Place of Origin:
Fujian, China
Brand Name:
Uwater (OEM acceptable)
Model Number:
ULS002-1
Product name:
personal Water Filter Straw of camping
Material:
Disruptor
Function:
Remove Virus, Bacteria, Spore
Filtration Efficiency:
99.9999%
Use:
Water Purifiers
Heat-resistance:
0�°C to 60�°C
Application:
Life straw
Certificate:
LFGB, BPA free, EN71
Size:
OD 30 mm
Color:
customization
TCB808 One Piece Smart lavatory nightstool Intelligent commode closestool
[Function and Descriptions]
Posterior Wash:Cleanse posterior
Feminine Wash:Cleanse feminine area
Enema :Good for constipation patients to help pass motions
Dry:Dry the wet part after cleaning
Water pressure:Adjust water pressure
Nozzle Position:Adjust nozzle position
Oscillating:Cleanse with nozzle movement back and forth
Seat Temperature : Adjust seat temperature
Water Temperature:Adjust water temperature
Dry Temperature:Adjust dry temperature
Remote Control:All functions of bidet to be operated by remote
Operation Lamp:Indicate current operation
Auto Flushing:Automatically flush the ceramic by feces or urine
Remote control flush:Full flush and small flush available by remote control
Power Saving:Save power while non-use
Air bubble flow wash:Make one feel more comfortable
Anti Electric Leakage:Automatic power failure when leakage occurs.
Deodorant:Eliminates bad smell from the bathroom
Seat slow drop down:Damper make seat open or close low noise and stable
Luminous function:LED light make bowl warm and fragrant feeling
Prevent Over-heating:Temp sensor and controller prevent temp over-heating
Backup Button:Button is used when remote control wouldn't work
Self-checking:Self-check and warning when product failure occurs
Manual Flushing:Use Manual Flushing button to discharge when power off
Self-cleaning nozzle:Before wash function,self clean nozzle with water
Cleaning wand Button:Press the button,nozzle will extended,easy for cleaning
Anti-pollution process:Both In the ceramic parts,seat and nozzle parts
[Specifications ]
Model :TCB808
Rated Voltage : 220-230V 50 HZ
Power Consumption : 650 W
Power Cord Length : 1.5 m (5 feet)
Water Consumption:Full Flush:6.4 Liter
Flushing System:Siphon jet,Tornado flushing
Posterior Wash:Max 0.7 Liter/min
Feminine Wash:Max 0.7 Liter/min
Enema:Max 0.7 Liter/min
Water Temp : Adjustable34Celsius,37Celsius , 40Celsius
Water Tank : 2.0 Liter
Heater Capacity : 600 W
Seat Temperature : Adjustable34Celsius,37Celsius , 40Celsius
Heated Capacity : 45 W
Water Pressure:0.15 Mpa - 0.75 Mpa
Waterproof Rating:IPX 4
Inlet water Temp : 3 Celsius - 35 Celsius
Ambient Temp : 3 Celsius - 40 Celsius
Dimension:L:792m * W:420m *H:579m
Weight : 53 KGS(Bide 8 KG , Toilet 45 KG)
Safety Device:Thermal cutoff,Overheating prevention circuit,Temperature sensor
Product Standard : GB4706.53-2008
Material: Medical grade PP material
Size: 10uL 100uL 200uL 1000uL
Absorption treatment: Low Retention Treatment
Sterilization manner: Irradiation Sterilization
Fits most brands and models of pipettors: Eppendorf, Thermo, Brand, Gilson, Rainin (Made in China) and Dragon, etc.
Application: Fast and accurate pipetting processing widely used in molecular biology, clinical chemistry, biochemistry research.
Other features: Sterilize, DNase & RNase free, Non-pyrogen (Endotoxin free)
This equipment is formulated in accordance with JIS D 0203 standard to test the waterproof performance of the product, equipped with an automatic water inlet and water circulation device, effectively saving money. Corresponding test chambers are prepared according to different test requirements. The multi-function controller is easy to operate, one-key controls the test requirements parameters, and can be connected to the PC terminal remotely to facilitate the download and use of test data. It is mainly applied to the automobile industry.
4877 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
Larger series sand and dust test chambers allow for large and more quantity specimens, a capacity of 1500 liters and 2000 liters as standard. Great for laboratories and large industrial products.
Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seal. Dust ingress test methods included IEC60529, ISO20653, MIL-STD-810G, and many others.
The airflow circulates upward from the bottom, blowing the dust circulation, forcing dust around the specimens. All models are upgraded to programmable controller and Ethernet access that provides simple operation and control.
Over 29 different models let you choose size, configuration, and performance to suit many types of environmental test conditions. Temperature change rates from 1 to 15 C/min.Low temperature available: A: -20, B: -40, C: -70 , D: -86 .E:-200â ( liquid nitrogen refrigeration.
Included are ultra low-temperature test chambers, fast temperature change rate chambers (15/min), and liquid nitrogen refrigeration test chambers.
To perform cold resistance test, thermal cycling test, ultra low-temperature test, high-temperature test, storage condition, and calibration function.
Application: Ozone resistance test chambers test elastomers (rubber) in the condition of ozone exposure, to simulate and measure rubber aging by means of ozone within a few days.
