Find Verified Car Alarm Systems Suppliers, Manufacturers and Wholesalers

Car seat scraps all grain printed
Car cut : renault-citroen-pegeout all printed
Colours : 90% black
10% grey and brown
Size; two hands up
Thickness : 1,0-1,1.

All grain; embossed(2 type emboss) small emboss
Colours: 95% black – 5% brown, grey.

All grain; 100% smooth (without emboss)
Colours: 70% black – 30% brown, grey, beige
These colours minimum 300mq each colour.

We can supply post-industrial EPDM car seals.

Car parts are plastic scraps coming from production of air conditioning and internal parts of cars.

They are all post production/industrial scraps.

A series EAGLE is composed of two models for electrosurgery which can all be connected to an independent Argon gas module and max. powers of 400 W and 280 W; there is also one model for electrosurgery which built in Argon gas and max. power of 400 W. The units have got 17 currents: 10 for the monopolar usage and 7 for the bipolar usage. Three for the monopolar cut, Three for the monopolar cut, Four for the monopolar coagulation, Two for the bipolar cut, Two for the bipolar coagulation, Two for the bipolar coagulation, One for the coagulation / sealing of big vessels. All the output currents are completely self controlled through a micro-processor with three different systems: - ADC System - APC System - Starting impulse control, which electronically checks the starting pulse of the cut currents. The EAGLE models are equipped with a circuit that can verify the connection/contact of the neutral electrodes ônon Splitö type with a single section and ôSplitö type with a double section with interrupts delivery of the power and luminous acoustic alarm signal. The units can be used with one double pedal footswitch, which allows the activation of the monopolar or bipolar functions, and with a second double pedal foot-switch, which is indicated for the independent activation of the bipolar functions only. The all models allow memorizing and then selecting through a simple button 100 complete functioning programs and are equipped with: two monopolar outputs, which can be used at the same time by two different operators through the Twin activation device; two bipolar outputs. All models are equipped with an auto-check system at double microprocessor: - Main Auto-Check, main auto-diagnosis procedure at the switching-on. - Standard Auto-Check, continuous check of all the functioning parameters during the usage. - Immediate interruption of the functioning with contemporary alarm signal for the operators through specific Error Codes HF Leakage Control, check of the high frequency leakage currents to earth. Auto-Check Argon section. Automatic output of the right modulated and pulsed spray coagulation when the Argon gas coagulation is activated independently from the type of coagulation selected for the simple electro-surgery, and selfcompensation of the gas flow according to the diameter of the electrodes, with a perfect control of the penetration depth. The units can be equipped with automatic activation aspirators that guarantee the efficacious and silent elimination of smokes or electro-surgical aerosol.

The smoke evacuators CS series are innovative suction units designed to evacuate and filter the smoke produced during the electro-surgical procedures. Eliminate the bad smells or the bacteriological risks and solving the problem of the visual field during the laparoscopic procedures. The CS200 model is equipped with an electric suction group at high flow and medium noise with TURBO function to high suction. Suitable for the out-patient treatment, connectable to gynecological speculum, to suction systems on the electrodes-handle, and to the fixed tubing on the operation point. The most complete model CS900LC is equipped with an electric suction group at high flow and low noise, a special circuit for the connection to a centralized vacuum system and another circuit for the controlled output of the CO2 which is used in the laparoscopic procedures with the pneumoperitoneum. Suitable for the usage in the operating theatre, thanks to the low level of noise produced and high performance. The CS200LC model is the same as the CS900LC model, but it is equipped with a less powerful electric suction group. All the models can be used as a shelf for the electrosurgical units. Available specific trolleys for the out-patient treatment and the operating room.

Starlux Alpha/Bheta series.

COLD LIGHT
Cold, Halogen light source with advanced filter to absorb over 95% of the heat generating from light source.

BACK-UP BULB SYSTEM
Automatic Activation of the second bulb in case of the burning of the primary lamp with visual indicator of burnt bulb, to ensure the continuity of the surgical procedure. The replacement of the bulbs no requires any tool.

AERODYNAMIC LIGHT-HEAD
Aerodynamic sealed, light head with smooth surface to grant the max hygieny in operating room and over the surgical site.

SHADOW REDUCTION AND DEEP CAVITY ILLUMINATION
The multifacets reflector with more than 1000 facets, reflect and concentrate the light beam directly from each facet to the focused light pattern without dark spots, rings and irregularities, granted a light beam without shadow.

The portable digital Videodermoscopy system VIDEODERM P is a useful and complete device that joins together quality and comfort, reliability and simplicity of use. It is provided with a dermatological digital camera of high quality and extremely easy to handle: VIDEODERM P is the very first portable system with halogen lighting for clear and real images. Interchangeable polarized and immersion optics for magnifications: form 10x to 300x.The notebook is in the lead with its useful components like CD/RW and DVD/R and backup HD. Moreover it is provided with the software Videoderm for the acquisition and elaboration of images, management of visits and patients, personal data and several other functions for a complete analysis of the lesions. The digital Videodermoscopy system VIDEODERM P is unique and inimitable thanks to the comfort of a simple and little suitcase, the reliability of the camera and the intuitive and multi-functional software. VIDEODERM P is a versatile device for an employment in Videodermoscopy, Videocapillaroscopy and clinical documentation.

