Find Verified Steel Strips Suppliers, Manufacturers and Wholesalers

Easy To Apply
Single Pack
Superior Durability
Excellent Gloss Retention

SCOPE
USES
Kisomin Aluminium Paint is a modified Synthetic Resin based enamel.
It provides high Light fastner and brightness with excellent orientation
finish. it has good adhesion on interior or Exterior surfaces.
Recommended as a decorative finish coat & can be applied on
surfaces like Grill, Windows, Cabinets & wide range Metal Structures.

FEATURES/ BENEFITS
* Smooth durable finish.
* Smooth flow & easy to apply.
* Excellent coverage & hiding.
* Superior surface protection

KEY ATTRIBUTES
* Application temperatures : 10-44 degc

VISCOSITY FOR APPLICATION
* For Brushing 40"-45" at 30C
* For Spraying 18" 20" at 30C
* For Roller 55"-60" at 30C

SURFACE PREPARATION
APPLICATION
BRUSH
CONVENTIONAL SPRAY
NOTES :
HEALTH & SAFETY
Steel : Sand the surface with coarse Sand / water paper according to the type of surfaces to remove rust, dust & other foreign particles. System of
Coating should be selected depending upon the type of substrate. Wipe to clean the surface. Apply single coat primer & allow to dry. Re sand the
surface with Sand paper & wipe to clean. Apply 2nd Coat of primer & allow drying for overnight. Before application of paint, thin down to achieve
desired viscosity & filter through white cloth. Apply Kisomin Paint to finish.
Stir the base thoroughly and then mix to uniform consistency.
Apply by diluted material, where viscosity has to be ensure 40-45 sec by f.c. B4
Add Kisomin thinner to adjust viscosity depending on spray condition. Use any standard equipment at an atomizing pressure of 3.5-4.5 kg/cm.
1. Use off the mixed paint .
2. Do not apply when temperature falls below 10c or rises above 50c and when relative humidity rises above 90%. Do not apply during rain, fog or mist
3. Brushes and spray equipment should be cleaned with Thinner,
4. Special care to be taken to close immediately the partly used Diluted Material.
Please refer to the separate Material Safety Data Sheet available with detailed information

Cuplock Vertical is a heavy-duty mild steel scaffolding component designed for construction scaffolding, formwork and temporary support systems. Available in 1 meter, 2 meter and 3 meter lengths. Manufactured for strong load-bearing performance, easy assembly and repeated use at construction sites. Suitable for building construction, bridge projects, industrial structures and infrastructure works. Custom sizes and specifications can be supplied as per project requirements.

Product Description
Greases

Key Specifications/Special Features :
Performance Level:
IS 508 : 1987 (Grade 2) [Reaffirmed 1998]
Consistency of the Worked Grease
at 25C: 265
Drop Point, C: 105
Water Content, % by mass: 1
Graphite Content, % wt.: 7
Copper Strip Corrosion Test @ 75C
for 24 hrs.: Negative

Minimum Order Size and Packaging details :
MOQ - 10 Drums
Packaging Details - Steel Drums (182 KGS)

The 5-in-1 wine opener is a versatile and multifunctional tool that combines five essential features into a single device. Here's a description of each of its functionalities:

Wine Opener: This tool includes a wine opener specifically designed to remove corks from wine bottles effortlessly. It usually features a sturdy corkscrew with a spiral metal shaft and a comfortable handle for a firm grip. With this wine opener, you can open your favorite bottles of wine with ease.

Lighter: In addition to its wine-opening capabilities, this tool also doubles as a lighter. It typically integrates a small butane or gas lighter mechanism that can be ignited by a convenient ignition switch or button. The lighter function allows you to easily light candles, cigars, or any other items that require a flame.

Knife: The 5-in-1 wine opener also incorporates a knife blade for added convenience. The knife is usually foldable and features a sharp stainless steel blade, suitable for various tasks such as cutting foil or opening sealed packages. It provides a practical solution for everyday cutting needs.

Bottle Opener: With a built-in bottle opener, this tool can easily open bottle caps or lids. Whether you want to enjoy a refreshing soda or a non-twist-off beer, the bottle opener function comes in handy. It eliminates the need for carrying a separate bottle opener, making it a convenient tool for parties, picnics, or camping trips.

Screwdriver: The 5-in-1 wine opener also incorporates a screwdriver head, typically in the form of a flathead or Phillips head. This feature allows you to handle various small screwing tasks, such as tightening or loosening screws on household items or gadgets. It serves as a practical tool to have on hand in case of minor repairs or adjustments.

Overall, the 5-in-1 wine opener provides a compact and versatile solution for wine enthusiasts, as well as individuals who appreciate the convenience of having multiple tools in a single device. It combines the functionalities of a wine opener, lighter, knife, bottle opener, and screwdriver into one compact tool, making it a versatile and practical accessory for various occasions.

