We bring to our esteemed clients a range of innovative Sheet, Plates & Coils that have been developed to meet the requirements of the changing trends. These efficient Sheet, Plates & Coils are used in a various mechanical and general engineering industries.
1518 Anodes Of 88 Kg Each With A Total Of 121.5 Tons. Approx. Value Usd917.05
Ex Work Mine.
Skills Requirement Anodes:
Technical Description:
1. The Surface Of The Anode Plate Is A Lead-based Alloy Rolled Plate, And The Composition Of The Lead Alloy Plate: Sn: 0.8â?¡0.02%,
Ca: 0.08-0.1%;
2. Lead Raw Materials Used In Lead Alloys Are Pb 99.99 Lead Ingots Specified In Gb/t 469: The Chemical Composition Of Copper Conductive Beams Is T2 Red Copper Specified In Gb5231;
3. The Quality Of Lead Alloy Plate Refers To Ys/t 498-2006, The Surface Is Smooth, Clean And Flat, No Cracks, Layers And Slag Inclusions Are Allowed;
4. The Thickness Of The Lead-coated Layer Is Uniform And Tightly Bonded With The Copper Rod, The Surface Is Smooth Without Flash, Burr, Pores And Inclusions, And The Surface Has No Deep Scratches;
5. The Welding Seam Is Welded By The Reverse Button Method (the Plate And The Beam Have Dovetail Grooves) To Ensure The Welding Seam Of The Beam And The Plate Is Firm.
We are engaged in making Lead available in several forms including
LME registered and non registered 99.97% and 99.99% as well as
secondary ingots, foil, granules, powder, rod, shot, sheet, and wire.
Lead is a bluish-white lustrous metal. It is very soft, highly malleable, ductile, and a
relatively poor conductor of electricity. It is very resistant to corrosion but tarnishes
upon exposure to air. Alloys include pewter and solder.
Unik brand unformed lead plates din type 18 or 19 tubes or bs type 15 tubes suitable for forklift / golf cart etc. (traction & semi traction) batteries.
Seaworthy cartons stacked in fumigated wooden pallets
Chemical properties: A soft metal (face-centered cubic) with a blue-grey color and metallic luster. Melting point: 327.5â??. Boiling point: 1740â??. Relative density: d1811.3437. Soluble in nitric acid and hot concentrated sulfuric acid, insoluble in water. Uses: Used in compound semiconductors, refrigeration elements, infrared photoelectric conversion devices, high-efficiency temperature difference elements, and solders, etc. Uses: Used as analytical reagents and reducing agents Uses: Used as high-purity analytical reagents and reducing agents Uses: Used in the manufacture of cable sheaths, storage batteries, lead alloys, pigments, ammunition, sulfuric acid production equipment, and can also be used as X-ray protection screens, nuclear reactor equipment, etc. Uses: Used in storage batteries, cables, solders, etc. Uses: Used in cables, storage batteries, babbitt alloys, type alloys, and materials for X-ray protection, etc. Uses: Reducing agent for determining tin; reducing high iron to ferrous iron; used for the separation of iridium from platinum and rubidium; alloy manufacturing Uses: Mainly used in cables, storage batteries, lead smelting, scrap copper smelting, printing, solder, etc.
94010 Lead Plates Suppliers
Short on time? Let Lead Plates sellers contact you.
Lead powder and lead concentrate are different forms of lead that serve various industrial purposes. Here's an overview of each:
Lead Powder: Form: Lead powder refers to finely ground particles of lead metal, typically in powder or granular form.
Uses:
Battery Manufacturing: Lead powder is often used in the production of lead-acid batteries.
Radiation Shielding: Lead is known for its ability to absorb and shield against radiation, and lead powder can be used in various applications where radiation protection is required.
Ammunition: Lead powder is a component in the production of ammunition and bullets.
Metal Coatings: It may be used in the manufacturing of certain types of paints and coatings.
Lead Concentrate:
Form: Lead concentrate is a raw material derived from the mining and processing of lead ores. It is not a pure form of lead but rather a mixture containing lead and other minerals.
Composition: Lead concentrate typically contains lead sulfide (galena) as the primary mineral, along with other sulfide minerals.
Processing: The lead concentrate is further processed through smelting to extract pure lead metal.
