We can design and manufacture all kinds of plastic mould for auto parts according to your sample or drawing. This type of part is just one of the mould & product we' ve made before, we hold cad/cae/cam system in plastic mould product design, molding & programming, we have many years specialized manufacture plastic mould engineers and technicians, so we can manufacture products with large-scale, exact, complex & long life mould.
1) this whole production line is used to crush, wash, dewater and dry pp, pe film.
2) it takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety, reliability, etc.
3) this whole production line is automatic controlling, structure arrangement compact, high production efficiency, nice cleanness.
4) production capacity: 200-1000kg/h.
5) after drying the water content can reach 5-8% (according to the thickness of film).
1. Features and application:
1) the whole production line can be used to crush, wash, dewater and dry pet bottles.
2) it takes the advantages of simple structure, easy operation, high capacity, low energy consumption, safety, reliability, etc.
2. Features:
1) cleaned material: impurity content<=0.1%; water content<=3%
2) production capacity: 300-3000kg/h.
3) note: we can make the machine exactly according to your requirements.
1) double-ranks recycling & granulating system is mainly used to recycle and reprocess pe, pp waste plastic.
2) we use force feeding, as the screw can exclude air and steam. After plasticization and extrusion, the particles can have high density, nice surface, high output, stable extrusion. Customers can certainly adopt which feeder they like.
3) production capacity: 100-500kg/h.
4) these machines are for different customers to choice. And we could also design special material granulator line according to the customers' request.
1) plastic granulator system with compression bunker:
2) this production line is mainly use to reprocess industry leftover material and disqualification material. The material can plunge into compact bunker directly. After rend by rotary-blade tray and fixed blade, pre-plastic small granule sent to the extruder feeder throat, the production process can reduce pollution effectively by crush with electricity and material convey.
3) the configuration of production flow is concision, high efficiency, high output, low consumption.
4) the granule manufacture method have to be bar cutting and water-cycle transverse section cutting. And it also can deal with the hot-sensitive material.
5) the production capacity is 100-500kg/h.
6) different customers can choice different machines. We can design special production line if you use special material.
Wooden cases or other fix methods
5586 Injection Moulded Products Suppliers
Short on time? Let Injection Moulded Products sellers contact you.
Using PET material, KINTL-5G could blow extra-large bottles of 5 gallon volume. Those bottles are mainly used to contain pure drinking water for office and family uses. As the market of pure drinking water is expanding rapidly those years, the inquiry of extra-large bottles is also keeping on increasing. Our KINTL-5G is designed to produce high quality water drums at very competitive prices. It uses high quality electrical and pneumatic parts imported from Germany and Japan to ensure stable and effective work. The complete production line for making 5 Gallon PET bottle manufactured by our factory includes:
1.)Main blow molding machine 1 unit
2.)Preform Preheater 1 unit
3.)Voltage stabilizer ( 50KW) 1 set
4.)Chilling type air dryer(with built in rear/front filter) 1 set
5.)Low pressure air compressor 12.5Kg/0.8M3 1 set
6.)High pressure air compressor 30Kg/0.7M3 1 set
7.)Blow mould for 5 Gallon bottle 1 cavity 1 unit
Product Feature
MAIN BLOWING MACHINE
SIEMENS PLC controller. FESTO hydraulic elements, valves and pipes. MISHUBICH VVVF motor. The mould clamping system design is adopted by the advanced toggled lock design producing strong clamping force. The mould thickness can be adjusted by gear-turned belt automatically. On the blowing base of machine, an automatic moving device is assembled.
PREHEATER
The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products
Product specification / models
Total power of the whole system in kw. 22.5kw
Total power consumed by pet blowing machine in kw. 3
Power consumed by the preheater in kw. 7.2kw/220v
Total power consumed by the two air compressors
(high pressure and low pressure). 7.5kwx2
Production capacity
400bph for 5l bottle
90bph for 5 gallon bottle
1) made from silicone rubber and plastic, new products, new technology , excellent abrasion resistant
2)injected plastic keycaps, back lighting, hard spray coatings
3)designed for use with led backlight:
4)backlight printing, keycaps with pu coating to protect artwork
5)available in epoxy coating or spray-painted with colored keys upon request
6)special printing technology guarantees the letter on the button of keyboard not to be worn away for a long time
7)application: remote controllers, mobile phones, calculators, hand-held games,
Pcs, notebook computers, switches, remote controls, databanks, toy games, micromeasurement equipment, typewriters, cordless phones, rubber washer
Moq:5, 000pcs
Payment terms:40% deposit, balance before shipment
This machine is suitable for producing g.R.P. (glass reinforced plastic) sections in different shapes & sizes like angle sections, 'c' channels, hollow rectangular and circular-tube sections, solid rods etc.
Specifications :
Pulling capacity : 2000kgf to 10000 kgf.
Pulling speed : 0.08 mtr/min. To 2.1 mtr/min.
Die clamping bed : 1000 mm x 1100 mm
Carriage size : 600 x600 to 1000x800 mm.
Grippers : 2 or 3 nos / carriages.
Carriage movement : by hydraulic power.
Clamping force by pneumatic system
Electrical power required : 2.0 to 7.5 kw for hydraulic power pack
Heating requirement (depending up on size of mould)
Compressed air required : approx- 10-12 cfm, & 5 -6 kg/sq.Cm pressure.
Accessories :
Glass roving (creel) stands, roving guides, perform guides, resin impregnation bath, resin pressure injection system, glass mat roll feeding station, automatic section cutter, section conveying roller table, glass mat slitter & pultrusion mold
We are able to provide you satisfied moulds and products. With only your drawing on hand, we will send you the satisfied sample with the best price no matter where you are. Any call or email to us will be a good starting of our successful cooperation.
Applicable material : pe/pp film
The condition of the material: the proportion of water should not more than 4%, without metal , stone and other impurities.
The maximum output : ldpe/ hdpe=260í½300 kg/h pp= 150í½200 kg/h