Structure: Built with dynamic and static sample holders, cooling system, humidity system, air circulation, ozone generating unit, ozone exhaust device, and control system.
Standard: ASTM D1149, IEX6006811-403, ISO1431, ASTM D1171.
Operate: All models are upgraded to a programmable controller and Ethernet access that provides simple operation and control.
SO2 Noxious Gas Test Chambers reproduce damages by temperature, relative humidity, and noxious gas Corrosion to material, components, and constructions.
This noxious gas chamber can be used for single gas tests and mixed gas tests. Test methods are in accordance with IEC 60068-2-42, IEC60068-2-60, and other standards.
This chamber is for temperature & humidity tests, cold resistance tests, thermal cycle tests, ultra-low temperature tests, high-temperature tests, storage conditions, and calibration functions.
This UV test chamber is used in tests that incorporate UV light, temperature, condensing humidity, water sprays, and irradiance control. UV weathering resistance test chamber uses UVA-340, UVB-313 fluorescent UV lamps for a variety of test conditions. Accelerated weathering tests included color change, gloss loss, chalking, cracking, crazing, hazing, blistering, strength loss and oxidation, and many others.
UV series weathering chambers are upgraded to a programmable controller and Ethernet access that provides simple operation and control.
Xenon arc lamp test chamber reproduces weathering damage by sunlight, temperature, humidity, and water spray. Xenon weathering test chambers are utilized in textiles, dyes, leather, plastics, paints, coatings, automotive interior parts, electrotechnical products, color building materials. To perform weathering test, colorfastness tests, aging test, hardening test, softening test, crack. Accelerated weathering test methods included ISO4892, ASTM G155-1/155-4, ISO 105-B02/B04/B06, ISO11341, AATCC TM16, TM169, , JIS L0843, SAEJ1960/1885, JASOM346, and many others.
XL-S-750 xenon weathering chambers can place 42 pieces of specimens, are an upgrade to a programmable controller and Ethernet access.
IPX5 IPX6 Water Jetting Test Chamber is applied to test the water tightness of enclosures of automotive parts, outdoor lamps, and electronics parts.
The chambers are built with the water-tightness of sealed components such as headlamps, Power connectors. A waterproof power connector in the test room can easily supply electricity to the specimens.
IPX5 and IPX6 function on one test chamber, make testing convenient and cost-effective.
LIB Water spray test chambers can perform tests in accordance with IEC60529, and IPX1 IPX2 IPX3 IPX4 protection code. The chambers are built with the water-tightness of sealed components such as headlamps, Power connectors. A waterproof power connector in the test room can easily supply electricity to the specimens.
The water spray Chamber built with a water re-circulation system that reduced water use and a series of water pipes. The incorporated rotating turntable can promote an even spray of water over the surface of the products under testing. An automatic water supply ensures an adequate supply of water and automatic testing. All models are upgraded to a programmable controller and Ethernet access that provides simple operation and control. Various sizes and configurations to suit many types of test conditions.
IP5X IP6X Sand and Dust IP Test Chambers are capable of 800 liters,1000 liters, 1500 liters and 2000 liters. Considering that some specimens are smaller and less, so we designed and produced small dust chambers and larger dust ingress test chambers.
Sand and dust test chambers are made for the simulation of dust and sand conditions. These dust test chambers are used to test the exposure of automotive and electronic components under extreme environmental conditions in order to validate product seals. Dust ingress test methods included IEC60529, ISO20653, and many others.
The airflow circulates upward from the bottom, blowing the dust circulation,forcing dust around the specimens. All models are upgrade to programmable controller and Ethernet access that provides simple operation and control.
We designed and produced high-temperature drying ovens at temperatures up to +250 C, +500 C, +800 C, +1000 C, +1200 C with small, medium, and large volumes. Ovens are used for high-temperature drying, paint drying, drying glass and plastics, ink, and removing moisture, wood drying, and high-temperature tests. Applied to aerospace, automotive, electronics, metalworking. Drying ovens are available in various sizes and temperature ranges, including standard and custom ovens.
A Whole Set of water spray IP Test apparatus, IPX1 X2 X3 X4 X5 X6 X7 X8 full set water ingress IP test equipment -No Housing Type. One complete system to perform IP dust and rain test, one-stop solution for IP test.
The environmental test chamber is for PV modules (solar panels) thermal cycling, humidity freeze cycle, and damp heat RH testing, to test whether PV modules can withstand high temperature with humidity and low temperature, to test its fatigue and thermal failure after temperature repeated changes, to confirm its thermal stress PV modules generated under high humidity circumstance and capability of long-term resistance to moisture penetration. This test chamber is widely used in solar panel testing. Different models let you choose size, configuration, and performance to suit many types of solar panels for IEC, UL test methods.
Cyclic corrosion test chamber exposes sample to a series of different environments in repetitive cycles that incorporate temperature, humidity, salt spray, and dry. SC series corrosion chambers are upgrade to programmable controller and Ethernet access.
Cryogenic Chamber uses a mechanical compressor to refrigerate to -120 C, replacing the traditional liquid nitrogen refrigeration method. It is mainly used in high-precision fields such as aerospace, military, electronic component testing, and high-end processing industry quenching processes.
4877 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
