Electrical voltage tester
Contact ac voltage range: 80v to 500v
Long life of neon lamp, turn/off 50000 times or more, flash up to 20000 hours
Shell made of transparent plastics, impact-resistant, insulation voltage up to 1000v
The end with a hole for hanging up, hardness of blade head up to hrc52
PSM1500 AC/DC standard meter is a new generation of standard meter produced by hangzhi precision. The product adopts a new software and hardware design, which can simultaneously measure single-phase AC and DC voltage, current, frequency, phase, active power, reactive power, inspecting power, power factor, active energy, and reactive energy etc., at the same time, high-order harmonic distortion (up to 63 harmonics) can be measured.
Votlage Measuring Range: DC1000V / AC707V
Current Measuring Range & Accuracy: DC1500A @ 0.02% Accuracy, AC1000A @ 0.05% Accuracy
PSM1500 AC/DC standard meter can be widely used in metrology research institutes, government inspection agencies and other metrology fields for the metrological verification of single-phase AC and DC voltmeters, ammeters, electric energy meters and power meters.
GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.1or 0.2, used for testing single phase electricity meters error on site. Wide measurement range from 1mA to 120A and 0 to 300V, and also can be used to test alternating current parameters - voltage, current, active power, reactive power, apparent power, harmonics, phase angle, power factor, frequency, energy etc.
Designed to test all types of relays.
6 x 30 a ac/dc
4 x 125 v ac/dc
1x 3 a /100v
1 x 0-265 v aux DC
8 binary inputs
4 binary outputs
Rs 232, ethernet port
Based on linear power amplifier techmology, the test set is highly accurate and is the economical solution for relay testing.
We are a worldwide leading manufacturer of measuring instruments. We are actively looking for distributors worldwide. Should you want to distribute the best quality products with great product availability at competitive prices, please do not hesitate to contact us.
204441 Electric Testers Suppliers
Short on time? Let Electric Testers sellers contact you.
Application
GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets,.
Technical Indexes
1.Temperature Control:
Oven: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Injector: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Introduction
GF1021 portable single phase energy meter test system used to test single phase energy meter. Adopt mature signal synthetic and power amplifier technology, high precision voltage source and current source output. Widely used in lab and field, and then as single phase standard source.
TECHINICAL SPECIFICAITON
Accuracy class 0.05%, 0.1%
Power supply One Phase AC 85-265V, frequency 50/60Hz.
AC Voltage output
Range 57.7V, 100V, 220V, 380V; max 500V
Adjustment range (0-120)%RG(1)
Adjustment fineness 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional.
Stability 0.01%/120s
Distortion 0.1% (Non-capacitive load)
Output load max 30VA
Measuring accuracy 0.05%RG
AC Current output
Range 200mA, 1A, 5A, 20A, 100A; max 120A
Adjustment range (0-120)%RG
Adjustment fineness 0.01%RG, 0.1%RG, 1%RG, 10%RG as optional.
Stability
Microcomputer Vertical Tensile Strength Tester, Computer paper tensile testing machine is widely used in paper, paperboard and other non-metallic materials tensile strength, elongation, tensile energy absorption determination test occasions.
To test the oxygen transmission rate (OTR) of packaging materials, such as plastic film, composite film, coextrusion film, aluminum-plated film, aluminum foil, infusion bag,etc.Widely used in the industries of food, pharmaceuticals, personal care, household, electronics and so on.
Features:
* LCD display of 128 64 matrix is used.
* Hardness scales(HV ,HB,HRC,HRB,HRA,HS).
* RS232 interface and USB to PC
* Max 600 groups impact times:32¡«1 of data can be stored at internal.
* Back light display has been used to make convenient or the user in poor light.
* Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
* Material of cast steel¡± is added HB values can be read out directly when D/DC impact device is used
to measure cast steel¡± workpiece.
* Power is two of AA battery. Continuous working period: approx. 100 h (no back light on).
* Software of PC can be installed according to the requirements of user. The function will be more powerful
to satisfy the more demands of quality control and management.
Ft-f1 fogging tester
Characteristics:
Determines auto's fogging characteristics precisely, guarantees automobiles driving safely.
Be applicable for the laboratory and works in low noise. Data test and analysis with professional software, convenient and prompt.
Bath temperature controlled by thermostat can be kept constant to 0.1ªc, creating precise testing conditions. Designs friendly and integrally, operates safely and conveniently.
World-famous brand elements with stable and reliable performance.
The strictly controlled constant thermostat can be used for the other experiments.
Conforms to din 75201, iso 6452, sae j1756.
A great scientific innovation must lead to a great technological breakthrough. Tck•w portable rope testers weigh only 1.8 kg, about 1/6~1/25 of the weight of conventional ndt testers. The sensitivity of tck•w sensors could reach 5v/mt, and about 700times higher than conventional sensors. The gap between sensor and wire rope is about 20-30mm which achieves non-contact inspection, it does not affected by grease, normal warped wire, and rope-running speed which shown that passing-through capacity is good. When an inspection is completed, tck•w rope testers are capable to display testing data, flaw graph, data table, and test report on lcd screen. After connected to a computer and printer, a formal test report could be printed, which provides scientific reference for users to use wire ropes more safely and replace wire rope more properly.
Key features
1. High inspection precision, strong resolution and stable performance: “weak magnetism sensor” technology invented uniquely by our company, its sensitivity is 700 times higher than traditional tester. The sensor has strong resolution, and can inspect quantitatively actual wire rope flaws under various working status.
2. Small volume and light weight: the weight of w portable flaw detector is less than 2kg, which is only 1/6—1/20 of similar products at home and abroad.
3. Easy operation: inspection system realizes intelligent “fool” operation; on-line lock or unlock only needs 1 second; it only needs one person to operate, and the operation is much easier than using a mobile phone.
leak tester (0- -90KPA) for testing of the leakage of the packaging . meet the astm D3078 standard.
we have 3 different chambers 210*270mm 360*585mm 460*330mm.
Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.
Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.
Application
GC-7960 Ethylene Oxide Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets as well as various kinds of sterilization apparatus and instruments.
Standards
YBB20162012ã?�YBB20172012ã?�YBB20182012ã?�YBB20252012ã?�YBB20262012ã?�YBB20272012
Application
OTR-1901 is based on the coulometric sensor method and available for the OTR test of flexible films, sheeting and packages. It can test 3 specimens in one operation with independent results.
GTR-7004 tester is suitable for the analysis and determination of the porosity, the air permeance and the air resistance of various kinds of battery separation membranes, paper, paperboard, textiles, non-woven fabrics and other materials.
204441 Electric Testers Suppliers
Short on time? Let Electric Testers sellers contact you.
