Find Verified Tractors Suppliers, Manufacturers and Wholesalers

Husqvarna mz6128zt (61") 28hp zero turn mower (2



Cma-cgm, ups, fedex

Husqvarna rz3016 (30") 16.5hp zero turn mower

For prices and more information


Cma-cgm, ups, fedex

Husqvarna RZ4216 (42") 16HP Zero Turn Mower (2011 model)



CMA-CGM, UPS, FedEx

Husqvarna rz4222f (42") 22hp zero turn mower (2011 model)



Cma-cgm, ups, fedex

ROPS/R1 Tires
45 Gross HP 4 Cylinder Diesel Engine
39 PTO HP
F8/R8 Gear Drive Transmission
Dash Mounted Shuttle Shift Forward to Reverse
High Strength Cast Iron Axle Construction
Independent 540 RPM PTO
3-Point Category I Hitch, Flexible Link Ends, Telescoping Stabilizers
16.9 GPM Pump Capacity (Total)
1830 Lb. Rear Lift Capacity
Single Rear Remote
Dimensions: 134"L x 66"W x 93.9"H. Weight: 3836 Lbs.

Model: 8N Boomer
Fuel: Diesel
Drive: MFWD
Engine HP: 50.


Original box Ford New Holland 8N boomer with loader - MFWD.

Traction and Drive
System Voltage : 48V nominal
Traction Drive : AC; 3 hp (2.2 kW) continuous
Reel Drive : One brushless DC motor per reel; 1.3 hp (0.97 kW) continuous
Reel Lift : One linear actuator per reel with individual control
Tires, Brakes and Steering
Tires : 18 x 10.5 x 8, 4-ply
Parking Brake : Automatic electro-magnetic multi-plate
Steering : Variable ratio by-wire steering with feedback control
Reels and Blades
Number and Size : Three 22 in. (0.56 m) reels; 5 in. (127 mm) diameter
Number of Blades : 7, 9, 11
Cutting Frequency : 0.05 - 0.25 in. (1.2 - 6.3 mm) with 11 blade reel; Electronically adjustable
Overall Cutting Width : 62 in. (1.6 m)
Height of Cut Range (Depending on turf condition and bedknife installed) : 0.062 - 0.438 in. (1.6 - 11.1 mm)
Backlapping : Standard on-board backlapping
Speed
Mowing : 0 - 5.0 mph (0 - 8.9 kph); Electronically adjustable max speed
Transport : 0 - 9.0 mph (0 - 14.5 kph); Electronically adjustable max speed

Reverse: 0 - 4.0 mph (0 - 6.4 kph)

Weight and Dimensions:
Weight with Reels Up : 1615 lbs. (756 kg) with all fluids
Weight with Reels Down : 1342 lbs. (624 kg) with all fluids
Length with Catchers On : 101 in. (2.57 m)
Height with ROPS : 79.3 in. (2.01 m)
Wheel Base : 52 in. (1.32 m)
Width : 58.75 in. (1.5 m) outside of tires
Overall Width : 67.7 in. (1.72 m) with reels
Ground Clearance (at reels) : Front: 6.125 in. (15.5 cm) Rear: 4.25 in. (10.8 cm)
Turning Circle : Inside: 20.25 in. (0.51 m) Outside: 144.25 in. (3.7 m)
Approximate Run Time Per Charge : 3 - 3.5 hrs.


Original box.

Yanmar TNM 26HP Diesel Engine:
Interim Tier 4 (IT4)-compliant isolated Yanmar Diesel Engine
High-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economy
Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
Single-piece side panels and front grille screen provide excellent air flow and can be removed for easy and quick access to the engine
Horizontal exhaust discharges fumes away from the operator station, reducing noice and improving operator visibility and comfort

Easy Operation 4-Wheel Drive and Power Steering:
Both 4-wheel drive (4WD) and power steering are standard on the John Deere 1026R, allowing for excellent maneuverability and easy of operation of the tractor
Narrow overall width allows the John Deere1026R to work in tight areas where most compact tractors cannot fit
Power steering means fewer turns of the steering wheel compared to manual steering, which becomes a valuable feature when used with a front loader or other attachments
High horsepower-to-weight ratio allows for easy completion of a variety of tasks, while the overall reduced weight makes for an excellent mowing tractor

Hydrostatic Transmission with Twin Touch foot controls:
Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
The hydrostatic drive unit functions both as a clutch and transmission
Twin Touch foot controls allow selecting both speed and direction of travel with the touch of a foot, ideal for jobs where productivity is a must
Infinite ground speeds, even at full throttle, to match the job
Large foot pedals were designed for operator comfort and allow for convenient operation of the tractor.

