Fines, under 6 mm, 100k per shipment, up to 200k/m supply, 30% upfront against full SGS & full doc, 70% loading, LC transferable/divisible/irrevocable, 2 m mt supply contract, 1800 mth loading port, Totoralillo Port, Chile. $76 TM + IVA
Pig iron is produced from the blast furnace. The purpose of a blast furnace is to chemically reduce and physically convert iron oxides into liquid iron called hot metal. The blast furnace is a huge, steel stack lined with refractory brick, where iron ore, coke and limestone are dumped into the top, and preheated air is blown into the bottom. The raw materials require 6 to 8 hours to descend to the bottom of the furnace where they become the final product of liquid slag and liquid iron. These liquid products are drained from the furnace at regular intervals. The hot air that was blown into the bottom of the furnace ascends to the top in 6 to 8 seconds after going through numerous chemical reactions. Once a blast furnace is started, it will continuously run for four to ten years with only short stops to perform planned maintenance.
Pig iron is an intermediate product and first product of Iron making reduced from Iron ore. Pig iron has a very high carbon content, typically 3.5-4.5%, along with Silica, Manganese, Sulphur, Phosphorus and other trace elements.
USES AND BENEFITS OF THE PRODUCT:
Pig Iron comprises three main types: BASIC PIG IRON which used mainly in electric arc steelmaking, FOUNDRY PIG IRON used in mainly in the manufacture of grey iron castings in cupola furnaces, and NODULAR PIG IRON (SG GRADE) used in the manufacture of ductile iron castings. Pig iron is used for steel making, foundries, alloy making, in automotive castings and other iron based castings.
LEVEL OF CUSTOMISATION:
We produce compositions within fairly narrow ranges of specifications with the objective of optimizing customer's costs due to non-addition of additives, standardization of process parameters and minimization of rejects. We are long-term suppliers to some of the global brands & OEMs from automobile industry and some of the most reputed steel mills and foundries.
Given below are the indicative specification of our pig iron grades which we supply to our valued customers primarily in India and also in Middle-East, Far-East, South East Asia:
1.
Commodity: Iron Ore Mexico 93USD CIF, Tanzania 62% 95USD CIF
2.
Grade: 62% or more and 57%-62%
3.
Delivery Terms: CIF
4.
Price: USD 95 per metric ton, plus 1 USD commission////
5.
Payment terms: MT103 cash transfer
6.
Quantity: 200,000 mt per month
Chemical analysis are attached with this letter.
We look forward to your confirmation and the opportunity to establish a mutually beneficial business relationship.
Sincerely,
For
The AS-013 angled field spec mounting bracket facilitates angled mounting of Apogee Instruments field spectroradiometers model SS-110 and SS-120 to a mast or pipe. The bracket is designed to orient the spec at varying angles to satisfy all applications.
The AL-130 Albedometer Bracket is designed to accommodate the SP-510 upward-looking thermopile pyranometer and the SP-610 downward-looking pyranometer to create an albedometer. It can also be used to mount other upward and downward facing sensors, such as our pyrgeometers. The AL-130 bracket is designed to be mounted to a mast or pipe with a 1.3 to 2.1 outer diameter and has an integrated bubble level to make leveling simple and accurate for proper sensor installation.
Iron Mineral
(FeT 62%+)
* Origin Peru, Philippines, Pakistan
* FOB / CIF
* Price: Platts -TBA
(The Price varies, by the Required Quantity and the Final Destination of the Product)
* AVAILABILITY
2.000.000 MT per month
* Contract 12 months
* PAYMENT TERMS
L / C
Against Cargo Documents.
Mineral samples, Photos, Videos or Life tests are not sent.
Direct Deal with the Seller.
We are direct suppliers of the Mine
FERROUS PRODUCTS OBTAINED BY DIRECT REDUCTION OF IRON ORE
(SPONGE IRON LUMPS)
SPECIFICATION:
FE TOTAL: : 90% Min
FE METAL: : 78% Min
METALLIZATION: : 85% Min
FeO: : 14% Max
SULPHUR: : 0.035% Max
PHOSPOROUS: : 0.05% Max
CARBON: : 0.12% Max
PHYSICAL SIZE: : 3 - 20 mm (100% Lumps).
Mean Particle Size (MPS) : 10-12mm
NON-MAGG: :1% Max
Fines: :1% Max (less than 3mm will be considered as fines)
Fe Content: Typically around 62% iron (Fe), but it can range from 60% to 63.5%.
Silica: Base content of 4.0%, with a maximum of 8.0%.
Alumina: Base content of 2.3%, with a maximum of 4.0%.
Phosphorus: Base content of 0.10%, with a maximum of 0.15%.
Sulfur: Base content of 0.02%, with a maximum of 0.06%.
Moisture: Base content of 8.0%, with a maximum of 10.0%
IRON ORE - HIGH GRADE 64.4 %
Characteristics:
-Law: 64% or more .
