Application in molecular biology, immunology, chemistry lab
Compact design
Compatible for use with various capacity conical flasks and different sample containers.
Silent and stable operation
Digital set up of RPM and time with independent LED display
Maximum stirring speed upto 300RPM
Built in DC brushless motor
Microprocessor controlled
User-Friendly
Low consumption
Audible alarm at time cycle end for safety and ease of unsupervised operation
Digital LCD Display.
Last Measurement in Memory.
Heating & Stirring can proceed Simultaneously.
Bushless Motor for Low Noise.
Anti scratch and Corrosion Resistance.
Ceramic Plate Surface.
ABS Cabinet.
Magnetic stirrer is mainly suitable for liquid mixing, it can simultaneously do heating and stirring of low viscosity liquids or solid liquid mixtures. Its used as an experimental tool in various Universities, Environmental Protection, Sanitation, Epidemic Prevention,
Chemical Tap Water, Medical and Other Units.
Digital LCD display.
Control through Knob.
� Maximum Stirring Volume 2L.
� Stirring - MS100S.
� Heating & Stirring - MS280H
Brand
Labtical
Model Name/Number
MS280H
Type
Magnetic Stirrer
FunctionÃ?Â
Stirring & Heating only
Temp. Range & Accuracy
280�°C & Acc.+1�°C (<100�°C)+ 3�°C(<280�°C )
Stainless Steel Magnetic Stirrer with Hot Plate Magnetic Bead is a magnetic stirrer which can be used for heating, stirring and agitating in flasks and beakers.
Its large magnet bar offers a sufficient magnetic force for heating and stirring.
The hot plate on the top of the magnetic stirrer offers ideal conditions for heating up liquids or buffers.
It� has a high-quality stainless steel body and paddle, as well as a hot plate.
The Magnetic stirrer is also equipped with an adjustable stir bar, which allows you to control the speed of your chemical reactions.
This magnetic stirrer has a built-in temperature sensor and an adjustable thermostat that can be set to control the temperature of its 100W silicone heater.
The stainless steel body and lid of this magnetic stirrer offer durability and easy maintenance, while its powerful neodymium magnet ensures smooth mixing action.
� Speed - Upto 2500rpm variable
Temperature - Ambient to 300 degree
Plate Size - 250X250mm
Plate Material - Stainless Steel
Capacity - 2lt
Laboratory stirrer is a laboratory equipment used for mixing and stirring liquids and solutions. It is designed to provide a consistent and uniform mixing of substances in a laboratory setting. The stirrer is made up of a motor, a shaft, and a mixing blade. The motor provides the power to rotate the shaft, which in turn rotates the mixing blade. The mixing blade is designed to create a vortex in the liquid, which helps to mix the substance thoroughly.
The motor stirrer having maximum speed upto 4000 r.p.m. unit is clamped to a C.P. rod fitted� on a heavy cast iron base. The height and angle of the stirrer can be adjusted according to the requirement. Variable speed Motor with speed regulator is fitted with S.S. Stirrer rod to give smooth and noiseless operation. With 1/20 H.P. Universal Motor
4935 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
Digital LCD Display.
100 ~ 2500rpm speed.
Maximum Volume 20L.
Stirring has three modes - Clockwise,
Anticlock wise & Alternating.
Stainless Steel Head.
Digital type bushless motor.
Tissue homogenization is a process, often used in the biotech industry, used to prepare tissue samples for further study, research, or development. The process involves the lysing or breaking apart of cells in order to release their contents.
Stepless speed regulation
Capacity: 5ml-250ml
Random working head configuration: 10mm
1ml Minimum processing capacity (water)
Processing capacity (water): 250ML
5500mpas Maximum viscosity:
Noise level 50DB
Blood Roller Mixer is specially designed for the preparation of blood homogenous. It is commonly used in counting Platelets, RBC, and WBC counts on Hematology Analyzer. It is also used in the preparation of the solution like viscous substances, mixing blood samples, liquid-solid suspensions that need minimum aeration.
Specifications
Parameters
Values
Roller size
4 Nos. x 230 mm long
RPM
30 RPM/ 36 RPM
Mixing Time
15 to 20 Minutes
Weight
2.0 Kg. Net
Capacity
Container 6 Nos. (4ml) or 5ml x 15 Nos
Roller size
4 Nos. x 340 mm Long
RPM
30 RPM/ 36 RPM
Mixing Time
15 to 20 Minutes
Weight
2.4 Kg. Net
Capacity:zzz
Container 12 Nos. (4ml) or 5ml x 24 Nos
Digial Display Vortex Mixer is powered by a brushless motor and features an eccentric structural design.This innovative mixer effectively blends and mixes liquids inside a tube.
LCD Display with white back light
Speed Timer (1~99h 59m 59s)
Aluminum Alloy Base stable body
Soft silicone foot pads
Supply with Standard Head
Operating Mode - 2 Types - Auto run sensor, continuous run for various Mixing application.
Super shockproof, Bush less Motor.