The digital Videodermoscopy system VIDEODERM F allows you to acquire the images with different magnifications by using a unique camera with a very high quality. Lighting by halogen source for clear and real images. The camera, which has a SONY CCD, can make images for Videodermoscopy (magnifications x30 and x50), for videocapillaroscopy (magnification x300) and clinical images for a compete and correct photographic record. It is provided with the software Videoderm for the acquisition and elaboration of images, management of visits and patients, personal data and several other functions for a complete analysis of the lesions. Indeed VIDEODERM F takes full advantage of the technologyÆs best potentialities by using computers of very high quality with CD/R and DVD/R, Backup HD, monitor 17' LCD, printer with photographic quality and a professional digitizer of images. Moreover the system is provided of dedicate trolley.

It's a professional enamel spray ideal for for the paiting of rims wheels of motorcycles and cars. Thanks to its textured / embossed fi nish, this special paint is specifi c for repainting or renewing bumpers, side panels and spoilers.

Sku:V400FAS

Furniture scraps unselected from sofa factory
Only 1 factory
90% grain - 10% split
Thickness : mm. 0,9-1,1
Size : 10% one palm up
50% one hand up
40% two hands up.

Colours : 50 % beige
30 % white
20% brown and black.

Furniture scraps Anelina big size selected
From sofa factory
Origin material : germany
Only one factory
Size : three hands up
Thickness : 50% mm. 0,9-1,2
50% mm. 1,3-1,5.

Colours : 70% dark (brown and black)
30% light (mainly white).

All grain (full grain and correct grain)
Size : 40/50 sf. Average 42/45 sf.
Thickness : 50% mm. 0,9-1,1
50% mm. 1,3-1,5.

Colours : 60% dark family - 40% light family.

Quantity minimum each colour : 3000 sf.

We Produce Industrial Machines For Separating:

- 01-01 Copper Wires
- 01-02 Alum Scraps
- 01-03 Ac Sr (cables)
- 01-04 Electric Motors
- 01-05 Radiators Heat Exchange
- 01-06 Alum/ Glass Fixtures
- 01-07 R4weee/ Elect
- 01-09 R1weee Fridge
- 01-10 Car Dismission & Compacting

The Company produces steel door and windows frames:
- systems in steel;
- innovative openings;
- Glass façades and coverings

The products are designed and produced in order to guarantee the best technical, functional and aesthetical performances for up-to-date windows and doors.

The Company offers the most innovative typologies of closures: the high safety sash/bottom system, the lifting and sliding door - also in very big sizes, - a sophisticated system of sliding glass walls, the 180° window – that does not intrude on indoor space and finally the advanced flood professional window .
Ideal for meeting the most complex requirements, the Company’s systems are used both for modern architecture and restoration works, excellently representing the concept of high quality windows and doors.

Main characteristics of steel frames are:
- low maintenance needs;
- low risk of burglary;
- aesthetic;
- thermal and acoustic insulation;
- energy saving.

Characteristics OF BM-01

Production Speed up to 250 Bags/min ( variable on sizes )
Size changeover simple and rapid in some case totally automatic
Technology Gearless in all 20 shafts of work
Final Cut-off with cut of scissors
Automatic conveyor for single packs of bags on the top
(number of pieces per pack can be selected)
Reel dimension:
Max Width 1250 mm
Max Diameter 1300 mm
Tension Controller with brake through load cells .
Automatic Control of the alignment of paper
Supervisor display for size change, production control and diagnostics.
Remote Control for Assistance and Technical support on-line.
Transversal vinyl glue applicator with automatic loading.
Hot-melt Glue Applicator Group with proportional variation from 18 kg/hour.
High pressure power source of vinyl glue with electronic regulation.


Sizes Of Realizable Bags:
All Heights from 10 to 50 cm
All Bottom Widths from 5 to 20cm (to 40 cm optional)
All Lengths from 21 to 100 cm
Substance of used paper from 75 gr to 125 gr.


Dimensions Of Handles:
The twisted paper cord handles that can be produced:
Fixed step from 9,52 cm width (variable step is optional)
Handles Height from 8 to 15 cm variable automatically
Diameter of the used twisted paper cord from 4 to 6 mm ( supplied by you )
Patch length 19,05 cm
Substance of patch paper from 75 to 90 gr.


Dimensions Of BM-01
Width max 3 mt.
Height max 2, 5 mt.
Length max 16 mt.
Encumbrance lateral area of handle making unit and glue unit 4 mt x 4 mt.

This primer is designed to be used as the strong base coat to ensure the perfect adhesion of all enamel spray on diffi cult surfaces such as metal alloys and metals. It protects metal surfaces from rust. Also suitable as a fi ller in bodywork car sector for small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. For overcoating are required at least 24/48 hours. After use, it's advisable to spray for 2/3 seconds with the can upside down to avoid the block of the nozzle.

Sku:V400PRIMER

This paint is designed to be used as the base coat for a fi nishing enamels. It provides a strong base to ensure the perfect adhesion of the enamel spray on difficult surfaces such as plastics and metals. It protects metal surfaces from rust. On cars it covers small imperfections and scratches. Clean carefully the surface before application and shake vigorously the can. It dries on touch in roughly 15 minutes and dries fully in roughly 22 hours. For overcoating are required at least 24/48 hours. After use, it;s advisable to spray for 2/3 seconds with the can upside down, to avoid the block of the nozzle.

Sku:V400PAST

A special paint that temporarily changes the color of a surface. It can be used on non-porous surfaces. It creates a decorative, protective removable film and has a soft touch effect. The original surface remains intact after the painted surface has been removed. It can be used on cars, sports gear, furnishings and more. To apply, vigorously shake the bottle for at least 1 minute, until the marbles inside the can move freely. Carefully clean the surface before application. Keep a distance of 20-30cm/8-1 2in. Apply 4 to 5 crossed layers (horizontal and vertical), each one every 10-15 minutes. It will be completely dry approximately 2 hours after application