Find Verified Cosmetic Chemicals Suppliers, Manufacturers and Wholesalers

Clean the floor with a perfect and refreshing fragrance.

Lc 106 is an ideal steam line anti corrosion treatment for
Boilers. It is a highly concentrated, alkaline product.
Eliminates corrosion in the outgoing steam lines and
Stabilizes ph in the condensate.
Application
For use with boilers which requires anti-corrosion treatment in the steam lines. It
Disperses with steam and forms a protection film on the inner surfaces of the
Steam pipes. Injected directly into the boiler by means of a proportioning pump.
It is environmentally safe. Do not use in boilers where steam
Contacts food.
Dosage
Initial : 1 quarts per 100 gallons or 1 : 400
Maintenance: 1 quart for every 200 gallons of make-up water or 1 : 800
Maintain ph of 7.5 – 8.5 in the steam line of system. Maintain sulfite of 30 – 60
Ppm along with lc 106. Maintain the conductivity less than 5000 mho/cm.
Handling & precaution
Lc 106 is an alkaline product and should be handled with care to prevent
Personal injury. Wear protective clothing and eye protection. In case of contact
With skin, immediately flush with water. In case of contact with eye, flush with
Water for 15 minutes and obtain immediate medical attention. Triple rinse used
Cans before reuse or disposal.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 121 is specially formulated for large installations and
High hardness water. It is developed for effective,
Economical cooling tower treatment at hospitals, hotels,
Large apartment houses, office buildings and other
Industrial and institutional cooling installations. Also
Recommended for a small installations with high
Hardness make-up water. It contains no phosphates,
Chromate, zinc or other chemicals that cause pollution
Problem. Helps control mineral deposits, sludge and
Surface pitting and does not stain automobiles or
Buildings.

Application
Use a reliable automatic proportioner with timer for controlled dosage.
Directly inject in to the circulating pipe upstream from the condenser. Cycles
Of concentration will vary from 5 – 20 as a probable upper limit. For higher
Limits consult our laboratory.
Dosage
Initial treatment : add 1 gallon of lc 121 per 2, 000 gallons of re-circulating
Water. Maintenance treatment : 1 gallon per 6, 000 gallons of water lost to
Bleed off.
Handling & precaution
Wear protective clothing and eye protection should be worn. In case of skin
Contact, immediately flush thoroughly with plenty of clean water. In case of
Eye contact, flush with copious of amounts of water for 15 minutes and
Obtain immediate medical attention. Refer to msds for more specific
Directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged

Lc 126 condenser water treatment does not use sodium
Chromate, zinc or other toxic chemicals in its composition. It
Eliminates the serious pollution problems usually associated
With the use of such chemicals for corrosion and scale
Control in cooling system. It protects medium size cooling
Towers against scale, sludge and corrosion. Lc 126
Contains a special anti-foulant additive to reduce
Accumulations of mud and silt in condenser tubes. Ideal for
Average towers with 75 to 500 ton capacity.
Application
Formulated for use in open re-circulating cooling water systems found in air
Conditioning and process operations. Apply manually, directly to the cooling
Tower basin.
Dosage
Initial dosage : add 1 gallon of lc 126 for every 500 gallons of system
Capacity.
Maintenance dosage : add 1 gallon of lc 126 for every 1, 000 gallons of
System water lost to bleed off from the cooling tower system
Handling & precaution
Slightly alkaline aqueous solution. Keep out of reach of children. Refer to
Material safety data sheet for more specific procedures and directions.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 141 is single product treatment designed to prevent
Scale deposits and corrosion to ferrous and non-ferrous
Surfaces in hot water heating systems and chilled closed
Loops. It passivates the surfaces and forms a barrier layer to
Inhibit corrosion. It is a synergistic combination of
Phosphonates, polymers and phosphate.
Application
Easily feed/injected directly into the system by means of a chemical by
Pass feeder.
Dosage
Initial treatment is 1 gallon per 1, 000 gallons of water in the system. There
After add lc 141 to maintain a level of 25-35 ppm (mg/l) of
Orthophosphate.
Handling & precaution
It is highly alkaline and should be handled with care to prevent personal
Injury. Protective clothing and eye protection should be provided and worn.
In case of skin contact , immediately flush thoroughly with plenty of clean
Water. In case of eye contact, flush with copious amounts of water for 15
Minutes and obtain immediate medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 143 is specially formulated for use in systems that are
Constantly exposed to air, such as vented air to pressurized
Systems providing corrosion protection even in systems that
Are not tight. It reduces maintenance costs by keeping
Exchangers, air handling units and zone valves free of
Corrosion clogs. It also reduces corrosion insulation and
System damage. Lc 143 contains boron nitrate that protects
Against oxygen and acid attack, works well in any closed
System. Recommended for any hot water boiler or recirculating
Or closed loop system.
Application
Can be added to a system either manually or with a pot feeder. If the
Treatment dosage is less that the capacity of feeder, fill up the feeder with
Tap water to prevent air on treatment. Not to be used in electric
Steam boilers.
Dosage
For chilled water circulating system : for initial or maintenance treatment,
Add 1 gallon of lc 143 for each 200 gallons of chilled water. The treatment
Level is easily tested with the drop titration nitrite test kit.
Handling & precaution
Irritant. Avoid contact with eyes. Avoid repeated or prolonged contact with
Skin. If contact occurs, flush with water. If eye contact occurs, flush with
Water for 15 minutes. Seek medical attention. Keep out of reach of
Children. Refer to material safety data sheet for more specific procedures.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 144 is formulated to prevent and reduce scale,
Rust, corrosion and sludge in generator system. It is
The most effective coolant for generator and other
High temperature systems. Lc 144 is a special blend
Of selective glycols, anti-corrosion additives and
Sludge conditioners that provide smooth running of
The systems.
Application
Lc 144 is widely used in power plants, generator system, etc... Found in
Marines, aviations, industries, automotives, industries, hospitals, etc.
Benefits
? excellent protection
? no more severe
Damages
? non-flammable
? non-polluting
? non-corrosive
? non-toxic
? completely safe to
Use
? reduces costly
Maintenance
Dosages
1. Check incoming water source for total hardness and chloride.
2. Recommended total hardness below 30 ppm and chloride below 50
Ppm.
3. Lc 144 can be diluted at a ratio of 1:1, 1:5, 1;10, 1:32 with deionised
Water (recommended).
4. Repeat application monthly or quarterly depending on application.
Flush if colour changes or becomes cloudy.
Handling & precaution
For professional use only. To be used in well ventilated environment. In
Case of contact with eyes, rinse thoroughly with water and seek medical
Advice immediately. If swallowed, take plenty of water and seek medical
Advice immediately. Avoid prolonged contact with skin. Put on gloves for
Sensitive skin. Keep out of reach of children. Additional information may
Be obtained from material safety data sheet (msds).
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Lc 239 is a very strong descaler for destroying the most
Difficult scales. It effectively removes difficult scales, rust,
Oxides of metals, silica scale and hard soil from metal and
Other surfaces. It’s dissolving action is quick and thorough.
Most cost effective descaler when combined with lc 230,
Lc 233, lc 232 and lc 231. Do not use on materials like
Glazed tiles and glass. Must be used after dilution only.
Application
Dilute and blend with other descalers as necessary before dipping, brushing or
Spraying on surfaces. Clean surface free from excess rust, soil and dirt. Apply lc
239. Allow to stand for 10-20 minutes, then flush off with water. Surface may
Require repainting if necessary. Recommended to use lc 240 for neutralization
And lc 252 for passivating the native surface on ferrous metals. Avoid contact
With unwanted surfaces.
Dosage
For descaling purposes, dilute one part lc 239 with up to 20-100 parts of water
Depending on the type and thickness of scale and method of application. Allow to
Stand / circulate for several hours or as necessary. Flush with water until all the
Scale is removed. Repeat if scale is still present, check ph during application for
Control. Contact field chemist for further information. Do not use above 2% with
Non-chemical pumps for circulation
Handling & precaution
Strongly acidic. Irritating to eyes and skin. After contact with skin wash
Immediately with plenty of water. In case of eye contact irrigate thoroughly with
Water for at least 15 minutes. Seek medical advice. Avoid direct contact with
Glass, tiles and other such surfaces. Use adequate protective measures during
Use.
Packaging
Available in pail of 20 lt. Can also be custom packaged.

