ES EST is a non-nickel, non machinable cast iron electrode.
It is the most economical way to go for repairing various kinds of cast iron products providing that machinability of the weld deposit is not required and where weld shrinkage stress is not a concern.
EST melts at relatively low temperatures which permit the use of low welding currents.
This electrode may be used in any position, utilizing AC or DC (reverse polarity).
A nickel-cored electrode for welding normal grades of cast iron.
The weld metal is soft and easily machinable. Deposition is performed on cold or slightly preheated material.
The electrode is suitable for joining cast iron for the recti�cation of casting and the repair of broken parts.
ES Ni-Cl is specifically suited for repairing cracked or porous castings and to weld cast iron to itself or dissimilar metals such as low alloy and carbon steels.
ES 312-17 is a high-alloyed electrode which deposits a ferritic-austenitic duplex weld metal with approx. 40% ferrite.
It is resistant to stress corrosion and is highly insensitive to dilution.
Good scaling resistance up to 1150�°C. ES 312-17 is used for joining dissimilar steels, steels with reduced weldability and buffer layers prior to hardfacing.
Applications: rolls, forging dies, hot work tools, dies for plastics and so on.
ES 309L-17 is an over-alloyed, stainless electrode for welding stainless to mild steel and low-alloy steel, for surfacing mild steel and for welding the root runs in clad steel.
The electrode has excellent weldability in all positions except vertical down, on both AC and DC.
ES 309L-15 is a basic coated, stainless electrode for welding steels of the 24Cr13Ni type, for welding transition layers when surfacing mild steel with stainless, for joining dissimilar steels and welding root runs in the stainless side of clad steels.
1589 Electrodes Suppliers
Short on time? Let Electrodes sellers contact you.
ES 307-25 is a synthetic, high-recovery electrode of the 18Cr8Ni6Mn type for welding dissimilar steels, 13Mn steels, steels with reduced weld-ability and for cladding carbon steels.
ES 310-15 is a stainless-steel electrode for welding 25Cr20Ni steels.
It is also suitable for wel- ding armour steel, austenitic-manganese steel and for joining dissimilar steels.
ES 310-15 depo- sits a very crack-resistant weld metal.
ES 310-15 used for cladding side of stainless clad steels and dissimilar steels, hydrogenation and polymerization plant, gas turbine combustion chamber parts, annealing boxes, high temperature furnace parts up to 1200 C.
ES 308H-15 is a basic coated, stainless-steel electrode of the 308H type.
The electrode is designed for high-temperature applications in petrochemical and chemical process plants.
ES 308H-15 is widely used in petrochemical and chemical process plant, particularly for the fabrication of cyclones, transfer lines operating in the range 400-815C.
Rutile coated electrode for welding 19Cr10Ni type steels.
Also suitable for welding stabilised steels of similar composition, except when the full creep resistance of the base material is to be met.
The electrode is specially designed for wel- ding thin-walled pipes.
ES308L-16 characteristics make this electrode the smart choice for general structural welding, as well as for food, and pharmaceutical equipment applications.
ES 12018-M is recommended for use in fabrication low alloyed high tensile strength steels where weld of 120 ksi (830 MPa) minimum tensile strength are required.
ES 12018-M typically used to weld forging, casting plate and pressure vessels, automotive industrial and general fabrication, mobile equipment's railcars.
ES 10018-M used for welding high strength low alloy steels in the 100,000 psi tensile strength range.
It is ideal for conditions of high heat and humidity due to the moisture resistant coating which helps prevent hydrogen cracking and starting porosity.
ES 10018-M is an excellent choice for reinforcing steels and high tensile steels.
1589 Electrodes Suppliers
Short on time? Let Electrodes sellers contact you.
