Find Verified Metal Metal Products Suppliers, Manufacturers and Wholesalers

Product : Aluminum UBC Scraps
Price : $1,700/MT
Origin : Kenya
Attachment : Less than 3%
Transit Time : Within 30 Days
Payment Terms : Our company policy has it that our payment terms are 30% on signing of contract 40% on loading and SEALING of container and 30% on original documentation AKA OBL#aluminium #ubc #scrap #aluminiumubcscrapdealer #ubcscrap #aluminiumubc

Product : Aluminum Ingots A7 Price : $2,800/MT
Quantity : 500MT
Purity : 99.7
Origin : Kenya
Loading Port : MOMBASA
Incoterms : CIF/FOB
Payment : TT
Payment Terms 50% after signing the contract and 30% after loading and sealing of the container and 20% against bill of landing

Used beverage can scrap, sorted and baled for recycling. Price depends on cleanliness, contamination, and bale density.

Advantages :
High Recyclability: Aluminium can be recycled repeatedly without losing its fundamental properties.
Lightweight: Offers an excellent strength-to-weight ratio, making it valuable for various aluminium applications.
Energy Efficient: Recycling aluminium generally requires substantially less energy than producing primary aluminium.
Good Recovery Value: Clean and properly sorted UBC scrap is a widely traded recyclable material.
Easy to Process: Baled and sorted UBC scrap can be efficiently transported and processed by recycling facilities.
Strong Industrial Demand: Used as feedstock for aluminium sheet, ingot, and other aluminium products.
Environmentally Beneficial: Supports resource conservation and reduces the need for primary aluminium production.

Used rail scrap for ferrous recycling and steel reprocessing. Price varies widely by grade, condition, and bulk size.

Advantages
High Steel Content: Provides valuable ferrous material for steel production.
Strong & Durable: Railway rails are manufactured from high-strength steel, making them suitable for recycling.
Recyclable: Can be melted and reused in the production of new steel products.
Cost-Effective: Offers an economical alternative source of ferrous raw material.
Industrial Demand: Used by steel mills, foundries, and metal recycling facilities.
Reduced Waste: Recycling used rails helps recover valuable metal and reduces landfill disposal.

Clean copper wire scrap with high recovery value, based on Melbourne market scrap ranges. Suitable for recycling and remelting.

Clean Copper Wire Scrap- Advantages
High Copper Recovery: Clean, unalloyed copper wire scrap offers excellent recoverable copper content.
High Conductivity: Recycled copper retains the excellent electrical and thermal conductivity associated with copper.
Cost-Effective Raw Material: Provides manufacturers and recyclers with a valuable secondary source of copper.
Recyclable: Copper can be recycled repeatedly without significant loss of its essential properties.
Wide Industrial Demand: Used as a raw material for producing copper rods, wires, cables, tubes, and other copper products.
Easy Processing: Clean wire with minimal contamination can be efficiently sorted, processed, and recycled.
Environmentally Beneficial: Recycling copper reduces the need for primary mining and can lower energy consumption compared with producing copper from virgin ore.

We supply used rails (R50 and R65) Sourced from reliable suppliers and suitable for recycling and industrial use. The material is free from hazardous and radioactive contamination and complies with international scrap standard. Inspection can be conducted by SGS or other internationally recognised agencies at the loading and destination ports. We offer flexible shipment options including containerized and bulk cargo under CIF terms

We supply high-quality Aluminium UBC(used Beverage can)Scrap sourced from verified suppliers. The material is processed, cleaned and baled with high Aluminium purity and minimal contamination. It is suitable for recycling and remelting for industrial use. Supply is available in bulk quantities with reliable shipment under CIF terms.
Third partie inspection can be arranged upon buyer request to ensure quality and transparency.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Our iron ore pellets and fines are made from magnetite and have high iron ore content pellets at around 67 percent concentration and fines over 70 percent. This means they have lower impact on the environment than competing pellets and products such as sintered hematite fines.

Using pellets instead of sinter (slightly larger pieces of iron ore) in customers pig iron processes saves emissions at steel plants. The high concentration of iron combined with the carefully tested and balanced additives in our pellets also result in lower emissions in customers ironmaking processes.

