Find Verified Industrial Sugar Suppliers, Manufacturers and Wholesalers

AUTOMATIC HEAD-MAKING MACHINE FOR ROUND PAINTBRUSH HEADS
- High quality brushes - superior production - only one operator -manufactures round paintbrush heads - from n. 8 to n. 22.
- Model M.A.P. 10/TT, is an automatic head-making machine for production of paintbrush heads with automatic insertion of 1 or 2 wedges.
- It is designed to work both flat or round wedges on request.
- Particularly suitable for working with all types of bristle.

Processing phases:
-insertion of ferrule
-feeding of bristle
-insertion of bristle in ferrules
-insertion of wedge
-alignment of bristle by vibration
-setting of bristle for desired height
-trimming or burning (optional)
-transfer of finished heads.

Electronic control with PLC
Constructive system and the materials used, have demonstrated endurance, efficiency and simplicity in maintenance
Operators: 1
Production: 800 / 1200 Pcs/h
Material: All types of bristle
Power Supply Voltage: 230/400 VAC 50/60 Hz
Setup Time: 15-20 minutes
Air Consumption: 400 l/min at 6 bar
LxWxH: 3000x1800x2400 mm
Weight: 700 kg

Electric Actuated Gate valve Manufacturer in Germany
Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve.
The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position.
Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications.
Advantages of Electric Actuated Gate Valve:
It is suitable for both above ground and underground installation.
The closing feature of this valve is exceptionally good.
These valves can be used in a circuit both ways.
Pressure loss is minimum
Industries of electric actuated gate valve:
Petrochemical
Refineries
Process plants
Oil and gas
Description:
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 2500
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
Electric actuator details-
Torque 3 9 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4
Mounting Base-ISO5211
Temperature--20 C - +80 C

Electric Actuated Gate valve Manufacturer in Germany
Are you looking for the best Electric Actuated Gate Valve Manufacturer? Valvesonly Europe is one of the leading Electric Actuated Gate Valve Manufacturer in Germany. An electric actuated gate valve is a type of gate valve that is powered by an electric motor to control the flow of fluid. The electric motor is connected to the valve stem, which controls the movement of the gate or wedge in the valve.
The electric actuator can be controlled by a control signal to open or close the valve as needed. The valve position can be monitored by a feedback device, such as a limit switch or positioner, which sends a signal to the control system indicating the valve's current position.
Valvesonly Europe is the leading Electric Actuated Gate Valve Manufacturer in Germany and are available in a variety of materials, including cast iron, stainless steel, and alloy steels, and can be used in a wide range of pressure and temperature applications.
Advantages of Electric Actuated Gate Valve:
It is suitable for both above ground and underground installation.
The closing feature of this valve is exceptionally good.
These valves can be used in a circuit both ways.
Pressure loss is minimum
Industries of electric actuated gate valve:
Petrochemical
Refineries
Process plants
Oil and gas
Description:
Body Material: Cast Iron, Ductile Iron, 316L, SS304, SS316, CF8M, SS316L, SS904L,WCB, WCC, WC9, WC6
Size: DN15 to DN700
Pressure: PN10 to PN450,150 to 2500
End: Flanged, Socket weld, Butt weld.
Operation: Electric actuated.
Electric actuator details-
Torque 3 9 nm
Operating pressure- 8 Bar
Port Connection-NPT1.4

Steam pressure reducing valve manufacturer in Germany
Do you want to know who makes the greatest Steam Pressure Reducing Valve Manufacturer in Germany? Germany's top producer of steam pressure lowering valves is Valvesonly Europe. A steam pressure reducing valve is a type of flow control valve that is designed to reduce the pressure of steam in a system to a desired level. Steam pressure reducing valves are typically installed in steam distribution systems, such as boilers and steam generators, to maintain a safe and efficient operating pressure for the system.
The valve works by controlling the flow of steam through the valve body. The valve body typically has a tapered or globe shape, which allows for precise control of the flow rate. Inside the valve body, there is a valve disc, which is connected to the valve stem. The valve disc moves up or down, depending on the pressure of the steam entering the valve.
When the steam pressure exceeds the desired set point, the valve disc closes, reducing the flow of steam and lowering the pressure. When the steam pressure drops below the set point, the valve disc opens, allowing more steam to flow through the valve and increasing the pressure.
Valvesonly is the dominant Steam Pressure Reducing Valve Manufacturer in Germany which are well known for their commitments to quality. All the products are tested by our highly professional team before delivery to clients.