Lc 240 is a highly alkaline concentrated product designed
For neutralizing the metal surfaces that is susceptible to
Corrosion. Lc 240 consists of a blend of soluble carbonate,
Hydroxide and corrosion inhibitors. It is designed to control
Corrosion and neutralize any acid left from “acid cleaning”
Processes. It contains no chromate or heavy metals. It is
Food grade, user & machine friendly and environmentally
Safe. Neutralized mixtures can safely be disposed into
Sewers. [ p – powder / l – liquid ]
Application
Can be added directly into the liquid volume to give a 1% to 5% solution or add till
Ph value is between 6 - 8, which then may be used for neutralization & protection.
For offline storing purposes a 0.5% solution may be quite effective. The surface to
Be neutralized or get protection must receive a minimum of 5-10 minute contact
Time.
Dosage
Dosage is calculated depending on the circulating or storing volume and the time
Of contact. A diluted solution of 0.5% up to 5% is recommended. Use concentrated
Solution for less contact time & higher initial conditions, where as a 0.5% solution
May be used for storing. Ensure ph value between 6 – 8 before disposal.
Handling & precaution
This product is quite alkaline and should be handled with care to prevent personal
Injury. Protective clothing and eye protection should be provided and worn. In case
Of skin contact, immediately flush thoroughly with plenty of clean water. In case of
Eye contact, flush with copious of amounts of water for 15 minutes and obtain
Immediate medical attention.
Packaging
Available in pail of 20 lt. Can also be custom packaged.

Lifting rust on surface of iron, metal, etc.

Lc 253 is an alkaline concentrated food grade product
Designed for “passivating“ as well as neutralizing the
Metal surfaces that is succeptable to corrosion. Lc 253
Is also an alkaline formulation of phosphate, polymeric
Dispersants and corrosion inhibitors. It is designed to
Control corrosion and neutralize any acidic left over from
Acid cleaning processes. It contains no chromate or
Heavy metals.
Application
Can be added directly into the raw water to give a 2% to 10% solution,
Which then may be used for “passivating”, “neutralization” & “protection”.
For offline storing purposes a 0.5% solution may be quite effective. The
Surface to be passivated, neutralized or get protection must receive a
Minimum of 15-30 minute contact time.
Dosage
Dosage is calculated depending on the circulating or storing volume and
The time of contact. A diluted solution of 0.5% up to 10% is recommended.
Use concentrated solution for less contact time & higher initial conditions,
Where as a 0.5% solution may be used for storing.
Handling & precaution
This product is quite alkaline and should be handled with care to prevent
Personal injury. Protective clothing and eye protection should be provided
And worn. In case of skin contact, immediately flush thoroughly with plenty
Of clean water. In case of eye contact, flush with copious of amounts of
Water for 15 minutes and obtain immediate medical attention.
Packaging
Available in pail of 20 lt.. Can also be custom packaged

Lc 252 is designed to be used for “passivating” open &
Closed loop systems to prevent corrosion. It is a liquid blend
Of nitrite and other corrosion preventives which protects not
Only steel surfaces but also copper and other metal as well.
The high concentration makes it a cost effective nitrite based
Passivating agent with the added advantage of being multimetal
Compatibility and thus do not require separation of
Non-ferrous parts from a system during passivation.
Application
Normally injected into the system that is previously filled with standard industrial
Grade water and circulated continuously under required pressure for about 1-2
Hours with hourly monitoring of the nitrite concention. A higher temperature help to
Accelerate the passivating process and therefore reduce operation time. An
Appropriate temperature suitable to the system and available resources is choosen
Between 35 – 950c
Dosage
Initial : 1 : 400 is suitable in most cases of passivation processes operating at
Optimum temperature between 50 – 700c. Depending on the quality of water used
Some adjustment in the amount may be required to maintain the ph of the solution.
An increase in concentration of lc 252 is necessary in badly soiled systems.
Additional amount of lc 252 may be required to be added during the circulation for
The passivation process in order to maintain the required control parameters while
Monitoring.
Handling & precaution
Avoid contact with acid, ammonium salts and activated carbon. No respiratory
Protection. Is required, however, maintain adequate ventilation. Use rubber gloves
And safety goggles when handling.
Packaging
Available in pail of 20 lt.. Can also be custom packaged.

Provide a layer / coating that reject / hold water so it does not seep into the stone.

