Find Verified Personal Computers Suppliers, Manufacturers and Wholesalers

Pulse hot press used in product manufacturing process: soft line FFC and soft circuit board of FPC or rigid circuit board welding of PCB, TCP and PCB circuit board or a soft circuit board of FPC between the welding, soft circuit board of FPC and PCB between the circuit board welding etc


The product is used in welding pulse hot pressing machine and it is pulse heating welding, through the pulse current heating thermocouple transmission to joint parts in close contact, without the heat effect on peripheral devices

This product is used in pulse welding machine, It is the pulse welding Heating body, It by thermocouple transmission pulse electric current to Heat, make the joint part is in close contact condition, with no heat Affected around the device.
Usage:
Our products are widely used in various electronic components with a Small coil manufacturing production, Used in high-frequency Communications components, SMD transformers, SMD chip inductors, Winding inductanceï¼?Coil inductors,miniature,Speakers, induction IC card, Proximity card,Proximity key,RF Inlay smart card,buzzers, receivers, speakers, headphones, Antennas, microphones, transducers, hands-free headset, vibration Motor, micro-motors, clocks coil, the coil module and other small Electronic components soldered contacts and also can weld metal wire, Metal strip, metal sheet, a solar cell, the data lines, Telecommunications lead solder contacts.

Welding head classification:
1. Resistance Welding Heads
2. Spot Welding Heads,
3. Butt Welding Head,
4. Hot Bar Reflow Soldering Heads
5. Ultrasonic Welding Machine Welding Head
Note: Document prices and pictures are for reference only, We will according to customers drawings or samples of spot welding head for quotation.

Advantage:
Pulse hot press mainly used in normal SMT reflow oven should not perform welding device for welding operation, and the use of iron welding is easy to occur when welding appearance inconsistent, uneven, prone to dry and easy to weld the bad products. While the pulse hot press is different from the temperature soldering iron, pulse hot press in electrified instantly achieve the desired temperature, and once the head ends without voltage, instantly to reach room temperature; and the welding head flat, so the welding flat appearance, rarely weld bad.

The Flood Led Light use the LED technology with very high luminous efficiency to generate the luminous flux most performing on the market. The strengths of these projectors are more brightness and brilliance with lower consumption, seven models available for all needs, powers up to 600watt (unique on the market) and three types optics . DRACO projectors are ideal for skilful lighting architectures and areas to achieve maximum performance with high aesthetic quality.Reference standards: EN 60598-1, EN62471, EN55015, EN61547, EN61000-3-2, EN61000-3-3.Guidelines: 2011/65/CE, 2006/95/CE, 204/108/CE.RoHS - IK08 â?? CE - IP66 - RGO . Example : 600W led replace 2000W JM , 270w LED REPLACE 1000w JM

Charge end, duration of equalized charging phase:
Each hour 5’ (repeated for 48 hours), calculation to
Determine the size of suitable battery charge: 16a
For every 100 ah of the battery (e.G. 500 ah battery:
16ax5 = 80a).

Suitable for cyclic recharge of lead – acid
Batteries and floating of sealed gel and /
Or lead - acid batteries, high frequency
Technology, compact design, protected
From wrong polarity and short circuit
Proof, feeding 110/240v.
Ip-66 degree (no ingress of dust;
Complete protection against contact -
Dust tight, water projected in powerful
Jets (12.5 mm nozzle) against the
Enclosure from any direction shall have
No harmful effects).

Over voltages, polarity reversal, anomalies.
Error code of any anomaly, inner self ventilation
Through forced air, efficiency > 85%, mass-produced
Mains leads, input cable, connection to the battery
Through anderson-rema power terminals.

Nfm
Switching battery charger, high frequency technology,
Fully controlled by microprocessor.
240v single-phase +- 10%, luminous display for a
Easy reading of the charging parameters.
Different charging curves in accordance with the kind
Of battery and choose among 16 standard curves,
Preprogrammed valid for pb-acid, gel.
Battery voltage and charge current can be changed
Through the button in the front panel.
“soft start” mode and display of the charging cycle
With led .
Electronic protection and/or fuse against short circuits
Over voltages, polarity reversal, anomalies.
Error code of any anomaly, inner self ventilation
Through forced air, efficiency > 85%, mass-produced
Mains leads, input cable, connection to the battery
Through anderson-rema power terminals.

Nfc
Switching battery charger, high frequency technology,
Fully controlled by microprocessor.
240v single-phase +- 10%, luminous display for a
Easy reading of the charging parameters.
Different charging curves in accordance with the kind
Of battery and choose among 16 standard curves,
Preprogrammed valid for pb-acid, gel.
Battery voltage and charge current can be changed
Through the button in the front panel.
“soft start” mode and display of the charging cycle
With led .
Electronic protection and/or fuse against short circuits
Over voltages, polarity reversal, anomalies.
Error code of any anomaly, inner self ventilation
Through forced air, efficiency > 85%, error code
Display missing, mass-produced input network cable,
Output cables polarized.