A typical Steam Pressure Reducing Valve consists of:
ï?¬ â?¢Valve Body
ï?¬ â?¢Valve Disc
ï?¬ â?¢Valve Stem
ï?¬ â?¢Regulator (adjust the desired set point)
ï?¬ â?¢Pressure gauge (monitors the pressure)

Advantages of steam pressure reducing valve:
â?¢ It is ideal for large loads
â?¢ Less noise
â?¢ Waterproof.
â?¢ Suitable for high-pressure applications.
Industries of steam pressure reducing valve:
ï?¬ ï?¬Power generation
ï?¬ ï?¬Oil and Gas
ï?¬ ï?¬Marine and offshore
ï?¬ ï?¬Pulp and paper
ï?¬ ï?¬Textile
Description:
Body Materials: CF8, CF8M,Cast Iron, Wcb, Wcc, wc6,wc9, Ductile Iron, SS304, SS316,CF8M, SS316L, SS904L, Duplex Steel (F51,F53,5A,4A,6A), Super Duplex steel[55]
Class:150 to 2500, PN10-PN450
Size: 1/2 to 24
End Connection: Socket weld butt weld, flanged, threaded

Triple Offset Butterfly Valve manufacturer in
the topmost Triple Offset Butterfly Valve manufacturer in We provide high-quality and reliable valves at competitive prices. The triple offset butterfly valve is also known as a Triple eccentric butterfly valve. Because of its metal sealing, the thermal shocks and pressure peaks are getting reduced.
This design allows for low-torque operation. The composite stainless steel sealing on our triple offset butterfly valve ensures that there is no leakage. This makes the valve more resistant to high temperature, high pressure, and corrosion. Whenever the valve body is opened or closed, there is no friction happens between the disc and the valve body throughout the rotation.

What is a Butterfly Valve

A butterfly valve is a member of the family of quarter-turn, bi-directional, rotary motion valves used to stop, control, or start flow.

Quarter valves are the kind of valves that only require a quarter turn of the disc to fully open or fully close the flow. In order to transition from the completely open to the fully closed position, quarter turn valves simply need to be rotated 90 degrees. They are also known as fast-acting valves for this reason.

The shape and movement of the plug give the butterfly valve its name.
The plug has a rod running through it and is formed like a disc, giving it the appearance of wings. The disc rotates by a quarter when the rod is turned, falling perpendicular to the flow and stopping it. The disc is rotated back to its original position, which is away from the flow in order to restart the flow. To regulate the flow, the valve can also be opened gradually.
Description:
Class: 150 to 600
Material: Cast iron, Ductile iron, Stainless steel (SS304, SS316, F304, F316, CF8, CF8M, SS316L, SS409L), Carbon steel, Duplex steel.
End Connection: Wafer, Lug, Flanged
Size:
Pressure: PN6 to PN300
Operation: Gear Operated, Electric Actuated, Pneumatic Actuated

second hand Sbaragli dryer for loose fibre. N 3 chambers of mm 3300 length each. ww mm2000. yoc 2007. Overheated system. fully checked and heating system can be changed accordingly to customer requirements. Dryer complete of hopper feeder yoc 2007.

second hand Sbaragli dryer for loose fibre. N 3 chambers of mm 3300 length each. ww mm2000. yoc 2007. Overheated system. fully checked and heating system can be changed accordingly to customer requirements. Dryer complete of hopper feeder yoc 2007.

Pneumatic actuated ball valve manufacturer


Europe is a leading manufacturer of pneumatically operated ball valves in . For its operation, a pneumatic ball valve is paired with a pneumatic actuator. It's a tough valve that shuts off perfectly. It can also be employed for fine media flow in throttling applications. Europe offers high quality Pneumatic Ball Valves with a long service life. This type of valve ensures a secure shutdown.

Features of Pneumatic Actuated Ball Valve
It has both sides seals coated with internal balls and can deliver tight cut-off even after years of operation, according to Pneumatic Actuated Ball Valve features.
The ability to open and close quickly.
The actuator is small.

Are you seeking for a reputable manufacturer of pneumatic ball valves
With our manufacturing facility and warehouse in , we are one of the leading pneumatic ball valve manufacturers in . We are primarily concerned with achieving complete customer loyalty through the provision of dependable, high quality industrial valves. We produce valves that are cost effective without sacrificing quality.

Available materials CF8M, CF8, SS316, CF8M, WCB, WC6, WCC, LCB, LCC, SS304, SS316
Class 150 to 2500
Nominal Pressure PN6 to PN450
Size 12 to 48
Ends Flanged, Buttweld, Socket weld, Threaded.
Operation Pneumatic Actuated


For more details visit here: https://www.valvesonlyeurope.com/product-category/pneumatic-actuated-ball-valve/