Find Verified Electric Power Supply Components Suppliers, Manufacturers and Wholesalers

BSGH electric motor recycling machine recycles scrap copper motors with high efficiency, integrating cutting function and copper pulling function in the same machine. Scrap motor recycling machine BSM-20 has a cutting part and two copper-pulling parts. The cutting part is used to cut one end of the waste motor stator and two copper-pulling parts are suitable for pulling out copper winding wires of different types and sizes of motor stators.
First, you can use the cutting part to cut used motor stators. Then you can use pulling parts to pull copper winding out from motor stators, such useful a tool.

Electric Motor Recycling Machine Details:
Name: Electric motor recycling machine
Machine Weight: 450/414kg
Machine Size:1220*940*920/1350*1020*970MM
Machine Power: 5.5KW
Motor Voltage: 380V/customized

Do you need to recycle copper from your waste motors?

The electric motor puller machine from the a kind of copper recycling machine, used to pull all the copper winding wires from the motor stator.
BSM-30 electric motor puller machine often works together with copper motor cutting machine, better recycling all the copper winding wires from the waste motor stator.

Technology data of copper motor pulling machine:
Machine model: BSM-30
Machine size: 2310*770*950mm
Machine weight: 395kg
Packing size: 2010*820*1050MM
Packing weight: 420kg

How to process scrap motor for copper

If that bothers you, no worry, we will provide you suitable solution. This working video show you our electric motor wrecker machine working process:
Pulling and recycling copper from scrap motor stator quickly and efficiently.

Better recycling copper from stator, you need to do as follows:
1: Cut motor stator in the first step;
2: Pull and recycle all copper winding wires from stator;

Electric motor cutting pulling machine ST-400 with three phase electricity in hot selling.

How to quickly remove copper from your electric motors
ST-400 motor cutting pulling machine is useful. Has cutter and puller, cutter is good for cutting motor stator, puller is good for pulling copper from scrap motor.
Want to recycle copper from motor Please , we are able to provide you best copper recycling solution.

BSM-40 motor wrecker machine is used to recycle copper from the motor, has multi-function, and can cut and pull copper from motors.

These three pulling parts are fit for recycling different kinds of scrap motor, and this motor wrecker machine can process the motor stator diameter is 50-500mm.

Electric Motor Stator Recycling Machine Technical Data:
Machine Name: Electric motor stator recycling machine
Machine model: BSM-40
Motor Power: 5.5KW
Machine Size: 1940*1430*1150MM
Machine Weight: 670kg
Are you interested in this motor recycling machine BSM-40

Electric bike rear wheel copper pulling machine belongs to a kind of motor wrecker machine, suitable for recycling scrap electric bicycle rear wheel motor. This model electric vehicle rear wheel motor pulling machine can pull copper winding wires from scrap motor, often work together with electric vehicle rear wheel motor cutting machine to better recycle scrap copper from the waste motor.

Processing Capacity: 300pcs/h
Machine Weight: 405KG
Motor Power: 4KW

Electric vehicle rear wheel motor cutting machine is designed for cutting copper winding wires for easy to recycle copper winding wires from waste electric bicycle rear wheel motor.
This electric bicycle rear wheel motor cutting machine often works together with our electric bicycle rear wheel motor pulling machine to recycle copper winding wires from the waste motor, belongs to an efficient and useful electric motor recycling machine.

Machine name: electric bike rear wheel motor cutter
Motor power: 3KW
Machine size: 980*850*940mm
Machine weight: 170kg
Processing capacity: 300pcs/h

BS-S05 mini cable granulator machine is the smallest copper recycling machine, used for separating and recycling scrap copper from cable wires.
This model home wire granulator has a mini machine size and mini capacity, and supports single-phase electricity.
Mini machine size: Machine size is about 750 500 1400mm;
Mini capacity: Processing capacity is about 20-40kg per hour;
Support single-phase electricity: Support single-phase electricity and can customize machine voltage and frequency.
This mini copper cable recycling machine BS-S05 is our hot selling model now, and we have sold more than 100 sets. Ans this home wire granulator machine is very very popular in scrap yards because of its mini machine size and mini capacity.