-Cost per ton: LME - 45% dollars (Fixed price, non-negotiable)
-FOB PRICE - C�¡rdenas, MEXICO
-MAXIMUM 70,000 tons in stock for Spot sale.
-Minimum 35% FOR sale contract.
-SHIPPMENT 60K TONS OR MORE .
-After the first SPOT sale, a minimum contract of 6 months.
I'm looking for a supplier of iron ore(Owner - mines). Product: Iron Ore (Fine type)
Specifications: 62-64%
Quantity: 3,000,000 tons per year. Purchase only - FOB ASWP. Target price 70\75$ per tons.
I'm looking for a supplier of iron ore. Product: Iron Ore (Fine type)
Specifications: 62-64%
Quantity: 2,000,000 tons per year
CIF TO FANG CHENG GANG PORT
Port of Fangcheng
1) CIF after CIQ
2) Payment by DLC + TT
3) Yearly order by monthly shipment in bulk. Target price for CIF (after CIQ) or C&F (after CIQ) is $115-125 /MT including commission
We are ready to supply Iron ore pellets. For more detail and lab report contact us on whtsapp. Payment term LC at sight,usance, SBLC, Direct Bank transfer. Buyer are welcome to send enquiry. We will be happy to send you customized quotes.
We can produce all kinds of casting steel parts, casting iron parts, astm, din standard material.Our factory already passed the certificate of iso 9001:2008, ts16949
Quantity for initial spot 12,500
Delivery Terms FOB
Price for initial spot $77.00 usd per Metric Ton
Time frame 30 to 40 days load spot cargo 1 Month for following cargoes
Jinggong Cast Iron Inspection Plates (also called Measuring Plates) have a particularly high density and surface accuracy that can be achieved by the use of a special alloy of cast iron. By the T-shaped reinforced ribbed pattern of the measuring plates, a very high stiffness is achieved; thereby bending and twisting can be limited to a minimum.
Jinggong Inspection Plates is also manufactured according to DIN 876.The design, dimensions, and T-slot can be made on request.
Jinggong Cast Iron T Slotted Angle Plate has exported to customers in the USA, Canada, Italy, Belgium, the Netherlands, etc. with the main technical information:
1. Cast iron, nodular iron or steel made angle plates, used as workholding fitted on floor type horizontal boring mills.
2. GG-25 grey cast iron made or other materials made angle plates, twice annealing heat-treatment to eliminate internal stress to maintain high precision free from distortion in the long time operations.
3. T-slots as per DIN650 specifications or other types of slots defined by customers can be machined on these angle plates.
4. Flatness accuracy as per DIN876 specifications or specified by customers.
5. Any sizes can be manufactured according to the user r drawing or detailed requirement.
6. The picture shows the angle plate 1500x800x800mm with material GG25 and T slots 22H12.
Measuring Plates (also called Inspection Plates) has a particularly high density and surface accuracy that canbe achieved by the use of a special alloy of cast iron. By the T-shaped reinforced ribbed pattern of the measuring plates, a very high stiffness is achieved;thereby bending and twisting can be limited to a minimum.
Inspection Plates isalso manufactured according to DIN 876.The design, dimensions, and T-slot canbe made on request.
The Cast Iron T/V/U-slot Surface Plates is mainly used as machining working surfaceof machine tools. Some holes and T-slots on the top surface of plates forfixing the work piece and clearing the scrap iron during the processing.
The rawmaterial is the high-strength cast iron GG20-GG30 (HT200-HT300). The size rangeis from 100mm*100mm to 3000mm*8000mm. Larger one can be made according to the drawing.
Angle plates witha box-shaped cast design are required for almost all boring and millingmachines to fix workpieces in a vertical position. The clamping surfaces of thestandard cast iron angle plates have been machined in accordance with DIN 876standard and provided with T-slots in accordance with DIN 650.
The bases of the castiron angle plates have clamping slots and drill-holes adjusted to the clampingoptions of the machine table.
The sizes anddimensions of the cast iron angle plates and the T-slots can be variedaccording to your requirements. The large and heavy angle plates can also besupplied in several sections. These can then be arranged in either a verticalor horizontal row to obtain the highest or widest possible clamping surface.
Jinggong Box Table is made from high-strength grey cast iron with cast clamp slots,which allows very high loading and is suitable for use on radial drills orsimilar machines.
Theclamping surfaces are exactly machined to DIN 876/111, II or I flatnessaccuracy. The working surfaces have T-slots to DIN 650 on request.
Type JGBT-A
Material: grey cast iron GG25 (HT-250);
Clamping and base surface machined to DIN876/II, DIN876/III;
The Cast Iron Lapping Plates is mainly used for manufacturing and repair themeasuring tools, grinding parts, production high precision machinery parts,processing the optical instruments.