LC 201 is a strong porcelain cleaner for brightening &
cleaning difficult to clean porcelain surfaces. It’s special
formula contains complexing agent, scale remover,
wetting agent and specialized blooming remover. It is a
specialized product and requires careful application
methods.
WRONG & UNWANTED APPLICATIONS NOT
PRESCRIBED, MAY CAUSE UNEXPECTED RESULTS
& DAMAGE. Do not use undiluted. Make test spot before
application.
Application
Pour diluted LC 201 on the surface to be cleaned, spread it uniformly and allow it
to react for 2 – 20 minutes, depending on the type of stain & dilution factor. After
that, brush with soft brush then rinse thoroughly with clean water. Most effective
on dry surfaces, wear gloves during application. Never use on glazed surfaces.
Dosage
Always dilute with water depending on the cleaning work. Can be diluted up to 80
times.
Handling & Precaution
Contains only organic acidic compounds. Do not ingest. Do not get in eyes, on
skin or clothing. Keep the container closed when not in use. Avoid breathing the
mists. Wear a mask when handling. Use sufficient ventilation to prevent build-up
or mists. KEEP AWAY FROM CHILDREN. Use protective gloves
Packaging
Available in pail of 20 lt. Can also be custom packaged



.

we can supply you Shorea javanica resins
best quality
for packaging and capacity can be adjusted

uses of Shorea javanica resin
as a raw material for producing various products such as varnish, paint, ink, incense and cosmetics.

what if you want to ask about Shorea javanica resins
can contact us directly

1. Innovative formula, Curly, Thick, Lengthening
2. Solve the problem of thinning eyelashes and create long and dense eye makeup.
3. Long-lasting waterproof and no halo
4. Ingredients: palm tree wax, honey, glycerin, etc.

Seaweed" is the common name for countless species of marine plants and algae that grow in the ocean as well as in rivers, lakes, and other water bodies.

Seaweeds are used in many maritime countries as a source of food, for industrial applications and as a fertiliser. The major utilisation of these plants as food is in Asia, particularly Japan, Korea and China, where seaweed cultivation has become a major industry. The present uses of seaweeds are as human foods, cosmetics, fertilisers, and for the extraction of industrial gums and chemicals. They have the potential to be used as a source of long- and short-chain chemicals with medicinal and industrial uses.

Gracilaria Seaweed

Gracilaria is a genus of red algae notable for its economic importance as an agarophyte, as well as its use as a food for humans and various species of shellfish. Various species within the genus are cultivated among Asia, South America, Africa and Oceania. Gracilaria is used as a food in Japanese, Hawaiian, and Filipino cuisine. In Japanese cuisine, it is called ogonori or ogo. In thePhilippines, it is called gulaman and used to make gelatin. In Jamaica, it is known as Irish moss.

Main uses :
The primary use of Gracilaria is as a raw material for the production of edible agar, of basic quality. This agar serves as a solidifying agent in the food industry, andmay also be eaten directly. The secondary uses of Gracilaria are as a fresh or dried vegetable, as a component in the cosmetic industry in shampoos, creams, soaps and sunscreens, as well as providing a source for nutraceutical activities , insofar as it is antimicrobial, anti-inflammatory, active against gastrointestinal disease, antiviral, anticancer, anti-pain, etc.

Gracilaria is also used for water remediation in integrative mariculture, wherein Gracilaria absorbs the fish and invertebrate excretions, and enables water recycling in fish cultivation. Gracilaria is also consumed as a food additive in fish culture by utilizing its biological activities, and as fertilizer in agriculture.

Nutritional value:
Gracilaria contains non-digested (agar) and digested (starch) nutritional fibers (up to 50% of dry material), protein with well balanced amino acid composition (up to 20% of dry material), low fat (3%), and other minerals (including magnesium, calcium, potassium, iron, iodine), vitamins (including A, C and B12), and antioxidants (all together about 30% of dry material).

Specifications
- Product name : Dried gracilaria seaweed
- Origin : Indonesia
- Moisture : 13% -16% as request
- Impurities: 1% -3% as request
- Type: whole

Packaging Details:
- Packing : 40-60kgs/ PE bag /PP bag or as customer request,
16-17MTS/20'Feet, 25-26MTS/40'Fee.
- Minimum quality : 1 container 40 feet .
- Payment method : 100 % L/C at sign or T/T (50:50)
- Storages : dry place