Silicone rubber sheet for acf bonding or cushion sheet. High thermal conductivity and high performance
From low price to high price according to requirements.
Normal thickness is 0.2mmt ~ 0.5mmt with 1450mm width
Cushion sheet and release sheet and acf bonding of olb, cof, fog for lcd/tsp
Depends on quantity, use hard paper carton or wooden packing
We are scrap yard in Poland which specialize in dismantling transformers. We would like interest you with our crgo,hrgo 0,27-0,35mm sheets from used transfomers.
We can provide wholesale silicone sheets from used big transfomers. Please let me know if you are interested then I will send you our stock.
Solid Silicone Sheet/ Silicone Rubber Sheet materials are inventoried by Seashore Manufacturing Limited from 0.5mm to 20mm thick and 30 to 70 durometer(hardness) Shore A.
Our Solid silicone sheeting continues to grow and is available in four standard colours white, translucent, red oxide and black.
The dimensions for silicon rubber sheet of our stock stardard is in the following:
1000mmx10mx from 1mm to 20mm
1200mmx10mx from 1mm to 20mm
1500mmx10mx from 1mm to 5mm
1800mmx10mx from 1mm to 5mm
2000mmx10mx from 1mm to 5mm
The specification of most standard silicone sheet we produce are as below:
Density:1.25 g/cm3
Handness:55 Shore A
Tensile strength:7.0 mpa
Elongation at Breakage:320%
Tension Set:8%
Tear Strength:20 KN/M
Heat Resistant: 200 C
Sizes Thinkness tolerance(+/-mm)
10mx1m or 1.2mx1mm 0.1
10mx1m or 1.2mx2 to 6mm 0.2
10mx1m or 1.2mx7 to 10mm 0.3
The above is silicone rubber sheet standard at Shore A Hardness 40,50,60. Other sizes, colours and hardnesses are available on request.
Beside standard ones,we supply FDA food grade silicone sheet,anti-static silicone sheet,anti-acid silicone sheet.
Special silicone sheet is use of wood/chipboard laminating,glass industrial,solar industrial.
Our Solid silicone rubber sheet is 200 degree centigrade temperature resistant as standard,but we also can do high temperature resistant up to 270 degree centigrade.
Sponge Silicone Rubber Sheet
100% closed cell Silicone Rubber material,double sides fabric impression or smooth finished.
Our sponge silicone sheeting is available in four standard colours white, red oxide,black.
The dimensions for sponge silicon rubber sheet of our stock stardard is in the following:
1000mmx1000mx from 3mm to 20mm
2000mmx1000mx from 3mm to 20mm
5000mmx1000mx from 3mm to 20mm
The above is sponge silicone sheet standard at Shore A Hardness 10,20,30. Other sizes, colours and hardnesses are available on request.
Our sponge silicone rubber sheet is 200 degree centigrade temperature resistant as standard.
Sponge silicon rubber sheet material is readily fabricated into gaskets and cushioning pads.
Product features:
1.Extremely high heat transfer, heat resistance and buffer.
2. Not to FPC, Glass and other damage.
3. The heat has super stable characteristics and the pressure on the product consistency.
4. High resilience and non-stick.
5. Antistatic, no powder on the surface.
Product specifications:
1, (thick:0.2mm--0.45mm) * (width:8mm-600mm) * (length:5-30m).
2, special specifications can be customized according to customer demand, and provide our customers customized various specifications of the iceberg.
3, the products are divided into common type SG (gray) and anti-static SGB (black).
4, the product is commonly used inside diameter 32mm, 38mm, can be customized according to customer demand.
Product application:
COG/FOG hot pressing bonding process for various display screens, ACF conductive film hot pressing, etc..
Product application:
application of various display COG\FOG hot state fixed process, or for transistor, IC and other electronic semiconductor products for insulation material, heat dissipation material use, or application in electric regulator and a temperature sensor, the advance on the bottom surface of the hot pressing head, the conduction temperature more uniform, the isolation is pressing products and head, and can prevent electrostatic isolation protection role.
Specification(sheets or rolls):
A. Sheets: 500*500*0.7-1mm
B. Sheets or rolls: 500*1.5mm above
C. Sheets or rolls: 1000*2mm above
D. Sheets or rolls: 914.4*2mm above
E. Sheets or rolls: 1200*2mm above.
F. Sheets or rolls: 1500*2mm to 10mm
Conforms to the national profession standard: hg/t2949
Honeywon»s silicone sponge is with high grade silicone rubber material and inimitable technique, with
Good character of high temperature resistant, aging resistant, ozone resistant, insulation property, fuel
Oil resistance, lubes resistance, no smell and wear well. High compressibility and low compression set
Over a wide temperature range, and good acoustic and thermal insulation properties. Apply to -50µ
~+200µ protect and heat insulation for long term continuous use and -70µ ~ +260µ for intermittent
Use on all kinds of machine.
Special size(mm)+minimum length:no limitation maximum length:no limitation, or in roll
Minimum width:no limitation maximum width:1200 minimum thickness:3.0 maximum
Thickness:30.0
Product color+ red¼grey¼natural, white¼black or any other required color
Application+ heat transfer print equipment, electronics and electrics, machine and sealcharacter+high temperature resistant, aging resistant, ozone resistant, insulation property, fuel oil
Resistance, lubes resistance, no smell and wear well, good acoustic and thermal insulation properties.
+ technical index¦
Style¦ open cell
Surface¦double fabric impression
Tear strength¦55kn/m
Press strength+30mpa
Elongation¦100%
Hardness¦8-50 shore a
Temperature range¦-50-220c continuously; -70µ ~ +260µ for intermittent use
Density¦0.55-0.9g/cm3
Flame resistance¦94v-0
Dielectric breakdown voltage¦>3kv
Dielectric constant¦5.5 khz
Tensile strength: 10-30psi
Volume resistance¦1.*1011 ohm-m
Thermal conductivity¦0.1 w/m-k
Thick tolerance: a0.05mm~0.1mm
Product Introduction
Silicone Scar Sheet is a ultra-thin, soft, flexible, self-adhesive dressing that is applied over scars.
It contains silicone. Silicone can help to improve the colour, height and texture of a scar.
Silicone can also relieve itching and discomfort caused by a scar.
Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags.
Ferro Silicon Ferro Silicon has a melting point of 1200�¯�¿�½?�?�°C to 1250�¯�¿�½?�?�°C with a boiling point of 2355�¯�¿�½?�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
FerroChrome is a kind of Ferro alloy which is formed by Ferro and Chrome,it is an important alloy addition in steel making. Ferrochrome (Fe Cr) is an alloy of chromium and containing between 50% and 70% chromium.
We are a professional supplier & exporter of rubber and plastic products in China.
We can help you supply the following products with best price and high quality,
