Aqua Interior Primer is applied before paint application on interior walls. The primer helps to hide joints or seams on new dry wall. This primer is mainly recommended for new surfaces as it provides stain-blocking property and consistent base provides a neutral surface to ensure that paint colours show true.
Coverage Area : 53 to 55 Sq.ft*/litre (2 Coats)
Drying time : 30 min (Recoat frequency : 1 hr)
Colours : white/Neutral
Nuvent Aqua Acrylic premium Interior Emulsion paint gives lustrous, rich and vibrant finish. The paint is durable and is a good choice for people looking for glamorous designer interior look. Best results when applied with Aqua interior luxury primer.
Coverage Area : 76 to 79 Sq.ft*/litre (2 Coats)
Drying time : 30 min
Nuvent Red Oxide synthetic primer is formulated for preventing Rust. This primer is used primarily on ferrous metal either Interior/Exterior surfaces in mild corrosive environment.
Coverage Area : 47 to 49 Sq.ft*/litre (2 coats)
Drying time : 40 min (Recoat frequency : 2 hrs)
Budget Interior Primer is applied before paint application on interior walls. The primer helps to hide joints or seams on new dry wall. This primer is mainly recommended for new surfaces because it gives a consistent base and provides a neutral surface to ensure that paint colours show true.
Coverage area : 52 to 54 Sq.ft*/litre (2 Coats)
Drying time : 30 min (Recoat frequency : 1 hr)
Colours : White/Neutral
Nuvent Super pro exterior emulsion offers excellent resistance to rough weather keeping the superior sheen finish. This Emulsion gives cleaner shades which last longer than any other paint. Nuvent Super pro exterior emulsion protects the wall from anti-algae, anti-fungal and prevents growing moss in heavy rain fall areas or in humid climate conditions. Best performance shown used with Super-Pro Primer.
Coverage area : 68 to 70 Sq.ft*/litre (2 Coats)
Drying time : 30 min (Recoat frequency : 1 hr)
Colours : Standard/Customized
2891 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
We are Epoxy flooring manufacturers and Epoxy flooring contractors in India.
Are you looking for Epoxy Flooring Services for your industrial Place in India? Then your search ends here. Tri Polarcon Pvt Ltd, which is a Leading epoxy flooring manufacturer in India and offers a wide range on epoxy flooring services complying with international standards. We supply all kinds of floor services such as epoxy flooring service, industrial epoxy flooring service, epoxy coating service, industrial and commercial applications are doing.
SU-EPO-PRIME 10: is a two pack polyamide-cured epoxy primer containing Zinc Chrome as a corrosion inhibiting pigment. Primer is designed to give outstanding corrosion resistance and adhesion. It cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with epoxy and polyurethane intermediate coats and top coats. Two pack Epoxy-polyamide Zinc Phosphate Red Oxide Primer, direct application on ferrous metals.
2) SU-EPO-PRIME 20: is a two component Epoxy cold cured Zinc Chromate Primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats.
3) SU-EPO-PRIME 30: is a two component Epoxy cold cured Zinc Phosphate primer with outstanding corrosion resistance and adhesion. Primer cures to a hard and tough film with excellent physical and mechanical properties. This product is universally recommended for direct application on Ferrous metals, suitably treated light alloys or galvanized surfaces, after proper surface preparation. Primer can be overcoated with our epoxy and polyurethane intermediate coats and top coats.
4) SU-EPO-PRIME 31: is a two pack Epoxy cold cured Zinc Phosphate primer with high film build outstanding adhesion and corrosion resistance. Primer cures to a hard and tough film with excellent physical and mechanical properties. It is ideal for application in areas where higher thickness is recommended for achieving optimum performance. This product is universally recommended for direct application on mild steel or suitably treated light alloys or galvanized surface, after proper surface preparation.
5) SU-EPO-PRIME 32: is a two pack high solids polyamide cured epoxy resin surface tolerant primer with outstanding corrosion resistance. Primer contains good amount of anticorrosive pigment. It is ideal for application in areas where higher thickness is required for achieving optimum performance. The primer can be over coated with epoxy, chlorinated rubber or polyurethane topcoats. Primer has good adhesion to steel, galvanized steel and non ferrous metals.
6) SU-EPO-PRIME 40: is a two pack epoxy polyamide clear primer, recommended for direct application on concrete & wood substrates.
Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.
RECOMMENDED APPLICATION
Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
SAFFRO'S aura Premium Gloss Enamel gives smooth,hard & glossy finish.Its dry film has good adhesion to the surface.It has very good flow and brushability. aura Premium Gloss Enamel is a highly washable paint, thus you can wipe off most common household stains easily
RECOMMENDED USE It is applied on furnitures,drums,barrels,household products,elecrical
motors,doors,windows and variety of other surfaces which are not
subjected to outdoor exposure
FINISH :smooth and glossy
COLOR As per shade card Including White and Black.
