Find Verified Electronic Testers Suppliers, Manufacturers and Wholesalers

Electronic cards for looms news or used.

Weft feeder for textile looms with all its mechanic and electronic components.

Weft feeder for textile looms with all mechanic and electronic spare parts.

Weft feeders for textile looms with all mechanic and electronic components and spare parts.

XT-10 functions with a 360° dispensing valve

A Multi-Purpose Lubricant with 10 powerful functions unlocking, protective, lubricating, penetrating, degreasing, high temperature resistant, anti- corrosion, waterproofing, anti-scuff, great solvent power (it dissolves rust). Created with active ingredients of the highest quality, it has an ultra lubricant power, ultra penetrating degreaser and is perfectly suited for the workshop, at home, in the garden, in the nautical industry, industrial, sporting goods or anywhere there is a mechanism that requires maintenance.

CERTIFIED :
Test No 14LA05748
E.P. Properties and anti-seize with four ball tester

Weft feeder for textile looms with all mechanic and electronic components available new and used.

We can supply scrap ABS PS derived fron electrict and electronic components TV MONITOR pressed in bales.

Only a sample of spare parts for weft feeders for looms, available for all iro-roj-savitec items, news or used.

We can supply regrind scrap ABS PS PP PC derived from electric and electronic components TV MONITOR in big bags .

There are many variations passages of available but theses in majority have suffered alteration in some form injecte humou or randomised words which don't looks even slightly believable embarrassing hidden in the middle.

Noiseless and ecological electric tractor.
Moderate purchase price

In these facilities, Bigà can be used for:
- individual transport of personnel
- control, inspection and security service
- maintenance, cleaning and transport of small packages
- towing with trucks up to 800 kg



GENERAL FEATURES:
- Turning radius: cm. 120
- Length. 140
- Width cm. 85
- Height. 110-130
- Minimum height cm. 5.4
- Weight: Kg 120/140 depending on the type of batteries installed
- fiberglass shell fully recyclable
- tube frame with thick serial number for traceability
- Handlebar adjustable in height
- cover with 3.00-4 tires room air (can puncture tires)
- Headlight and taillight - Safety button "ride-on" - Reverse insertable lever - horn, rear view mirror and the battery charge indicator - Electric motor 24 volt permanent magnet 800 watt - 24 volt 800 watt motor RR 1/10 - Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking - N. Two 12-volt batteries - Traction tubular plate - 102/157 Ah - Built-in charger or external high frequency and automatic control of the state of charge. - Drive chain high strength pinion - Differential aluminum satellites treated steel - Shaft with grafts and 6 hp - Voltage reducer 24 to 12 volts for lighting system - Brake system: front disc brake, rear differential, brake lever on the left and enhanced engine braking from the calibration of the electronic control. - Blue color.

Noiseless and ecological electric vehicole/tractor.

16 Km/h.

Direct use: you get on, drive and stop (movement dynamics). For all employees who move in a range greater than 100 mt. For quick repair service and transport of small-sized components. Average time saving of about 40 to 60 minutes per day.

TECHNICAL FEATURES:
- Turning radius: cm. 120
- Length. 140
- Width cm. 85
- Height. 110-130
- Minimum height from ground cm. 5.4
- Weight: Kg 120/140 depending on the type of batteries installed.
- fiberglass shell fully recyclable
- tube frame with thick serial number for traceability
- Handlebar adjustable in height
- cover tires 3.00-4 with room air (can puncture tires)
- Headlight and taillight
- Safety button "ride-on"
- Reverse insertable lever
- horn, rear view mirror and the battery charge indicator
- Electric motor 24 volt permanent magnet 780 watt
- Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking
- N. Two 12-volt batteries - lightweight tubular plate traction - 105/125 Ah.
- Built-in charger and automatic battery status.
- Drive chain high strength pinion
- Differential aluminum satellites treated steel
- Shaft couplings with 6 quarries
- Voltage reducer 24 to 12 volt lighting system
- Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control.
- Colors: white, red, green , yellow, blue, black, orange (other colors on request).