Uses: Lead concentrate is a crucial intermediate product in the production of refined lead.
It is an essential raw material for lead smelters, where the lead is separated from impurities and processed into the desired forms.
Lead concentrate may also contain valuable by-products such as silver and zinc.
Our company has rich experience and expertise in supplying a wide array of Lead Ore that are used in making electrical equipments, radiators among other industries. They are fabricated using premium-quality raw-materials in compliance with the prevailing industrial standards of quality.
They are offered to clients at affordable rates. The composition varies from client to client. We also export these quality-tested products to our esteemed overseas clients through reliable shipment modes.
Nigeria is one of the Africa countries with abundant lead natural resources deposits and minerals. Lead is a metallic element primarily produced from the mineral, galena.
Most mineral ore contains lead with only about 3 of these minerals commercially viable, they are galena, cerussite, and anglesite and are mostly found in conjunction with other metals like zinc and silver. We have the capacity to supply more than 1000MT monthly.
1980 Cathodes of 42 kg each with a total of 83 tons. Approx. value
USD467.17 ex work mine.
Skills requirement Cathodes:
Technical Description:
Board surface: 316L stainless steel, surface finish: 2R (Ra0.30-0.50um), there should be no micro-cracks and no obvious scratches or scratches on the board surface, and no deformation such as unevenness, delamination, etc. is allowed.
The flatness of the board surface is less than or equal to $1.5mm, the plumbness of the board surface: the error at the bottom of the board surface is less than or equal to 3mm, and the difference between the diagonal lines is less than or equal to $1.5mm.
Conductive rod (steel-copper composite rod): The conductive rod is clad with copper, the copper is T2 electrolytic copper, and the steel is 316L stainless steel.
The center line of the conductive rod coincides with the surface of the board, and the perpendicularity (drape) of the board surface and the conductive plane of the conductive end is +3mm; the parallelism of the two conductive planes of the end of the conductive rod is $0.5mm.
The bottom milling "V°-shaped groove is opened, and the conductive beam and the stainless steel plate are fully welded by fully automatic laser on both sides.
Can be cater made to suit requirement at Constructions ( Plumbing and Roofing), Foundation ( Shock observer), Copper Recovery Refineries, Ferrous Tank Linings and for Radiation protection ( Hospitals and Nuclear plants)
We are operate in the supply of Aluminum Ingot, Zinc Ingot, Copper Cathode, Copper Rod, Copper Wire, Aluminum scrap, Zinc Ingot, HMS 1 & 2, AC/ Fridge Scrap, Engines Scrap, Used Drained Lead Battery Scrap, PVC Scrap, HDPE, LDPE and other Metal scrap from wide range extraction materials.
We are trading in the finest quality Metal Scrap/ Aluminum Scrap, which are recycled for producing pure copper products and equipment.
Remelted Lead Ingots are being produced from Raw Lead / Battery Scraps / Lead Scraps and other scraps of Lead in the specially designed Blast Furnace. The Scrap is obtained and is mixed with other reducing agents in the Furnace.
Galena, also called lead glance, is the natural mineral form of lead(II) sulfide (PbS). It is the most important ore of lead and an important source of silver.
...
Galena Lead glance
Category
Sulfide mineral, octahedral subgroup
Formula (repeating unit)
PbS
Strunz classification
2.CD.10
Dana classification
2.8.1.1
We have Mines Source from Laos with total reserve about 2.000.000 MT of Lead Ore. Purify reach to 79% and over.
Capacity: 10.000 MT per Month
Shipping Terms: Exw or FOB Nghi Son port, Vietnam.
Payment: LC at sight or TT against Documents
We are Ummehani Industries Manufacturers, Exporters & Importers of remelted lead ingots. We are buying scrap materials from different sources and processing it securely to mitigate environmental pollution to a greater extent.
We have built a well-equipped infrastructure facility. We have divided our infrastructure into different units for the smooth flow of the entire processing operation. Our units are facilitated with contemporary tools and advanced technologies that are essential for presenting immaculate quality cadmium and lead products at a rapid production rate.
The head office is located in Moradabad (Uttar Pradesh) INDIA, but our customers can be found worldwide. Our customers are mainly in the metals industries around the world.
94010 Lead Plates Suppliers
Short on time? Let Lead Plates sellers contact you.
