* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* Screwed, socket-weld and flanged ends
* ASME classes up to 2500
* Variety of actuation option
9627 Nickel Balls Suppliers
Short on time? Let Nickel Balls sellers contact you.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.
Being one of the reputed organizations in the market, we are engaged in providing an exclusive range of Light Weight Tennis Ball.
Features:
Excellent grip
Leak proof
High durable
Specifications and uses:
Green in color
Fine woolen cloth used
Weight: 80-85 gm
Light weight quality
Comes in packing of 3 in a pack
Prices are for per dozen
Fine bounce and with attractive logo
High quality chemical used to increase the strength of the ball
Very soft and handy and can be used for different playing purposes
Designed specially to comfort any age group individual
Amino Humic Shiny Balls (Dark Gold) are used to improve soil structure. It is specially made round granules for soil application. It is combination of Amino Acid, Humic Acid, Fulvic Acid, Potash, etc. Research and study shows that this product can increase crop yield by 10-20% can be used in any crops..
For price, specifications and other details please contact us.
We offer a range of products to electroplating industries for quality copper plating, products in various shapes in different grades i.e. Phosphorised, Oxygen free & ETP. As Per Customer Requirement.
Alumina Oxide ceramic balls may be used at temperatures up to 3180 'F. Ceramic balls are extremely hard, resistant to abrasion, and immune to all furnace atmospheres. Applications, where alumina oxide balls are used, include chemical pumps, down-hole pumps, valves, bearings, gauges, flowmeters, etc.