Grindingplates with a homogeneous, compact structure, has no defects such as air holes, sandholes and any others to effect the usage. It has the advantages of easy on thesand and the sanddistributed wealth, the performance is strong when sand embedded in a solidcutting. It is also smooth, shiny, sky blue in surface, with good wearresistance.
The raw material is the high-strength castiron GG20-GG30 (HT200-300). The size range is from 100mm*100mm to3000mm*8000mm. Larger one can be made according to thedrawing.
Cast Iron T slotted Plates refers to the fire and water in industrial production andprocessing, fixing a workpiece (such as hull steel plate and steel parts) etc. Thematerial is a special cast iron steel alloy giving an exceptional strength anddurability.
The plates should shapedformation, accurate in sizes, has no defects inside, meet the requirements ofpyrotechnics production.
The work surfacecan be processed V-shaped, T-shaped, U-groove, dovetail slots, holes, long holesand so on, majority in circular aperture.
The Cast IronGrinding Surface Plates is mainly used for manufacturing and repair themeasuring tools, grinding parts, production high precision machinery parts,processing the optical instruments.
Grinding Plates with a homogeneous, compact structure, has no defects such as air holes, sandholes and any others to effect the usage. It has the advantages of easy on thesand and the sanddistributed wealth, the performance is strong when sand embedded in a solidcutting. It is also smooth, shiny, sky blue in surface, with good wearresistance.
The raw material is the high-strength castiron GG20-GG30 (HT200-300). The size range is from 100mm*100mm to3000mm*8000mm. Larger one can be made according to thedrawing.
The Cast Iron Clamping Plates are mainly used as machining working surface of machine tools. Some holes and T-slots on the top surface of plates for fixing the work piece and clearing the scrap iron during the processing.
The raw material is the high-strength cast iron GG20-GG30 (HT200-HT300). The size range is from 100mm*100mm to 3000mm*8000mm. Larger one can be made according to the drawing.
The work surface can be processed V-shaped, T-shaped, U-groove as your request.
Jinggong Cast Iron Hot-working Plates refer to the fire and water in industrial production and processing, fixing a workpiece (such as hull steel plate and steel parts) etc. The material is a special cast iron/steel alloy giving an exceptional strength and durability.
The plates should shaped formation, accurate in sizes, has no defects inside, meet the requirements of pyrotechnics production.
The work surface can be processed V-shaped, T-shaped, U-groove, dovetail slots, holes, long holes and so on, majority in circular aperture.
Jinggong Cast Iron Angle Plates with a box-shaped cast design are required for almost all boring and milling machines to fix workpieces in a vertical position. The clamping surfaces of the standard angle plates have been machined in accordance with DIN876 standard and provided with T-slots in accordance with DIN650.
The bases of the angle plates have clamping slots and drill-holes adjusted to the clamping options of the machine table.
Dimensions and T-slots size can be varied according to your requirements.
The Cast Iron T/V/U-slot Surface Plates is mainly used as machining working surfaceof machine tools. Some holes and T-slots on the top surface of plates forfixing the work piece and clearing the scrap iron during the processing.
The rawmaterial is the high-strength cast iron GG20-GG30 (HT200-HT300). The size rangeis from 100mm 100mm to 3000mm 8000mm. Larger one can be made according to thedrawing.
Jinggong Cast Iron Grinding Surface Plates are mainly used for manufacturing and repair the measuring tools, grinding parts, production high precision machinery parts, processing the optical instruments.
Grinding plates with a homogeneous, compact structure, has no defects such as air holes, sand holes and any others to effect the usage. It has the advantages of easy on the sand and the sand distributed wealth, the performance is strong when sand embedded in a solid cutting. It is also smooth, shiny, sky blue in surface, with good wear resistance.
The raw material is the high-strength cast iron GG20-GG30 (HT200-300). The size range is from 100mm 100mm to 3000mm 8000mm. Larger one can be made according to the drawing.
Features:
1.Simple in operating, fast on the sand, the amount of sand embedded in foot. It is still very easy to use the same sand on the back, after grinding, finish improved significantly.
2.Easy to get the required amount of blocks of a high finish and research together, piece mirror green (clear) lights.
3.Durable in use, cutting enough and long-lasting. Light guide after sand still has good machine ability, more smooth when pushing.
Specification
Item name Iron Pyrites
Size 200-325 mesh, 1-3 mm,3-8 mm,5-15mm,10-50mm
Color sliver grey
Aplication
1. The manufacturing of cast iron
2. The manufacturing of alloyed steels
3. Cutting steel manufacturing
4. Electric furnaces
5. Ceramics and paint pigment industry
6. The laboratory hydrogen sulphide gas
We are ready to supply Iron ore Mexico from two suppliers = direct mine owners
Mexico 62% and 64% CIF
South Africa 62% ^4%CIF
Chile CIF 62% direct mine owners
Lithium conc. white powder Bolivian Origin 99.5% 300MT available x12 month