COVERING CAPACITY :7 to 9 sq.mt/lit/coat at 30 to 35 micron dry film thickness,depending
(ON SMOOTH MILD STEEL SURFACE) upon shades and surface.
DRYING TIME :Surface dry - Less than 3 hours.
:Hard dry - Less than 15 hours.
Second coat application period -After 10 hours
Above all properties depend upon temperature and humidity.
FLASH POINT :Above 30* C (86 *F)
THINNER RECOMMENDED :SAFFRO Synthetic G.P Thinner
METHOD OF APPLICATION :By Brush or spray at a pressure of 40 to 50 P.S.I
RECOMMENDED PRIMER :For Metal - SAFFRO R/O Z/C metal primer
- SAFFRO Zinc Chrome primer yellow
For Wood - SAFFRO Wood primer white
For Plaster - SAFFRO Cement primer (oil base)
DIRECTION FOR USE Remove dust,grease,oil,moisture,rust and other loose flakes etc.After
priming the surface with recommenden primer with over night drying &
sanding with emery paper,apply SAFFRO SHINE synthetic enamel using
recommended thinner.Allow first coat to dry for minimum 10 hours before
applying second coat.Stir the content thoroughly prior to use
No. Type SILK Interior Emulsion provides a luxurious finish and a silky glowing appearance to the wall.
1 FEATURES SILK Interior Emulsion is water based, Economical interior emulsion for distinctly rich and smooth finish as compared to distemper. Ideal combination of pigments & extenders mixed in a co-polymer emulsion for smooth and pleasant matt finish with Good washability.
2 RECOMMENDED APPLICATION SILK Interior Emulsion is an interior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White & other shades as per shade cards
1. FINISH Smooth and matt
2. COVERAGE On smooth primer masonry surface by brushing
1 coat: 140-160 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS Silky smooth sheen
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
BUILDER COAT Acrylic Interior | Exterior emulsion is matt finish.
FEATURES :-
BUILDERCOAT Acrylic INTERIOR | EXTERIOR emulsion provides a smooth long lasting rich finish to the INTERIOR & EXTERIOR wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
RECOMMENDED USE :-
BUILDERCOAT Acrylic INTERIOR / EXTERIOR emulsion is INTERIOR / EXTERIOR wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA :-
COLOURS : White & other shades
FINISH : Smooth and Matt
COVERAGE : On smooth primer masonry surface by brushing
1 coat: 130-160 sq. ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc)
DRYING TIME : Surface drying time â?? 10-15 minutes
GLOSS LEVELS/SHEEN LEVELS : Matt
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 18 months from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
ULTRA PREMIUM weatherproof interior and exterior emulsion is a smooth, water-based, modified acrylic, interior and exterior wall finish with silicon additives.
FEATURES :-
ULTRA PREMIUM weatherproof interior and exterior emulsion is specially formulated to withstand extreme tropical conditions of rainfall, humidity and heat
ULTRA PREMIUM provides excellent resistance from growth of algae and fungi on the walls. This prevents appearance of black spots due to algal growth.
ULTRA PREMIUM provides extremely good protection against alkali and UV degradation, thus ensuring that the shade doesnâ??t fade for a long time and the paint lasts longer.
RECOMMENDED USE :-
ULTRA PREMIUM Acrylic interior and exterior emulsion is interior and exterior wall finish that can be applied on all type of smooth plaster, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA :-
COLOURS : White & other shades
FINISH : Smooth and soft sheen
COVERAGE : On smooth primer masonry surface by brushing
1 coat: 140-170 sq. ft/ltr
2 coats: 85-95 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc)
DRYING TIME : Surface drying time â?? 30 minutes
GLOSS LEVELS/SHEEN LEVELS : Silky smooth with soft sheen
FLASH POINT (IS101/108 Part 1, Sec 9) : Non- flammable
SUITABILITY OF THINNER PAINT Use within 24 hrs.
SHELF LIFE 18 month from date of manufacture in original tightly closed containers kept away from direct sunlight and excessive heat.
PERFORMANCE DATA :-
ABRASION RESISTANCE : Excellent
WATER RESISTANCE : Excellent
REMARKS : 1) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire.
2) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water.
3) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention.
4) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling the paint-this is required for all paints.
5) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system.
6) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application.
7) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use.
8) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Pure Acrylic Emulsion with high sheen.