Iron ores are the raw material used to make iron and steel. Iron ore production has significantly expanded in recent years, owing to increasing steel demands in developing countries, such as China. As the content of iron ore in deposits has deteriorated, low-grade iron ore has been processed. Iron ore concentrate is an output product from processed iron ores that have been milled (crush, grind, magnetic separation, flotation) to separate deleterious elements and produce a high-quality product. Sintering and pelletizing are economic and widely used agglomeration processes to prepare iron ore fines/iron concentrate for ironmaking use. The quality requirements of sinter and pellet, such as physical, chemical, and metallurgical specifications, depend on each ironmaking furnace, and those requirements influence the operation of the iron ore sintering and pelletizing plant. Researchers have usually focused on the effect of the chemical, physical, and mineralogical characteristics of iron ore on these steps and the consequences for sinter/pellet quality and sintering/pelletizing performance. The present Special Issue on Iron Concentrate Particles will summarize the progress achieved in the last five years.

A billet is a length of metal that has a round or square cross-section, with an area less than 36 in2 (230 cm2). Billets are created directly via continuous casting or extrusion or indirectly via hot rolling an ingot or bloom. Billets are further processed via profile rolling and drawing. Final products include bar stock and wire.

Centrifugal casting is also used to produce short circular tubes as billets, usually to achieve a precise metallurgical structure. They are commonly used as cylinder sleeves where the inner and outer diameters are ground and machined to length. Because their size is not modified significantly, they are not always classified as semi-finished casting products.

Primary aluminium ingots for casting, manufacturing, and industrial supply.

Advantages
High Strength-to-Weight Ratio: Lightweight while providing good mechanical strength.
Excellent Corrosion Resistance: Naturally forms a protective oxide layer that helps resist corrosion.
Good Conductivity: Suitable for electrical and thermal applications.
Excellent Castability: Can be efficiently melted, cast, extruded, and fabricated.
Highly Recyclable: Aluminium can be recycled repeatedly while retaining its essential properties.
Wide Industrial Demand: Used extensively in automotive components, construction products, electrical equipment, machinery, and packaging.
Export-Friendly: Available in different alloy grades and ingot sizes according to buyer requirements.

Commodity : Copper Cathodes 99.99%
Order Qty : 6,500 Metric Tons (MT)
Contract Length : 45 days
Inspection : Alex Steward International ASI
Price : USD $7,500/MT
Trade terms : Cost Insurance Freight (CIF)
Currency : United States Dollars (USD)
Types : Electrolytic Copper Cathodes
Origin : Democratic Republic of Congo
Port of Loading : Dar Es Salaam Port,TZ
Port of Delivery : To Be Announced
Payment Terms : Telegraphic Transfer, Swift MT103, 10% prepayment against proforma invoice, 10% against copies of full shipment documents, Balance 70% upon confirmation of quantity and quality of stock after delivery

Heavy melting steel HMS or heavy melting scrap is broken up into two major categories HMS 1 and HMS 2 where HMS 1 does not contain galvanized and blackened steel whereas HMS 2 does HMS is typically traded as a blend of 1 and 2 either a premium blend 8020 or lower grade mixes 7030 and 6040 For example HMS 1 and 2 8020 should consist of HMS 1 and 2 in the ratio of 80 HMS 1 and 20 HMS 2

Each grade guarantees a minimum piece thickness at least 14 inch 63 mm for HMS 1 and 18 in for HMS 2

HMS 1 and 2 specifications as defined by ISRI North Americas Institute of Scrap Recycling Industries

ISRI SPEC 200 HMS 1 Wrought iron andor steel scrap 14 inch and larger in thickness All pieces must be smaller than 6024 in
ISRI SPEC 201 HMS 1 Same as ISRI 200 except pieces must be smaller than 3618 in
ISRI SPEC 202 HMS 1 Same as ISRI 200 except pieces must be smaller than 6018 in
ISRI SPEC 203 HMS 2 Wrought iron andor steel scrap black and galvanized 18 inch and larger in thickness
ISRI SPEC 204 HMS 2 Same as ISRI 203 except pieces must be smaller than 3618 in
ISRI SPEC 205 HMS 2 Same as ISRI 204 except it may contain automotive scrap except for thin guage material
ISRI SPEC 206 HMS 2 Same as ISRI 205 except pieces must be smaller than 6018 in

Coltan (Columbite-Tantalite Concentrate)

We hereby wish to confirm with full legal responsibility, under the penalty of perjury, that we are the principal sellers of the commodity with its specifications mentioned below. We are ready to offer 100 MT at a competent price.