Variable Speed Setting
2500 RPM
Orbit
4 mm
Brand
Labman
Model Name/Number
LMVM60D
Frequency
50 Hz
Weight
3.5 Kg
Dimensions (W X D X H)
250x220x190mm
Permissible Ambient Temperature
5C
Display Type
LCD Display With White Back Light
Base Material
Aluminium Alloy
Voltage V
220V
Display Function
Speed and Time
Humidity
<80%
Shaking Movement
Orbital
Input Power
60W
Oscillation Base MaterialMode
Circumference
Operation Mode
2 Types- Auto Run Sensor, Continuous Run
Vortex mixers are mainly used to mix beakers or small vials of liquid. The device itself is straightforward, consisting of an electric motor with a vertical drive shaft.The vortex speed is adjustable and usually ranges from 100 to 3,200 rpm.
Compact, rugged construction
Heavy metal base & rubber feet prevent movement of the shaker during use
Choice of continuous & touch mode
Variable speed control
Include one hand insert, micro tube insert & cup attachment
Made of Complete SS 304 GMP Model.Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 �¼ guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of SS 304
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz
Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.
Horizontal Laminar complete SS 304 GMP model.Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of stainless steel (SS-304grade)
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
Work Table: Stainless Steel (SS-304 grade)
Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Features
100 % air exhaust
Negative pressure air surrounding all biological contaminated parts
Class II, Type B2 cabinets are total exhaust cabinets, widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
There is no recirculation within the work area.
Room air enters through a blower/motor in the top of the cabinet and passes through a HEPA supply filter into the work area as the vertical unidirectional airflow.
Descending air is pulled through the base of the cabinet through the perforated front and rear grilles.
Simultaneously, air entering through the perforated front opening is pulled through the grille and exhausted immediately,
100% of the air is pulled into the facility exhaust system for appropriate treatment.
Type B2 cabinet is hard-connected to an exhaust system.
Negative pressure surrounds the work area with double-wall plenums for protection.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on the air leaving side; conforms to EU-4 /G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
Aerodynamic airflow grills maintain safety and prevents blockage.
U.V and fluorescent interlock available
Ergonomic and comfortable sloped front window for comfortable head and elbow rest position, thus reducing fatigue
Sash is counterbalanced for smooth and lightweight operation with a standard opening for easier access to the work zone and enhanced user safety.
CLASS-II design ensures PERSONNEL, PRODUCT and ENVIRONMENT PROTECTION.
Class II Biosafety Cabinet Protection
Personnel protection from harmful agents used inside the biosafety cabinet.
Product protection to avoid contamination of the works, experiment or process from outside contaminants.
Environmental protection from contaminants contained within the biosafety cabinet.
Class II Biosafety Cabinet Key Features
A front access opening with carefully maintained inward airflow.
HEPA-filtered, vertical, unidirectional airflow within the work area.
HEPA-filtered exhaust air to the room or exhaust to a facility exhaust system.
Class II Biosafety Key Applications
Typically used for biosafety levels 1 through 3 for low to moderate risk biological agents.
The type B2 total exhaust cabinets are widely used in toxicology laboratories and similar applications where chemical effluent is present and clean air is essential.
All types of Class II cabinets may be used in biosafety level 4 laboratories when workers utilize positive pressure suits. However, for level 4 Class III cabinets are recommended.
Upper & front cover
Removable upper and front cover simplifies filter, blower and front control panel replacements and maintenance easier.
Material of construction
Working Table is made up of Stainless Steel (SS-304). External Cabinet is fabricated of electrogalvanized powder coated OR Stainless Steel (SS-304) (as ordered).
Front Window/Sash
Front Sash consists of a thick plexi-glass or toughened transparent glass (Option) for a clear inside view. In addition it serves optimum resistance and protection from harmful UV rays, protection user from exposure to harmful Ultraviolet radiation.
Drain Trough with Valve
The trough at base is easy to clean and for offloading liquid spillage if any.
Decontamination by UV Lamp
UV Lamp to produce UV rays of 253.7 nanometers and fluorescent lamp are interlocked and the motor blower is turned off/on as and when the front sash is closed/opened. UV lamps function through a timer (Option) to control the decontamination cycle and maximize UV lamp life. The UV lamp shuts off once the desired set time of decontamination is over and switches the fluorescent lamp to ON position.
Splash Proof Electric Supply Socket
Splash proof sockets is provided for optimum convenience of using small electrical devices inside the cabinet.
Front Airflow Intake Grid
Aerodynamically designed front airflow intake grid eliminates potential turbulence and contamination.
Floor Stand and Castor Wheels
Floor Stand is made up of heavy-duty tubular pipe duly powder coated and fitted with durable castor wheels for rotation and total brake system on front wheels.
Controller
These models are provided with Microprocessor Based Digital Controller with LCD display and air velocity sensor to display the air velocity across the work table
These totally exhaust system are designed for 100% exhaust of HEPA filtered air outside the room through a exhaust duct protects user product as well as the laboratory. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Bio safety Cabinet Class II Type A 2 GMP model,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Bio safety Cabinet Class II Type A 2,Recirculates 70% of HEPA filtered air and rest 30% air exhausted through optional exhaust system. Fitted with Microprocessor LCD display controller with facility to display air velocity across work table.
Modular fully loaded chemical fumes extraction hoods after excellent performance and high suction power. Excellent chemical resistance & international quality electrical & gas connection utilities.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
4935 Laboratory Equipments Instruments Suppliers
Short on time? Let Laboratory Equipments Instruments sellers contact you.