Noiseless and ecological electric tractor.


10 Km/h.

-offers two different advantages: it allows to move very quickly and transport up to 300 kg of materials by using a truck designed by us. Speedy, handy in narrow spaces, it spins around with the truck within a 200 cm radius allowing quick access to other departments. Quick repair and maintenance of big- sized and heavy materials (the truck is 120x80 cm with a carrying capacity of 300 kg). Allows to avoid using big and expensive vehicles to move small volumes of goods.

TECHNICAL FEATURES:
- Turning radius: cm. 120
- Length. 140
- Width cm. 85
- Height. 110-130
- Minimum height from ground cm. 5.4
- Weight: Kg 123/143 depending on the type of batteries installed.
- fiberglass shell fully recyclable
- tube frame with thick serial number for traceability
- Handlebar adjustable in height
- cover tires 3.00-4 with room air (can puncture tires)

- Headlight and taillight
- Safety button "ride-on"
- Reverse insertable lever
- horn, rear view mirror and charge indicator battery
24 volt 800 watt electric motor RR 1/10
- 24 volt electric motor permanent magnet 780 watt
- Electronic high-frequency MOSFET technology controlled by a microprocessor to recover energy during braking
- N. 2 Batteries 12 volt - tensile tubular plate - 102/157 Ah.
- Built-in charger or external high frequency and automatic control of the state of charge.
- Traction Chain gear ratio 1/10, 125
- Differential aluminum satellites treated steel
- axle shafts with couplings 6 slot
- Voltage reducer 24 to 12 volt lighting system
- Brake system: front disc brake, rear differential, brake lever on the left and engine braking enhanced by the setting of the electronic control.
- Colours: white, red, green, yellow, blue, black, orange (other colors on request).

The company manufactures:

- Wires: a wide range of unipolar wires is used in products. Section goes from 0,09 mm2 to 50 mm2 and they are made of several materials like PVC, Teflon, AWG according to the UL-CSA, silicone with or without glass tubing.

- Probes: temperature probes, Reeds or Hall effect wired probes or any kind of required wrapper like threaded bulbs, perforated bulbs, steel, brass, plastic bulbs, die-cast bulbs. The Company can also work on wrappers designed for a dedicated mould.

- Power cables: the production also includes power cables with die-cast plugs/sockets of different types: Italy, Schuko, UK, IEC, Australia.

- Cables: wirings with multipolar shielded and shieldless cables, for applications like data transmission, power and dynamic uses; standard wirings like Fror, PVC, LIYY, Silicone, Neoprene or custom-made wirings, according to particular applications
.
- Panelboards, according to customer’s plan.

- Assemblings.

Stocklot composed of cables, audio accessories, video, mobile telephony, tablets, IT
Total pieces 290,000 (all in blister)
10 containers of 40 feet
Packing list available on request
Price FOB

Electric cart

SPECIFICATIONS:
Dimensions:
Total Length mm 930 Width mm. 650 Height mm. 1070
Floor Length mm 870 Width mm. Ground Clearance 620 mm. 330

Weights:
Total kg including batteries. 77.90
Batteries kg. 13 each. x 2

Motor:
Permanent magnet motor with electric 200 W - rpm 120 - 24 V electro 24VDC 2Nm.

Voltage and batteries:
no Two 12V batteries 32 A C5 sealed gel - series connection, without maintenance.
External charger 24 v - 8 ampere - Electronic microprocessor - Power supply 220 v.


Brakes:
Electric brake block engine, listing in the event of power failure.
braking on deceleration (engine braking) enhanced in the calibration of the parameters of the controller.

Speed and Capacity (performance with the vehicle in perfect working order on flat surface:
Max 5 Km / h + / - 10%
Max 250 kg. terms and 100kg. slope of 15%.
Maximum flow rate is considered with the load distributed uniformly on the floor.