We are Ready, Willing and Able to offer high purity Coltan (Columbite-Tantalite Concentrate) with below specifications:

TECHNICAL CHEMICAL COMPOSITION:
A. Purity
Coltan (Columbite-Tantalite Concentrate) TaO 38%,
Niobium Pentoxide NbO 15%

B. Impurity Limits
W 0.5%, Sb 0.005%, Cu 0.2%, P 0.5%


C. Radioactive Compliance
The activity concentration of radionuclides (K) are within Chinese import standards with:
Any nuclide in the¸U, Ra, or Th decay chain 1 Bq/g10 Bq/g


SPECIFICATIONS
Commodity : Coltan (Columbite-Tantalite Concentrate)
Purity : 38% Tantalum Pentoxide (TaO)
Trial Quantity : 100 MT (One Hundred Metric Tons)
Contract Quantity:To Be Established After Trial Order
Origin : Rwanda
Incoterms : CIF/FCR
Form : Dry, free-flowing granules, be free of oil, waste, or foreign materials.
Packaging : Metallic Drums
Markings : Batch number, TaO/NbO content, gross/net weight
Granulometry : 2 mm maximum
Destination : AWSP
Inspection : Independent International laboratory i.e Alex Stewart, CCIC, Bureau Veritas, SGS or other
inspection company)
Price : 1.2 USD Per Kilogram calculated on purity %
Payment Terms: TT with full payment at the destination warehouse

NOTE: If TaO < 30% and NbO < 15%, the buyer reserves the right to reject the whole shipment or renego-tiate price.

EXPORT DOCUMENTS

- Certificate of Origin/Export Permit;
- Assay Report of Quality;
- Commercial Invoice;
- Packing List;
- Certificate of non-radiation;
- Ownership Certificate;
- CIGLR Certificate for conformity;
- T1 Release Order
- Air Waybill

We hereby wish to confirm with full legal responsibility under the penalty of perjury that we are the principal sellers of the commodity with its specifications mentioned below We are ready to offer 5000 MT at a competent cost

We are Ready Willing and Able to Grade A Copper Cathode of CATH Standard with below specifications

Commodity A Grade Electrolytic Copper Cathode
Purity 9999 Cu
Minimum Quantity 1000 MT One Thousand Metric Tons
Contract Quantity To BE Established
Origin Democratic Republic of Congo
Incoterms CIF Any safe world port
Shape LME Standard 914mm x 914mm x 12mm
Packing Palletized aluminum banded
Weight per sheet 125kg 1
Net weight per pallet 25 Metric Tons 1
Material To be free from contamination by radiation
Destination AWSP
Inspection Quality Quantity SGS or other inspection company
Price 25 Less LME
Payment Terms MT103 TT with FINAL payment at the destination warehouse

QUALITY CHEMICAL COMPOSITION

Element Value StandardSpecification
Copper Min 9999 ASTM B115 Grade 1 EN 1978
Silver Ag 005 BS EN 1978
Iron Feppm 001 ASTM B115 BS EN 1978
Sulfur Sppm 001 BS EN 1978
Oxygen O2ppm NIL ASTM B115
Lead Pbppm 0005 ASTM B115
Nickel Nippm 0005 ASTM B115
Arsenic Asppm0002 ASTM B115

EXPORT DOCUMENTS

Certificate of OriginExport Permit
Assay Report of Quality
Commercial Invoice
Packing List
Certificate of nonradiation
Ownership Certificate
CIGLR Certificate for conformity
Bill of Lading

Cast Alluminum Can Be Recycled And Moulded Into Engine,rims Etc

Manganese