SPECIFICATIONS:
Dimensions:
Total Length mm 930 Width mm. 650 Height mm. 1070
Floor Length mm 870 Width mm. Ground Clearance 620 mm. 330
Weights:
Total kg including batteries. 77.90
Batteries kg. 13 each. x 2
Motor:
Permanent magnet motor with electric 200 W - rpm 120 - 24 V electro 24VDC 2Nm.
Voltage and batteries:
no Two 12V batteries 32 A C5 sealed gel - series connection, without maintenance.
External charger 24 v - 8 ampere - Electronic microprocessor - Power supply 220 v.
Brakes:
Electric brake block engine, listing in the event of power failure.
braking on deceleration (engine braking) enhanced in the calibration of the parameters of the controller.
Speed and Capacity (performance with the vehicle in perfect working order on flat surface:
Max 5 Km / h + / - 10%
Max 250 kg. terms and 100kg. slope of 15%.
Maximum flow rate is considered with the load distributed uniformly on the floor.
Tires:
2 wheels rubber tires mounted on rims with pneumatic 3.00-4 6-ply roofing.
2 wheels 200x50 diameter core polypropylene gray synthetic rubber ring mounted on swivel mounts.
Frame:
Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 6018
Spare parts and tools for the maintenance and repair:
Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.
Hydraulic top link with shock absorber mod. 3A 120 complete with Walterscheid quick release for tractors with powers between 300 and 400Hp
IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK
The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting
The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties.
The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment.
The installation requires no special components and no additional spaces are required
We remind you that this accessory brings the following ADVANTAGES:
+ Comfort: protects the operator from blows from jumping implements during transport
+ Efficiency: increases front axle grip
+ Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings
+ Safety: improves the traction of the tractor while driving on the road by absorbing shocks
+ Productivity: Reduced travel times on the road and in the field
- Maintenance: important reduction in maintenance costs of the tractor and of the operating machines� due to less wear on the components
Hydraulic top link with shock absorber mod. 3A 105 complete with Walterscheid quick release for tractors with powers between 200 and 300Hp
The third point is READY TO USE, including fork, pin and pair of 880L 3/8 pipes and G3/8 fitting
IT IS NOT JUST A THIRD POINT, BUT AN AGRICULTURAL TOOL IN ALL EFFECTS, A COMPLETE FLOATING SHOCK ABSORBER AT WORK
The innovative Hydraulic Top Link with integrated gas accumulator is complete with a damping device and is interchangeable with the standard models that you already have, therefore without any installation difficulties.
The product is already equipped with a high-quality original Waltersheid quick hitch or, on request, it is also available with a fork or eye attachment.
The installation requires no special components and no additional spaces are required
We remind you that this accessory brings the following ADVANTAGES:
+ Comfort: protects the operator from blows from jumping implements during transport
+ Efficiency: increases front axle grip
+ Intelligent: the implement follows the ground with the FLOATING movement which follows the ground with consequent reduction of consumption and better workings
+ Safety: improves the traction of the tractor while driving on the road by absorbing shocks
+ Productivity: Reduced travel times on the road and in the field
- Maintenance: important reduction in maintenance costs of the tractor and of the operating machines  due to less wear on the components
Hydraulic top link with shock absorber Antonioni mod. 3A 070 complete with quick release for tractors with power up to 150Hp
INTERNATIONAL PATENT PENDING
Hydraulic top link with shock absorber of 70mm bore complete with quick hitch
FEATURES Innovative Hydraulic Top Link with integrated gas accumulator, complete with damping device
With high quality Waltersheid quick hitch or available with fork attachment long and short version
Interchangeable with standard models Installation requires no special components and no additional clearances are required
Hydraulic top link with shock absorber Antonioni mod. 3A 070 complete with quick release for tractors with power from 150Hp to 200Hp
INTERNATIONAL PATENT PENDING
Hydraulic top link with shock absorber of 70mm bore complete with quick hitch
FEATURES Innovative Hydraulic Top Link with integrated gas accumulator, complete with damping device
With high quality Waltersheid quick hitch or available with fork attachment long and short version
Interchangeable with standard models Installation requires no special components and no additional clearances are required
SPECIFICATIONS:
Biga 'Pick-up versions and performance with the vehicle in perfect working on flat surface.
type 13 max 5 Km / h + / - 10% P / T 800 kg. on the P / T 100 Kg on slope 15%
Type 19 max 6,5 Km / h + / - 10% P / T 600 kg.
Type 28 up to 8 Km / h + / - 10% P / T 400 kg.
Type 34 up to 11 Km / h + / - 10% P / T 200 kg.
The maximum range is considered with the load evenly distributed on the plane and the center of gravity of the goods must not exceed the height of mm. 350.
Dimensions:
Total Length mm 1540 Width mm. 740 Height mm. 1130
Floor Length mm 940 Width mm. Ground Clearance 740 mm. 310
Weights:
Total including batteries and banks kg. 176th
September 3 banks kg. Batteries kg. 36 each. x 2
Motor:
permanent magnet motor RR 10/1 800 W - rpm from 330 to 24 V.
N. 2 batteries 12V 140 A sealed gel - connected in series, without maintenance.
External charger 24 v - 12 amp - electronic microprocessor - 220 v.
transmission:
Differential, max. 2 Kgm torque - 2 Shaft with graft rejection in 6 slot.
chain drive with front and rear sprocket.
Brakes:
Front drum, drive with your right hand.
Rear disk drive with his left hand.
brake, drive on left lever.
increased by releasing the brake (engine brake) enhanced in the calibration of the parameters of the controller.
Covers: 3.00-4 rubber tires
Frame:
Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 9007.
lighting and signaling devices :
Headlight main and tail lights - reverse buzzer, horn.
phonometric values: values ??LpAm max = 77.6 - 85.6 LWA - Attendant Leq dB (A) 77.6
Vibration value: vmax (i) = 0.47 m / s2 (maximum value for operator sitting in the driver's seat).
Spare parts and tools for the maintenance and repair:
Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.
.jpg?format=webp)
.jpg?format=webp)
