Armi Solar Panel Coating | Self-Cleaning 3years Durable Coating | Retrofit Maintenance Solution | Graphene Based Non-Flammable Formulation | 500 ML SPRAY PACK
HYDROPHOBIC
SELF CLEANING
MINIMISES SCRATCH
IMPROVES ENERGY EFFICIENCY
COMES IN SPRAYABLE HDPE PACK
your solar panels will stay clean and maintained, offering increased efficiency and power output with high-strength weather protection.
Curing compound is a liquid coating applied to freshly poured concrete surfaces to promote hydration and ensure proper curing. It forms a membrane barrier that retains moisture, allowing the concrete to cure uniformly, minimizing cracking and enhancing strength and durability. The compound also prevents rapid moisture loss and surface evaporation.
Two-component, air drying polyurethane based clear.
Recommended Use :-
This product is recommended Top coat for glossy , uv protection,weather property and also as penetrating primer on bare concrete, wooden substrate prior to application of subsequent coating system.
Physical Data :-
COLOUR : Clear
FINISH : Smooth & Glossy
SOLIDS BY VOLUME : 40 �± 3%
THEORETICAL SPREADING RATE : 16 sq.mt / ltr at a DFT of 25 �µ
FLASH POINT : Base : Above 23�°C Hardener : Above 23�°C
DRYING CHARACTERISTICS (At 65% Relative Humidity & at 30C) : HARD DRY : Overnight FULL CURE : 7 Days
SHELF LIFE : BASE : 6 months HARDENER : 6 months
Surface Preparation
New concrete should be cured for at least 1 month prior to paint application. Ensure concrete surface is absolutely dry and free from moisture, oil, laitance, dust and dirt. For old concrete, ensure surface is free from oil, grease, algal & fungal growth and any old coating. Sand Blasting on concrete gives the best performance and should be given first preference out of the available surface preparation methods. If blasting is impracticable, Acid Etching with diluted Hydrochloric Acid followed by fresh water washing to be adopted. Seasoned wooden articles should be scuffed with Emery 220/400 to achieve smooth surface. Please refer our Directive Sheet on Surface Preparation.
Application Data
MIXING RATIO : Base : Hardener (As per our recommendations)
APPLICATION : By Brush / By Conventional Spray
THINNER : Type 290
POT LIFE : 3 hours min at 30�° C
RECOMMENDED DFT : 30-40 �µ.
OVERCOATING INTERVAL : MIN : 8 hours MAX : Indefinite
COMPATIBILITY : Can be applied on Epoxy primers and oleo-resinous primer and coated / over coated by two component paints like Epoxy, PU, etc.
1. Specialty coating products applicable on all surfaces
2. 0 VOC environmentally Friendly products
3. Extremely high corrosion resistance
4. Single component system - no mixing, no thinner required.
5. No shelf life or Pot life issues
6. Available in all RAL Shades
7. Suitable for application over -40 Deg Cel upto 200 Deg Cel temp range
ROOM TEMPERATURE GALVANIZING COATING (PAINT) GALVART-0723 ( Substitute for Hot Dip Galvanizing Process) Manufacturer, Exporter in India
GALVART-0723 â?? is a green, ZERO VOC, environment friendly formulation, specifically designed for use in aggressive environmental situations. It is an excellent substitute for hot dip galvanization and can be used on ferrous and non-ferrous metals for long term protection against corrosion. Most coatings / paints labelled as Environment friendly ? are Low VOC.
PERFORMANCE FEATURES
1. Excellent Resistance to Corrosion in the most Aggressive Conditions
2. Impermeability to Moisture
3. High Resistance to Aging & Weathering
4. Resistance to UV Radiation
5. Quick drying at Room Temperature
6. Excellent Creep Resistance
BENEFITS
1. Excellent Substitute for Hot Dip Galvanization Process
2. Off Site & On Site Application
3. Easy Touch-up & Recoating
4. Easy Application with Conventional Tools
5. Superior Finish Compared to HDG
6. Cost Effective
7. Available in Various Colour Shades
Acrylic Lacquer coating is a Acrylic based high gloss and scratch proof clear lacuqer coating for applying on cement concrete block, paver block, reflective interlocking glossy block, chequered tiles. they give more coverage area and give more shining with reflective surface.
- We manufacture liquid polishes in various colours to suit different
stones of various colours. Some time we get dull coloured stones from mines. In order to enhance colour, grace and gloss of various coloured stone, this polish is very useful.
The value addition : cost ratio is very high. This means that with low cost of application, the value of stone goes very high. It can also be applied on metal & wooden surfaces .
Stone Xtra Dura Deep Pro is a Polishing Liquid wax formulated by careful selection of waxes to obtain a professional product (it Means much higher life then the
conventional series).
Nano Proseal-TC is a protective sealant transparent water proofing chemical.
NPTC is weather proof sealant chemical. NPTC is light milky liquid, which
turns transparent after curing. NPTC enters into fine pores of surface and seals them. It makes a thin transparent film with 2-3 coats and protects the surface from weather attacks. It Protects your Exterior Elevation from Environmental attacks.
2863 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