The John Deere S140 riding lawn tractor is the most affordable 48-inch deck model of the 100 Series line up. The 22-HP, V-Twin John Deere engine has plenty of power to handle tough mulching, mowing and bagging conditions (coverage up to 2 acres). The ride is comfortable. It features a hydrostatic transmission, side-by-side foot pedals, enhanced styling, adjustable controls, 15-in heat-resistant open back seat and a front bumper. The 48-inch Edge Cutting System is also time-tested and proven to offer superior cut quality and can be easily equipped to bag or mulch.

Detail
Ammeter
Yes
Assembled Weight (lbs.)
468
Attachment Compatible
Front and rear
Bagger Capable
Yes
Blade Engagement Type (PTO)
Electric
California Air Resources Board Compliant
No
Cruise Control
No
Cut Width (Inches)
48
Cutting Range/Yard Size (Acres)
1-2
Deck Gauge
12
Discharge Location
Side
Engine Displacement (Cu. Centimeters)
724
Engine Horsepower
22
Engine Oil Capacity (oz.)
64
Engine Oil Included
Yes
Engine Series
John Deere Branded
Engine Type
V-twin
Front Axle
Cast iron
Front Wheel Size
15-in
Fuel Capacity (Gallons)
2.4
Grease Fittings
Yes
Headlight(s)
Yes
Hour Meter Type
Meter only
Loweâ??s Exclusive
No
Maximum Cutting Height (Inches)
4
Maximum Forward Speed (MPH)
5.5
Maximum Reverse Speed (MPH)
3.2
Minimum Cutting Height (Inches)
1
Mower Deck Width (Inches)
48
Mulching Capable
Yes (kit sold separately)
Number of Blades
3
Number of Deck Positions
16
Number of Deck/Anti-Scalp Wheels
4
Oil Filter Type
Standard
Operator-Controlled Mow-in-Reverse
Yes
Overall Length (Inches)
69.7
Overall Width with Deck (Inches)
60.8
Rear Wheel Size
20-in
Recommended for Terrain Type
Flat with obstacles
Seat Type
High-back
Steering Type
Standard wheel
Transmission Type
Side by side foot pedal hydrostatic
Turning Radius (Inches)
18John

Reinforced Cutting Deck:Designed with heavy flat-stock steel for high durability.
Pedal-Operated Hydrostatic Transmission:Manage the speed and direction with pedals, allowing you to keep your hands on the wheel.
Cast Iron Front Axle:Provides superior stability and balance.
Cruise Control:Maintain a constant speed, even on uneven and rough terrain.
Large Tires:Improved traction and reduces damage to the ground.
Transparent Fuel Indicator:Easy to check fuel level.
Deck Wash Port:Connect a hose to the deck wash port to clean underneath the deck easily.
Ergonomic Steering Wheel:Ergonomically designed and angled comfortably in an ideal operator's position.
Cutting Height Adjustment:Fender-mounted deck lever is spring assisted for easy use.
Headlights:Easier to operate in the dark.

Are you looking for a fast lawn tractor that can handle large areas with speed, but still have the traction ability to conquer steeper hills? If so, the Husqvarna YTA24V48 is for you! This tractor has a power 24 HP Briggs and Stratton V-Twin OHV Engine which is sure to help you zoom around your yard with ease! Plus, a 48â?? cutting deck will help you cover more space in less time!
A stamped steel mower deck reinforced with 14 gauge welded steel tubing is sure to give you a mower deck that will last through all the bumps and scrapes that occur over time. In addition to being durable this mower has a pedal operated RS800LR CVT Automatic Transmission. Unlike hydrostatic transmissions, there are no pumps, oils or motors to deal with. With the CVT the transmission is sealed and never needs maintenance. The CVT eliminates the need to shift gears and does not need a clutch, you will never have to slow down to shift gears again, just adjust the pressure on the pedal to control your speed and let the transmission do the work.