Hc-series injection molding machine equipped with top-ranking hydraulic system, electric system, sealing system are designed of high level and manufactured of precise. Our lineup ranges from hc-600h to hc-16000h with max clamping force accordingly. Specification for hc-series plastic injection as follows: shot weight from 80 to 10800 grams, clamping force from 600 to 16000 ton, opening stroke from 300 to 1580mm, tie bars space from 320*320 to 1520*1480mm, motor power from 7.5 to 155kw
Waste plastic recycling line. The whole recycling line adopts germany technology. In order to improve capacity and quality of final product, we can change technological process according to the requirement of different materials. Details as follow:
Pet bottle, flake recycling line capacity: 300-1000kg/hr
Pe, pp film recycling line capacity:300-750kg/hr
The production line is highly automatic, and it is used for pe/pp film washing, dryer and granulator, pet bottle crushing, washing, dryer and palletize.
For pet palletizing, after being washed, dewatered and dried, the water content will be very low; pp/pe film after being washed can be directly granulated(water-ring palletizing), the gained granules are even and smooth with shiny surface.
We design new type of extruder, and cutting under water to ensure the perfect quality of pet granule. It is ideal equipment in waste plastic recycling industry, with reliable quality and competitive price.
The control table is separated from the machine, and reach the propose of centre controlling.
Hc-series extrusion production lines are as follows: tsk series parallel twin screw extruder, mono screw and dual screw extruder, extruding line for pe/pp pipe, extruding line for upvc/ppr/pe-xa pipe, aluminum-plastic complex pipe production line, pvc plate extrusion and pet baling strap production line
Hc-series blowing molding machine are designed for chemical packing, medicine packing, juice, beverage bottle, mile bottle, drink water, (3/5/6gallon) pc barrels, agriculture pharmacy bottle, lubricant oil packing industry, blowing plastic parts for automobile, blow plastic chairs, blow plastic parts for motor cycles, hardware tool packing case, plastic barrels for chemicals and all sorts of large scale blow plastic products for civil, agricultural and entertainment facilities.
We supply patent auto bottle blowing products line. With multi die head, high capacity and low consumption for milk packing use. Blowing filling sealing 3-in-1 automatic liquid packing production line system are designed for tonic drink bottle in small volume
The co. Has applied west european technique, which is specialized in designing, and producing three catalogues, twenty three series, 118 kinds of specifications and models of fully automatic blow molding machine
5599 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
The machine is one-step blow bottle equipment. It is used to make 5-500 ml plastic bottles. The machine output reached maximal 40, 000pcs bottles per day. Suitable for most thermoplastic resins such as pe, pp, ps and so on .Its products are widely used in medicine packing, the cosmetic packing of making up chemical industry, gifts & toys and so on.
Cavity number of one mould and volume of bottle. (for reference)
Volume*cavity quantity: 8ml*6 piece, 15ml*6 piece, 20ml*6 piece, 40ml*5 piece, 60ml*4 piece, 80ml*3 piece, 100ml*3 piece
Omachine weight: 4 t
Verall size l* w* h: 3400*1150*2300 mm
Packing: sea-worthy strong wooden cases
1.The mould use the ice water to cool and recycle, which can promote the efficiency of moulding
2.To make pc.Pet helmet lens needs strong experience, especially for the polishing of mould lens surface
3.The mould cavity of pc.Pet helmet lens mould is made of the imported s136 materials and treaded by chrome plating. To assure the polishing and wear resistance of products
4.The moulding runner should pour via sides of trapezoid shape to avoid cool materials, with 95kgs pressure , 245f¦ temperature and 20s for moulding time
5.The time for finishing mould is 60 days and the price is rmb 38, 000
1.Because of low cost, big capacity and cheap price, the pb-acid accumulator used widely, but if used in a wrong way, its life would be reduced too much . There are many factors which can affect the life of accumulator, but to charge the battery in a correct way can increase the life of accumulator. According to the research, the process of charging the battery has big influence on its life but the process of discharging the battery has little influence on its life, that is to say, the accumulator become bad is not because of normal usage but because of charging. Therefore , a good accumulator has played big role in the life for battery.
2.The accumulator contains 3 sets. The accumulator mould cavity is made of sweden 2738 materials to assure its polishing and wear resistance
3.The point gate of mould runner , with 100kgs pressure ·+210f¦ temperature and time of 55s.
1.The basic requirement of dust collector has strong suction, strong percolate ability and permanence.
2.The mould contains 10 sets, thereinto, industrial dust collector mould is made of the imported 718h materials and to assure of its polishing and wear resistancef·the dust collector suction should coordinate and be effective to reduce noise.
3.The product use recycled flowing water to assure high efficiency of mouldf·
4.Side pin gate of the mould runner with s shape to pour the ends to avoid cool materials, with 75 kgs pressure, 195f¦ temperature and time for 45s.
5.The time for finishing mould is 45 days and the price is rmb 220, 000
1 two sides glide plates of electric kettle mould were designed to pull thick stick , which is a high efficiency in the production
2·½the product use recycled flowing water to assure high efficiency of mould.
3·½to make electric kettle mould need a strong experience, especially the scale of withdraw in moulding.
4.The mould runner with vertical gate, within 95kgs pressure, 195f¦ temperature and time for 45 seconds.
5.The time for finishing mould is 30 days and the price is rmb 160, 000
Mould name: injection mould for grade traseira fd40-2
Brand: meiduo
Material:
Cavity 2344
Core: 718
Type of runner: cold runner
No.S of cavity: 1*1
Part material: pp shrinking ratio: 1.8%
We can design and manufacture moulds as requested.
We are trying to gain or inventing the products to be produced for the first time by our Research and Development Institute by means of the computer programmes called UNIGRAPHICS Cad-Cam. We also make moulds for plastic and aluminium injection.
5599 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
