressing and side clamp, which can clamp irregular materials with firm clamping.
6. Special sawing action design feeding mode :1. Step feeding 2. Reciprocating feeding 3. Manual feeding.
7. A new design and upgrading of the waste discharge and discharge system creates a clean and tidy working environment.
Model ZG-360NC
Cutting Angle 90°
Cutting ability
mm
110
105Ã?105
175Ã?50
90
80Ã?80
Machine motor 5.5HP 4P
Saw blade 2850R.P.M
Feed servo motor 1KW
Blade size Tungsten steel blade with blade tip
Ï?305ã??405Ã?Ï?25.4mm
Operating air pressure 6-8kg/cm2
Machine dimension 2000Ã?1100Ã?2006
Machine weight 960kg
Be suitable for sawing various irregular non-ferrous metals, aluminums, aluminum alloys, coppers, copper alloys, PVC profiles, plastics, PVC, Bakelite plates, organic glasses (acrylic sheets) and carbon fibers and so on, especially suitable for precise sawing copper and aluminum electronic components, cooling fin, sound panel, video card, network card, CPU, hard pan, MP3 aluminum case, U disk aluminum case, aluminum windows, photo frames, picture frames, light boxes, screens, display devices, furniture aluminums, extruded aluminum and profiles.
1ã??Accurate cutting angle, high precision, smooth cutting section, burr-free and high efficiency.
2ã?? Stamp foot switch to auto press and saw materials, which is safe and easy.
3ã?? Down-to-up hidden sawing mode: high security, single or multi cutting available.
4ã?? Pressing system adopts precise linear slide to drive and is controlled by independent compressed air cylinder. High pressing stability (be able to adjust pressing pressure according to material type to prevent material from damaging caused by hard pressing).
5ã?? Be able to set pressing height and speed and cutting height and speed according to material size and thickness.
6ã?? Precise compel injection system promotes lubrication and cooling effect, reduce failure rate and prolong service life of saw blade.
7ã?? 0~45 angle cutting available. Angle adjustment is easy and accurate.
Suitable for cutting all kinds of nonferrous metal, aluminum, aluminum alloy, copper, copper alloy, plastic material, plastic, PVC, wood, organic glass (acrylic) and carbon fiber materials, particularly applicable to large-scale copper and aluminum electronic components, radiator, audio panels, aluminum doors and Windows, aluminum frame, light boxes, display equipment, furniture, awning room aluminum materials, aluminum formwork, aluminum extrusion and precision cutting of different profile.
1. accurate sawing Angle, high precision, smooth cutting surface without burr, high efficiency.
2. only foot switch, automatic mechanical pressure, automatic saw material is safe and easy
3. hidden saw blade from the bottom up sawing, sawing single or multiple materials at the same time
4. the pressing system is driven by precise linear sliding track and controlled by independent air pressure cylinder, with high stability of pressing material (the pressure can be adjusted independently according to the material type to prevent material damage caused by heavy pressure)
5. press height and speed and saw cutting height and speed can be set according to material size and thickness.
6. precision forced oil injection system, improve lubrication and cooling effect, reduce failure rate and prolong blade life
7. can do ± 0~45 degrees arbitrary Angle saws, Angle adjustment convenient and accurate.
High spindle rotation. Cut two 45° (one 45°at left and right respectively) simultaneously with one movement. Accurate cutting angle. Smooth cutting section and burr-free. No need for secondary processing. High efficiency: 3 times of productivity of common single-head machine. Be suitable for 45°saw cutting (sliding door and window frame, photo frame, picture frame, display case, air outlet, light boxes, screens, strips, aluminum binding, extruded aluminum â?¦â?¦ ).
1. Double-pole synchronous saw cutting: cut two 45° (one 45°at left and right respectively) simultaneously with one movement and save 2/3 of time compared to general cutting.
2. Stamp foot switch to auto press and saw materials, which is safe and easy.
3. Air-pushed hydraulic saw feeding and steady cutting speed. Auto-spray atomized cutting oil during cutting to cool and lubricate saw blade to keep it clean and sharp.
4. Clamp with cylinders at top and bottom, front and back, steady materials, never deform, accurate cutting angle and pressing pressure adjustment available to prevent hollow material from deforming.
5 . 2.5*2.5m feeding and discharging rack are specially installed on right and left of the machine. Set positioning plate on discharging rack for convenience of determining cutting dimensions (transfer table is steel platform).
Model ZG-350SA2
Sawing angle 45Ã?2
Max. sawing width 90mm
Max. sawing height 140mm
Spindle speed 3300R.P.M
Saw blade tungsten steel head; alloy saw blade
Dimension of work surface 870Ã?190Ã?800mm
Machine motor 2HPÃ?2
Air pressure 6kg/cm2
Machine dimension 1410Ã?900Ã?1300
Packing dimension 1500Ã?980Ã?1420mm,2500*150*100
NW/GW 390/460kg
5. hyperviscosity, hyperlipemia, hyperlipidemia, hypertension, cardiovascular and cerebrovascular diseases
nose ear probe
What is the Clinical test of the Home use red laser light therapy device?
After about 30 min irradiation treatment, blood red cells wil be activated, become single, active, health and normal.
After about 30 days treatment, headache, dizziness, chest tightness, numbness and other symptoms will disappear.
After about 3 months treatment, you can do blood detect, or CT detect, high blood pressure, high blood viscosity, high cholesterol will get back to a normal level.
What's the Characteristics of the Laser therapy device ?
1 . Physical therapy with low level laser therapy , no side effect, no trauma
2 . Small size, easy to carry, it could be use at anywhere
3. It`s adopt the non-invasive laser acupuncture, to ensure the treatment efficiency
4. The treatment efficiency is around 90%
5. Imported laser diode , to ensure the laser output quality and durable
6. It could also connect to the ear treatment probe, oral&throat treatment probe and pain relief probe(that`s all the extra parts)
7. The exterior shell is stainless steel, show the high class , and help the main device heat output.
8. The wrist part shape is coordinate with the wrist shape, the humanized design.
9. This technological has been proved,and got a CE certification.
2921 Laser Equipments Products Suppliers
Short on time? Let Laser Equipments Products sellers contact you.