Performance and Features of GX 1325 CNC Router

• Heavy duty frame structure
• X, Y and axis are driven by AC SERVO motor (JAPAN) which gives more accuracy and speed than our LX Series and RX Series CNC Routers
• High positional accuracy, heavy work load and long life is ensured by HIWIN brand 30 mm square linear guidways.
• Original Italian spindle gives you very stable, trouble-free, maintenance-free performance for long period of time.
• Fast speed and high accuracy ensured by gear transmission equipped on CNC router.
• Periodic lubrication maintenance provided by Automatic Lubrication System which gives long life to mechanical parts.
• If any electronic part gets damaged during running operation, Auto Stop Mode Function stops the machine and so the tool or material doesn't get damaged.
• Axis drives system: X, Y - Rack. Z - Ball Screw.
• Working table is covered with rigid PVC sheet for long life of aluminum T slot table.

Technical specifications

Model : GX - 1325
Outer Dimension : 2161 x 3160 x 1000 mm
Working Area (X, Y, Z) : 1300 x 2500 x 250 mm
Spindle : 6 KW Air Cooled (HSD Italian)
Spindle Speed : 18000 RPM
Maximum Traveling Speed : 30 mtr/min
Cutting Tool Diameter : Ø3 to Ø20 mm
X and Y Axis Traveling : Rack & Pinion (Made in Taiwan)
Table Structure : Heavy Duty Rigid Mild Steel Frame Structure
Repeated Location : 0.020 mm
Operating System : High Speed PCI Base Controller
Driving System : AC Servo Motor (JAPAN)
Weight : 1260 Kg
Power Supply : AC 440V/3PH

Application : Heavy duty application, high speed, like wooden industries, high speed 3D carving, flush door manufacturing, etc.

JP developed Conversion lines for producing bottom folded and sewing woven sack made from a roll of tubular woven PP/HDPE fabric. JPBCL 850 model from J P EXTRUSIONTECH LIMITED is a high-speed machine suitable for conventional bag application and is designed for cutting the tubular fabric, bottom folding, sewing, and stacking. This new generation machine with servo and PLC controls is designed for fabric width up to 850 mm and cut length up to 1400 mm with speeds up to 30 to 40 bags/min. Depending upon the material, width of the fabric, length of the bag, number of folds, stitches etc. This bag making machine is most appropriate for working with un-laminated fabric but can also be converted to use laminated fabric.


Advantages of this conversion Line:

State of the art automated operation & consistent quality of end product (cut & sewn bags.)
Reduced space requirement in finishing department for converting the roll of fabric to the finished bag.
Reduced manpower requirement for producing the same quantity of bags.

Technical Specifications : JPBCL 850

General Parameters

Diameter of Unwinding Cloth 1400 mm Maximum
Width of Unwinding Cloth 300 to 850 mm Maximum
Cutting Length 500 to 1400 mm Adjustable
Cutting Length Accuracy ± 1 mm
Production Capacity 30 40 Bag/Minute (depending upon the bag size).


1st IN-FEED NIP
Driven Motor 0.75 KW AC Motor with Inverter Control
Feeding Type Auto Control, Non-Stop Feeding Type
Tension Contro By Dancing Rollers
2nd CUTTING IN-FEED NIP
Driven Motor 2.25 KW Servo Motor
Feeding Speed Synchronized with Production Settings.
Bag Mouth Auto Opening Bag mouth auto opening arrangement through reversing nip.
CUTTING STATION
Cutting Knife
(Heat Cutting) Flat Type (Straight Line) Special Alloy Steel Cutter.
Cutting Knife
(Cold Cutting) Cutting through Rodless Cylinder.
Heat Cutter Operation Through pneumatic cylinder with sensor

This RFID blocking metal card holder is a high-quality and stylish way to protect your personal information from unauthorized access. The 6 slot capacity is perfect for holding debit cards, credit cards, IDs, and cash. The compact size makes it easy to carry in your back or front pocket, and the sleek design is perfect for both men and women. Ideal for gifting on any occasion, this card holder is a must-have accessory for anyone who values privacy and style.

Protect Your Cards with Our RFID Blocking Metal Card Holder
Sleek Design with Superior Protection. Made with high-quality stainless steel and PU leather, our RFID Blocking Metal Card Holder (Black & Brown) is the perfect solution for anyone who is concerned about the security of their credit and debit cards. This credit card protector case features RFID blocking technology that prevents unwanted RFID scanners from accessing your personal information. With a sleek and stylish design, itâ??s the perfect accessory for both men and women.

Convenient Size and Capacity
Perfect for Your Everyday Needs. Our metal wallet measures just 9.5cm x 6.5cm x 1cm, making it compact and easy to carry in your back or front pocket. It has six slots that are designed to hold your debit cards, ID cards, credit cards, gift cards, business cards, ATM cards, cash, and more. With its durable construction, this RFID blocking card holder will keep your cards safe and secure for years to come.