Technology data of this mini cable granulator:
Machine Model: BS-S05
Processing Capacity: 20-40kg per hour;
Motor Power: 4KW
Machine Size: 750 500 1400MM
Machine Weight: 165kg

Car alternator recycling machine is designed for recycling copper from scrap car alternators or car generators.

1: Used to recycle car alternator and generator, can cut and pull copper from scrap car alternator and generator efficiently;
2: Has high machine quality and good machine performance;
3: Has the most advanced technology and best services;
4: Equipped with a pure copper motor, has strong power and best process effect;

This electric motor stator cutting machine is a kind of motor wrecker machine. As a cutting tool, that can cut waste motor for copper recycling. Not only can cut motor stator, but also can cut motor shell.

Has two kinds of knives, including flat knives and sharp knives:
Flat knives are used to cut motor shells for removing motor shells;
Sharp knives are used to cut motor stators (copper winding wires);

Often work together with copper motor pulling machine for better recycling copper scrap from motor;
Easy operation and save time and manpower, very useful for scrap copper recycling;
Equipped with copper motor, strong and powerful;

Technology data of motor cutter machine as follows:
Machine model: BSM-50
Motor power: 7.5kw
Machine weight: 650kg
Machine size: 750*550*2150mm
Do you need to recycle your scrap motor? Welcome to know more:

BSGH copper motor cutting pulling machine ST-400 is an electric automatic copper recycling machine, using a hydraulic system to cut and pull scrap motor stator, and then remove and separate copper winding from scrap motors. Our motor wrecker recycling machine also has motor cutting and copper pulling function, simple operation and high working efficiency, making this kind of motor recyclers popular in Europe market.

Machine Model: ST-400
Machine capacity: 8-30pcs/h
Motor stator diameter: 90-250mm
Machine Weight: 1100kg
Machine Size: 1800*900*950MM
Machine voltage: 3 phase
Machine Power: 5.5KW

Bestseller cable granulator machine BS-D20 is used to process waste cables that cannot be processed by a wire stripping machine, including automobile cables, communication cables, scrap wires, electric wires, and other cables diameter within 25mm.
Copper and plastic are vibrated and separated by an air separator and vibrating tables after crushing, which can completely separate copper and plastic, and achieve the purpose of recycling waste cables. Of course, you also can add an electrostatic separation device on a copper wire granulator machine that can make the recovery rate of scrap copper close to 100%, which brings high economic benefits.


Technical data of cable granulator machine:
Model: BS-D20
Processing dimension: Below 20mm
Machine Capacity: 200KG/H
Machine weight: 1600KG
Machine size: 2700*1700*2100mM
Motor power: 28KW
Motor voltage: 380V/220V/customized

Welcome to know more about this small cable granulator machine

This feedback video of BS-D70 small wire chopper comes from our Thailand client.

Our dear client likes our copper recycling machine very much, because copper and plastic are separated cleanly from cable wires with help of this model
BS-D70 small copper wire recycling machine fits for home use very well, not only supporting three-phase electricity, but also support single-phase electricity.
If you want to process scrap wires and recycle copper from these wires, BS-D70 copper recycling machine will be your first choice. Are you interested?

Large capacity copper cable granulating machine BS-A1100 is our BSGH largest capacity copper wire recycling machine, which can process almost all types of waste cables with a capacity of 1.5-2T per hour.

BS-A1100 copper cable granulator machine adopts an automatic pusher system for feeding scrap wires and forklift loading and feeding electric wires Instead of traditional manual feeding, feeding amount is large at a time and feeding speed is fast.
A fully automatic operating system makes our wires copper recycling machine only need 1-2 skilled workers to operate too quickly and efficiently separate copper and plastic from waste cables so as to let you get the pure copper and pure plastic in the end.

Technology data of copper cable recycling machine:
Model: BS-A1100
Processing capacity: 1.5-2T/H
Separation rate: 99.9%
Machine weight: 17tons
Motor Power: 128KW
Motor Voltage: 380V/220V/customized

Copper wire recycling machine BS-N130 granulates and separates copper and plastic from electric wires, processing capacity is about 600-800kg per hour. After the crushing and separating process, scrap cable wires can be recycled into clean copper rice with a 99.9% high copper separating rate, are you interested

For different kinds of scrap wires, the wire recycling machines capacity is as follows:
1. For 4 6 square wire, capacity can reach 600-800KG/H
2. For 1.5 2.5 square wire, capacity can reach 500-700KG/H
3. For car wire and plug wire, copper content is 45-50%, and capacity can reach 400-60KG/H
4. For mixed wire, copper content 20-30%, capacity can reach 300-500KG/H.