10v and/or 220v as default.
Each ptek rvhf battery charger is equipped with external aluminium cover box,
Input cable and battery cables (for small one equipped with a fast connection
Crocodile).
Switching battery charger high frequency technology, feeding 100 ÷ 240v singlephase
+- 10%, digital display only for d version, different charging curves selectable
For pb-acid, gel, “soft start” mode, electronic protection and/or fuse against short
Circuits over voltages, polarity reversal or anomalies, input cable, connection of the
Battery included, inner self contained ventilation through forced air, efficiency >
85%, mass-produced mains leads.

r control is designed to
Optimize the charging cycles for any type of battery, 230v coil single-pole contactor,
D.C. Fuse on rectifier output, delta-star stray flux single-phase power transformer
Class h; impregnated in autoclave with ecological epoxy resins, with thermocouples
For disconnection due to maximum temperature, single-phase rectifier bridge with
Silicon diodes, natural cooling, with snubber protection, mains input and d.C. Output
Polarized cables, modular installation on galvanized steel base, sheet steel case with
Modular panels so as to assure maximum accessibility in case of service, epoxy
Powder coating, oven-baked, standard colour: ral 2002 red, new lexan plate with
Charging data very easy to understand, equalized recall push button, on - off push
Button, option to adjust the charging time from 90 to 210 minutes, option to adjust
The threshold voltage from 2.3 to 2.4 v/cell., equalization charge timed, led signaling
Charging phases or result, short check of functions and times, option to program
The equalized charge automatically, lab-tested electronic circuit conforming to the
Directive on electromagnetic compatibility and ce marking, automatic disconnection
Of battery charger due to battery disconnection, option: custom-made color, logo and
Silk-screen printing, option: assembly of plugs and battery connectors on request.

Icroprocessor control is
Designed to optimize the charging cycles for any type of battery, single mains input
Fuses, auxiliary transformer suitable for the supply voltage, d.C. Fuse on rectifier output,
Delta-star stray flux single-phase power transformer, tenvex copper windings with
Double enamel insulation; class h; impregnated in autoclave with ecological epoxy
Resins, with thermocouples for disconnection due to maximum temperature, singlephase
Rectifier bridge with silicon diodes, natural cooling, with snubber protection,
Mains input and d.C. Output polarized cables, modular installation on galvanized
Steel base (type a: 20/10, type b :30/10), sheet steel case with modular panels
So as to assure maximum accessibility in case of service (type a : 10/10 - 12/10,
Type b : 12/10 – 15/10), epoxy powder coating, oven-baked, standard color: ral
2002 red, lab-tested electronic circuit conforming to the directive on electromagnetic
Compatibility and ce marking, equalization charge timed, automatic start, automatic
Disconnection of battery charger due to battery disconnection, smart charging system
According to the discharge level of the battery, short check of functions and times,
Option: custom-made colour and custom-made logo and silk-screen printing, final
Acceptance test conforming to safety regulations, charging with decreasing current
(wa characteristic): 9÷11 h charging time, charging with decreasing current (wo -
Wa characteristic): 7÷8 h charging time, complete with mains and battery cables;
Assembly of plugs and battery connectors on request.

With decreasing
Current (wa characteristic): 9÷11 h charging time, transformer thermal protection,
Modular installation on galvanized steel base (20/10) – (30/10), sheet steel case
With modular panels (10/10 - 12/10) - (12/10 – 15/10), epoxy powder coating, ovenbaked,
Standard colour: ral 2002 red, option: custom-made colour, logo and silkscreen
Printing, mains input and d.C. Output polarized cables, complete with mains
And battery cables; assembly of plugs and battery connectors on request.
“wa” characteristic (din 41774):
Charge at decreasing current with intervention of the final charge at
2.40 v/cell., final charge with timed control 9h / 11h, fixed charging
Time (equalization charge excluded), equalization charge (week-end
Charge) to be recalled. It will start after 55’ from charge end, duration
Of equalized charging phase: each hour 5’ (repeated for 48 hours),
Calculation to determine the size of suitable battery charge: 16a for
Every 100 ah of the battery (e.G. 500 ah battery: 16ax5 = 80a).