Tires:
2 wheels rubber tires mounted on rims with pneumatic 3.00-4 6-ply roofing.
2 wheels 200x50 diameter core polypropylene gray synthetic rubber ring mounted on swivel mounts.

Frame:
Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 6018

Spare parts and tools for the maintenance and repair:
Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.

Sound level values: less than 70 dB (A)

Electric handling kit
1.500/2.000 kg autonomy 5 hours in continuous
Functions Stop and Go forward / backward industrial radio remote control
flashing and buzzer always on at cart on
Speed 4 km / h

SPECIFICATIONS:
Dimensions: Shopping cart
Weight: Your cart + kg. 120
motor 24 V - 600 W - 85 rpm with brake assist, with manual release
N. 2 Batteries GEL - 12 V Capacity: 140 Ah C20 - 105 Ah C5
Charger HF 24V - 12 A - 220 V
Electronic control technology MOSFET 24 W - 140A
ignition key
battery charge indicator
Emergency button mushroom ex-battery
flashing E24 xenon
Horn Operating
N. 2 6-ply tires 300-4 with inner tubes and aluminum wheels

on request: A) lever 2 speed '4/6 km / h B) electric motor brake release lever TECHNICAL RADIO CE: with battery charger Protection transmitter / receiver: IP67 Operating temperature -20 / + 55 ° C Range 150 m. Operating Frequency ISM band: 868.0125 to 869.9878 MHz in Stop category 1 Technology LBT Range at 20 ° C: about 50 hours. transmitting apparatus: AT MYTH - MINI receiving apparatus: AR MYTH - MINI R & TTE Directive 99/05 / EC EMC Directive 2004/108/EC Low Voltage Directive 2006/95/EC Applicable standards EN 300 220 EN 301489-3 EN 61000-6 EN 60529

Founded in 1968, it is a leading Italian company in the manufacturing of mattresses, bed frames, pillows, and bed accessories.

The company works on 3 plants covering an area of 60,000 m2, where they process all the functions
of production, storage, logistics and administration, with a total workforce of 150 units. From order entry and its electronic placement into production, the item is manufactured within 48 working hours, regardless of the type and size of product and whether it is standard or tailor-made.

Products:
Mattresses
- spring mattresses featuring Bonnell technology,
- spring mattresses featuring LFK technology,
- pocket springs mattresses,
- latex mattresses,
- polyurethane foam mattresses (3 layers), Myform-Memory foam technology (95kg/m3) conceived and developed in collaboration with the University of Bologna.
Bed frames
- fixed, manual and electric
- made of wood or iron
Pillows
- polyurethane foam
- latex
- fibre

For over 5 years, the Company has been cooperating with University Research, which has conducted 3 studies on sleep on a statistically significant sample. It was demonstrated that the branded products lead to better sleep performances than the products previously used by the sample.

Certifications and Awards
- OEKO-TEX STANDARD 100 (CLASS 1) CERTIFICATION
- UNI EN ISO 9001:2000 (VISION 2000),
- CLASS 1 IM HOMOLOGATION for fire-resistant products,
- IMO CERTIFICATION for naval supplies.
- The mattresses of the polyurethane foam line are classified as Medical Devices under the Directive 93/42/EEC.
- For 5 consecutive years (2003 – 2004 – 2005 – 2006 – 2007), the Company has been certified as one of Europe’s 500 fastest growing companies.

References
In 2005 the Company won the supply of mattresses for the entire Olympic village, during the 2006 Olympic Winter Games that took place in Turin. Lately the Company signed supply contracts with the major shipping companies for cruise ships and with renowned hotel chains.

The Company would like to get in contact with agents or representatives from Germany, Austria and Switzerland, as well as importers and wholesalers from India and Indonesia.

Electric small tower tractor.