1 FEATURES It provides a smooth long lasting rich finish with high sheen to the interior and exterior wall. It is washable and most stain can be removed easily by sponging with mild soap solution. The paint film is having good resistance to fungus and mildew.
2 RECOMMENDED APPLICATION STAR valvet glow emulsion is an interior and exterior wall finish that can be applied on all type of smooth plaster, false ceiling, asbestos sheets, concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White & other shades as per shade cards
1. FINISH Smooth and high sheen
2. COVERAGE On smooth primer masonry surface by brushing
1 coat: 140-160 sq.ft/ltr
2 coats: 80-90 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS Silky smooth with high sheen
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 3 years from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
No ABRASION RESISTANCE Excellent
1. WATER RESISTANCE Excellent
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins STAR velvet glow emulsion which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
No. Type Nano acrylic Interior Wall Primer (Water Thinnable) is an economy water-based primer that enhances the application and finish of interior topcoats.
1 FEATURES Nano Acrylic Cement Primer is water based, Economical interior primer with good whiteness,good coverage and flow and leveling properties.
2 RECOMMENDED APPLICATION Nano Acrylic interior wall primer that can be suitable for priming plastered wall,asbestose,cement concrete etc.
PRODUCT TECHNICAL DATA
No COLOURS White
1. FINISH Smooth and matt
2. COVERAGE 1 coat: 90-100 sq.ft/ltr
2 coats: 60-70 sq.ft/ltr
(It may vary due to factors such as methods and conditions during application and surface roughness etc.)
3. DRYING TIME Surface drying time â?? 10-15 minutes
4. GLOSS LEVELS/SHEEN LEVELS NA
5. FLASH POINT (IS101/108 Part 1, Sec 9) Non- flammable
6. SUITABILITY OF THINNER PAINT Use within 24 hrs.
7. SHELF LIFE 12 Month from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat.
PERFORMANCE DATA
2. REMARKS a) Kindly refer to the MSDS for the saffro mellow coatings & resins Nano Acrylic Cement Primer which gives detailed information on Safety measures while handling the paint. b) Store the product at ambient conditions in well ventilate locations and away from the source of ignition and fire. c) Avoid eye and skin contact. In case of eye and skin contacts wash with plenty of clean water. d) Do not inhale or inject. In case of inhalation move to fresh air and seek medical attention. e) Use protective equipments like rubber/polythene gloves, safety goggle/glasses, face mask while handling. f) In humid areas, use of a bio-wash solution is recommended to remove surface fungus growth, fungal spores, mould etc. before application of the paint system. g) Do not apply when ambient temperature is less than 10�ºC or if the temperature might drop to this level within 4 hrs of application. h) Tinted paints need thorough shaking/mixing immediately after tinter addition as well as before use. i) For removing stains, sponge clean with a mild soap solution and wipe clean. Ensure drying time of 1 Week before cleaning.
SAFFRO MELLOW COATINGS & RESINS MELLOWTEX RUSTIC/DHOLPURI/BUBBELS is a textured finish composed of high quality durable acrylic modified resin specially designed as an intermediate coating. RUSTIC imparts a super premium look to the walls.
BENIFITS :-
Hides Fine Cracks
It hides surface undulations and fine cracks.
Tough Textured
The tough texture finish lasts for long and ensures low maintenance.
Plaster Protection
It increases the life of plaster by protecting it from wind driven rain.
UV Resistance
It has excellent UV resistance and adhesion.
Anti-algal Formula
It resists fungal and algal growth when applied as system, with the recommended top coat.
Technical Information :-
Drying time: Surface dry time 30 - 60 min.
Flash point IS101/1987 Part 1, Sec 6: NA.
Coverage :-
Pre-painting Steps
Plaster New masonary surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonary surfaces.
Cleaning
Surface should be free from any loose paint, dust or grease. Growths of fungus, algae or moss should be removed by wire brushing and water. When the underlying surface exhibits chalkiness, in spite of thorough surface cleaning, use Saffroâ??s Exterior Primer.
How To Apply :-
On normal masonary surface by a trowel spatula to obtain an even coating of 1 to 1.5 mm ,2 coats 2 to 2.5 sq.ft/kg**
(**Actual coverage may very from the quoted coverage due to factors such as method and condition of application and surface roughness and porosity.)
Filling For Holes & Dents :-
In case of dents and holes use Saffro Mellow Coatings & Resins SUMO Acrylic Wall Putty or white cement and fine sand in the ratio 1:3.
Saffro Mellow Coatings & Resins,MELLOW TEX RUSTIC should not be applied on surfaces / substrates that are subjected to continuous seepage or dampness.
2891 Paints Coatings Suppliers
Short on time? Let Paints Coatings sellers contact you.