Ptek nr3 three phase is designed to recharge medium - large capacity traction and
Start lead-acid batteries, developed using our forty-year experience in the field of
Battery chargers and multi-years application of microprocessor control systems which
On, short check of functions and
Times, option to program the equalized charge automatically, lab tested electronic
Circuit conforming to the directive on electromagnetic compatibility and ce marking,
Automatic disconnection of battery charger due to battery disconnection, equalization
Charge based on time, charging with decreasing current (wa characteristic): 9÷11
H charging time, transformer thermal protection, modular installation on galvanized
Steel base, sheet steel case with modular panels, epoxy powder coating, oven-baked,
Standard colour: ral 2004 orange, option: custom-made color, logo and silk-screen
Printing, mains input and d.C. Output polarized cables, complete with mains and
Battery cables; assembly of plugs and battery connectors on request.
“wa” characteristic (din 41774):
Charge at decreasing current with intervention of adjustable final
Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h /
11h, fixed charging time (equalization charge excluded), equalization
Charge (week-end charge) to be recalled. It will start after 55’ from
Charge end, duration of equalized charging phase: each hour 5’
(repeated for 48 hours), calculation to determine the size of suitable
Battery charge: 16a for every 100 ah of the battery (e.G. 500 ah
Battery: 16ax5 = 80a).

Ptek nre3 three phase is designed to recharge medium - large capacity traction
And start lead-acid batteries, developed using our forty-year experience in the field
Of battery chargers and multi-years application of microprocessor control systems
D electronic circuit conforming to the
Directive on electromagnetic compatibility and ce marking, automatic disconnection
Of battery charger due to battery disconnection, equalization charge based on
Time, charging with decreasing current (wa characteristic):9÷11 h charging time,
Transformer thermal protection, modular installation on galvanized steel base, sheet
Steel case with modular panels, epoxy powder coating, oven-baked, standard color:
Ral 5003 blue, option: custom-made color, logo and silk-screen printing, mains
Input and d.C. Output polarized cables, complete with mains and battery cables;
Assembly of plugs and battery connectors on request.
“wa” characteristic (din 41774):
Charge at decreasing current with intervention of adjustable final
Charge from 2.35 to 2.40 v/cell., final charge with timed control 9h /
11h, fixed charging time (equalization charge excluded), equalization
Charge (week-end charge). It will start after 55’ from charge end,
Duration of equalized charging phase: each hour 5’ (repeated for 48
Hours), calculation to determine the size of suitable battery charge:
16a for every 100 ah of the battery (e.G. 500 ah battery: 16ax5 =
80a).

Ptek tc3 three phase is designed to recharge medium - large capacity traction and
Start lead-acid batteries, developed using our forty-year experience in the field of
, three-phase rectifier
Bridge with silicon diodes, natural cooling, with snubber protection, mains input and
D.C. Output polarized cables, modular installation on galvanized steel base, sheet
Steel case with modular panels so as to assure maximum accessibility in case of
Service, epoxy powder coating, oven-baked, standard colour: ral 2002 red, new
Lexan plate with charging data very easy to understand, equalized recall push
Button, on - off push button, option to adjust the charging time from 90 to 210
Minutes, option to adjust the threshold voltage from 2.3 to 2.4 v/cell., equalization
Charge timed, led signaling charging phases or result, short check of functions and
Times, option to program the equalized charge automatically, lab-tested electronic
Circuit conforming to the directive on electromagnetic compatibility and ce marking,
Automatic disconnection of battery charger due to battery disconnection, option:
Custom-made color, logo and silk-screen printing, option: assembly of plugs and
Battery connectors on request.
Charge at decreasing current with intervention of the final charge
At 2.40 v/cell, final charge with timed control 9h / 11h, fixed
Charging time (equalization charge excluded), equalization
Charge (week-end charge) to be recalled. It will start after 55’
From charge end, duration of equalized charging phase: each
Hour 5’ (repeated for 48 hours), calculation to determine the size
Of suitable battery charge: 16a for every 100 ah of the battery
(e.G. 500 ah battery: 16ax5 = 80a).

Attery charger due to battery
Disconnection, smart charging system according to the discharge level of the battery,
Short check of functions and times, option: custom-made colour and custom-made
Logo and silk-screen printing, final acceptance test conforming to safety regulations,
Charging with decreasing current (wa characteristic): 9÷11 h charging time, charging
With decreasing current (wo - wa characteristic): 7÷8 h charging time, complete
With mains and battery cables; assembly of plugs and battery connectors on request.
Wa (din 41774):
Charge at decreasing current with intervention of the
Final charge at 2.40 v/cell, final charge with timed
Control 9h / 11h, fixed charging time (equalization
Charge excluded), equalization charge (week-end
Charge) to be recalled. It will start after 55’ from
Charge end, duration of equalized charging phase:
Each hour 5’ (repeated for 48 hours), calculation to
Determine the size of suitable battery charge: 16a
For every 100 ah of the battery (e.G. 500 ah battery:
16ax5 = 80a).

Wo-wa:
Charge at decreasing current with intervention of the
Final charge at 2.42 v/cell, final charge with timed
Control 7h / 8h, fixed charging time (equalization
Charge excluded), equalization charge (week-end