SPECIFICATIONS:
Biga 'Pick-up versions and performance with the vehicle in perfect working on flat surface.

type 13 max 5 Km / h + / - 10% P / T 800 kg. on the P / T 100 Kg on slope 15%
Type 19 max 6,5 Km / h + / - 10% P / T 600 kg.
Type 28 up to 8 Km / h + / - 10% P / T 400 kg.
Type 34 up to 11 Km / h + / - 10% P / T 200 kg.
The maximum range is considered with the load evenly distributed on the plane and the center of gravity of the goods must not exceed the height of mm. 350.

Dimensions:
Total Length mm 1540 Width mm. 740 Height mm. 1130
Floor Length mm 940 Width mm. Ground Clearance 740 mm. 310
Weights:
Total including batteries and banks kg. 176th
September 3 banks kg. Batteries kg. 36 each. x 2
Motor:
permanent magnet motor RR 10/1 800 W - rpm from 330 to 24 V.
N. 2 batteries 12V 140 A sealed gel - connected in series, without maintenance.
External charger 24 v - 12 amp - electronic microprocessor - 220 v.
transmission:
Differential, max. 2 Kgm torque - 2 Shaft with graft rejection in 6 slot.
chain drive with front and rear sprocket.
Brakes:
Front drum, drive with your right hand.
Rear disk drive with his left hand.
brake, drive on left lever.
increased by releasing the brake (engine brake) enhanced in the calibration of the parameters of the controller.
Covers: 3.00-4 rubber tires
Frame:
Tubular steel and Fe 37 powder-coated polyester for outdoor Ral 9007.
lighting and signaling devices :
Headlight main and tail lights - reverse buzzer, horn.
phonometric values: values ??LpAm max = 77.6 - 85.6 LWA - Attendant Leq dB (A) 77.6
Vibration value: vmax (i) = 0.47 m / s2 (maximum value for operator sitting in the driver's seat).

Spare parts and tools for the maintenance and repair:
Original spare parts and tools for maintenance and repair are provided directly to order from Italy Bigà spa.

A series EAGLE is composed of two models for electrosurgery which can all be connected to an independent Argon gas module and max. powers of 400 W and 280 W; there is also one model for electrosurgery which built in Argon gas and max. power of 400 W. The units have got 17 currents: 10 for the monopolar usage and 7 for the bipolar usage. Three for the monopolar cut, Three for the monopolar cut, Four for the monopolar coagulation, Two for the bipolar cut, Two for the bipolar coagulation, Two for the bipolar coagulation, One for the coagulation / sealing of big vessels. All the output currents are completely self controlled through a micro-processor with three different systems: - ADC System - APC System - Starting impulse control, which electronically checks the starting pulse of the cut currents. The EAGLE models are equipped with a circuit that can verify the connection/contact of the neutral electrodes ônon Splitö type with a single section and ôSplitö type with a double section with interrupts delivery of the power and luminous acoustic alarm signal. The units can be used with one double pedal footswitch, which allows the activation of the monopolar or bipolar functions, and with a second double pedal foot-switch, which is indicated for the independent activation of the bipolar functions only. The all models allow memorizing and then selecting through a simple button 100 complete functioning programs and are equipped with: two monopolar outputs, which can be used at the same time by two different operators through the Twin activation device; two bipolar outputs. All models are equipped with an auto-check system at double microprocessor: - Main Auto-Check, main auto-diagnosis procedure at the switching-on. - Standard Auto-Check, continuous check of all the functioning parameters during the usage. - Immediate interruption of the functioning with contemporary alarm signal for the operators through specific Error Codes HF Leakage Control, check of the high frequency leakage currents to earth. Auto-Check Argon section. Automatic output of the right modulated and pulsed spray coagulation when the Argon gas coagulation is activated independently from the type of coagulation selected for the simple electro-surgery, and selfcompensation of the gas flow according to the diameter of the electrodes, with a perfect control of the penetration depth. The units can be equipped with automatic activation aspirators that guarantee the efficacious and silent elimination of smokes or electro-surgical aerosol.