The Perfect Gift for Any Occasion
Customizable Branding Options Available. Our RFID Blocking Metal Card Holder makes for a thoughtful and practical gift for any occasion. Itâ??s a great choice for Fatherâ??s Day, birthdays, Diwali, Christmas, weddings, anniversaries, and more. With customizable branding options, itâ??s also an excellent choice for corporate gifts, festive gifts, promotional gifts, and more. Trust GiftanaIndia.com to provide you with the best quality products for all your gifting needs.

Rods
They are manufactured from Structural Quality High Tensile Steel Grade 43A to BS 4360. These rods are molecularly bonded with pure EC Grade Copper (99.9%).

Dimensions Rod Size (Dia x Length)
Actual Rod Dia "S"
Thread Dia "T"
Cat No.
9.5 x 1200 (Un-Threaded) 9.5 - HBR-012
9.5 x 1800 (Un-Threaded) 9.5 - HBR-018
14 x 1200 12 14 HBR-1412
14 x 1500 12 14 HBR-1415
14 x 1800 12 14 HBR-1418
14 x 2000 12 14 HBR-1420
14 x 2400 12 14 HBR-1424
5/8 x 4'' OR 16mm x 1200 14.2 5/8" HBR-112
5/8 x 5'' OR 16mm x 1500 14.2 5/8" HBR-115
5/8 x 6'' OR 16mm x 1800 14.2 5/8" HBR-118
5/8 x 8'' OR 16mm x 2400 14.2 5/8" HBR-124
5/8 x 10'' OR 16mm x 3000 14.2 5/8" HBR-130
5/8 x 4'' OR 16mm x 1200 14.2 5/8" HBR-312
5/8 x 5'' OR 16mm x 1500 16 5/8" HBR-315
5/8 x 6'' OR 16mm x 1800 16 5/8" HBR-318
3/4 x 4'' OR 19mm x 1200 17.2 5/8" HBR-212
3/4 x 5'' OR 19mm x 1500 17.2 3/4" HBR-215
3/4 x 6'' OR 19mm x 1800 17.2 3/4" HBR-218
3/4 x 8'' OR 19mm x 2400 17.2 3/4" HBR-224
3/4 x 10'' OR 19mm x 3000 17.2 3/4" HBR-230

Our puttu maker is efficient, consumes less fuel and highly durable in nature. Its flat bottom ensures even distribution of heat, which helps in quick making of puttu. Its unique design includes heat resistant protective handles and cap on the container body.

Features:

Consumes less fuel and highly durable in nature
Flat bottom ensures even distribution of heat, which helps in quick making of puttu
Unique design includes heat resistant protective handles and cap on the container body
Made of High Grade Stainless Steel
Heats Evenly And Cooks Faster

Attractive Shape
Sturdy Body
Hygienic and Odourless
Stainless Steel outer Body
Available in various sizes

Superior quality stainless steel leak proof containers and compact size fits easily in briefcase schoolbag and handbag
Freezer and dishwasher safe
Freezer and dishwasher safe
keeps food fresh for long hours

Superior quality stainless steel leak proof containers and compact size fits easily in briefcase schoolbag and handbag
Freezer and dishwasher safe
Freezer and dishwasher safe
keeps food fresh for long hours

Superior quality stainless steel leak proof containers and compact size fits easily in briefcase schoolbag and handbag
Freezer and dishwasher safe
Freezer and dishwasher safe
keeps food fresh for long hours

Superior quality stainless steel leak proof containers and compact size fits easily in briefcase schoolbag and handbag
Freezer and dishwasher safe
Freezer and dishwasher safe
keeps food fresh for long hours

Superior quality stainless steel leak proof containers and compact size fits easily in briefcase schoolbag and handbag
Freezer and dishwasher safe
Freezer and dishwasher safe
keeps food fresh for long hours

Made out of good quality stainless steel. It is more efficient and gives elegant cooking experience. Easy to use, clean and store . Make delicious puttu and steamed items.Ideal puttu maker makes tubular rice cake from steaming. Water in stored in lower container and the upper tubular container has a fine mess which allows steam to escape upwards without the content flowing down.Ideal Puttu maker is made from completely food grade , free from rusting or cracking / pitting.

Features:

Consumes less fuel and highly durable in nature
Flat bottom ensures even distribution of heat, which helps in quick making of puttu
Unique design includes heat resistant protective handles and cap on the container body
Made of high grade stainless steel
Heats evenly and cooks faster

The casseroles from ideal have an ergonomic design and smooth finish. In addition, these casseroles have a double wall puf coating that helps to keep the content inside warm for a long time. Utility: Ideal's stainless steel casseroles are made from high-quality stainless steel. You can use them to store curries, rice, idlis, rotis, pasta, yogurt and more. They are easy to store and carry as well.

Features:

PUF insulated
Convenient handles to lift the casserole
Sleek and Stylish Design
Anti skid base
Rigid and Light weight and Easy to carry