Technology data of copper wires separator recycling machine:
Name: Copper cable wire separator recycling machine
Model: BS-N130
Processing dimension: Below 50mm
Machine Capacity: 600-800KG/H
Machine weight: 5000KG
Machine size: 1200*3500*2250MM
Motor power: 67KW
Motor voltage: 380V/customized

Good scrap wires need good copper wire recycling machine to process, so do you need it

small copper granulator machine BS-D75 is in running for our Nanjing client. After finish testing, this model BS-D75 wire granulator will be transport
Small capacity, capacity is 50-80kg/h;
Support single-phase electricity, fit for home use.

BSM-10 motor stator pulling machine is a multifunctional machine for motor copper recycling that integrates two functions of cutting motor and pulling copper winding wires. Cutting parts of the motor recycling machine can cut scrap motor, pulling parts of electric motor wrecker can pull copper winding from used motors and 3 pulling parts are suitable for different sizes motors.
Motor stator recycling machine can deal with the waste motor in the range of 50-500mm, which has a large processing range and strong function, and motor wrecker machine capacity is about 60-180 pieces motors per hour, high efficiency

Cutting part: cut the motor stator range 50-180mm , hydraulic copper cutter, can cut off the stator one side copper wire;
Puller 1#: pulling the motor stator range 50-180mm, hydraulic copper pulling, grasp the copper winding from one side;
Puller 2#: pulling the motor stator range 50-140mm, hydraulic copper pulling, grasp the copper winding from one side;
Puller 3#: Pull the motor stator 150-500mm, elevator, big size motor stators, use these working parts, same grasp the copper winding out.

Technical data of motor copper recycling machine:
Model: BSM-10 motor stator pulling machine
Processing motor range: 50-500MM
Machine gross weight: 690kg
Machine net weight: 670kg
Machine size: 2400*1100*1300
Motor power: 5.5KW
Motor voltage: 380V /customized

What is twin shaft shredder machine

This is a customized metal shredder with red color, used to cut and shred soft scrap metal, such as scrap copper, scrap aluminum, scrap iron, scrap steel, and so on.

Are you interested in this copper shredder
Equipped with two copper motors, one on each side of the shredder;
High machine quality and good machine performance, also have a long machine life.
Low speed and high torque, low noise and low dust;
PLC control, equipped with an independent electric box, is safe and reliable

BS-D70 small copper granulator machine is a small size, small processing capacity, more suitable for household use. BS-D70 small copper granulator machine can process about 70kg of waste cables per hour and the separation sorting rate is about 99.9%. BS-D70 scrap copper recycling machine has a crusher, dust collection system, air separator, vibrating table, and so on. This mini copper wire granulator machine through the crusher separator system, help you get the pure copper and pure plastic at the final. The most important thing is that the BS-D70 copper granulator machine can use single-phase power or three-phase power and customized voltage, which is very convenient. It is really very useful and efficient.
Model: BS-D70 small copper granulator
Processing dimension: Below 20mm
Machine Capacity:70KG/H
Machine weight: 1000KG
Machine size: 1800*1400*2100MM/1700*1500*2000MM
Motor power: 14/16KW
Motor voltage: single phase/three phase voltage

Transformer recycling machine is mainly used to recycle a variety of small transformers.
First, the scrap transformer is cut in half by a cutter of the transformer cutting machine, and then the puller of the transformer pulling machine pulls out copper winding from the processed transformer to complete the whole copper winding wires recovery.

Transformer cutting pulling machine details:
Name: Electric Transformer Breaking Machine
Machine Weight: 240kg
Package Weight: 300kg
Machine Size: 120*73*123cm
Package Size: 84*110*85cm

Transformer recycling machine advantages:
1. Mainly used to deal with small used transformers;
2. Small size and high efficiency;
3. Save time and effort, also has a low price;