Applications : Paper And pulp industries, Petrochemical industries, Dyeing industries
Seal Faces : Sic, Sic/Ceramic, TC
Secondary Seals : Viton, PTFE, GFT, Karlez
Metal Components : SS-316, Hast-C, Monel
Shaft Diameter : 25 to 150mm
Pressure : Up to 45 Bars
Speed : Up to 25 m/s
Temperature : -50 to 160 Degree C
With vast industrial experience, we are involved in offering a wide range of Stationary Mounted Cartridge Seal
Face Materials :Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Metal Parts : SS 316, SS 304, Hast-C, Alloy 20, Monel
Pressure : Vacuum 8 bar(max)
Speed : 120.0 rpm
Temperature : Amb to +250 dig C
Shaft diameter : 25mm-150mm
Elastomers : NBR, Viton, EPDM, FFKM, PTFE
Introduction:
Mechanical Seals generate heat and require lubrication while face sealing. Different API
Plans are used to dissipate this generated heat and cool the seal faces thus extending the seal life.
Flushing is required to cool and lubricate the seal. Controlling Flush Fluid Temperature is critical to the life of a mechanical seal. Cooling of the product also may be needed to improve the margin to vapour formation, to meet secondary sealing element temperature limits, to reduce coking or polymerizing, or to improve lubricity (as in hot water).
Disadvantage:
The basic disadvantages with water-based heat exchangers are the formation of scale around the tube due to fouling. Fouling can be very costly in refinery and petrochemical plants since it increases fuel usage, results in interrupted operation and production losses, and increases maintenance costs
Solution:
It has been often recommended to use the Air Cooler to get rid of the above problem but the size and the cooling efficiency of the so far developed air cooler had put them on the back foot and are rarely used for the cooling of the mechanical seals.
.
Expert Engineering has developed a new Enhanced Air Finned Cooler for such difficult applications, where no water is used. The compact size with natural draft cooling maintains the requirement of the cooling.
Capacity - 7.5 litre
Design Pressure - 10 bar
Level Gauge - To indicate barrier fluid
Manual Feed- Pump 2 ltrs (optional)
Hydraulic Test Pressure - 15 bar
Working Temprature - 180 dig C
Thermosyphon Shell Material Carbon Steel,SS 316,SS 304
Cooling Coil material - SS 316,SS 304
Heat Transfer Area Of Cooling Coil - 0.266m2
Cooling Water Flow Rate Recommended - 10 litre/min
Secondary Seals - Elastomers
Pressure Guage - 0-10, 0-25, 0-40 bar
* This is used for double mechanical seals in tandem or back to back arrangement to provide necessary lubrication and cooling to the seal faces to achive recommended seat life and comes equipped with cooling coil inside the shell to bring down the temperature of barrier fluid coming from seat to thermosyphon.
Elastomers : NBR, Viton, EPDM, FFKM
Metal Parts : SS 316, SS 304, Hast-C, Duplex
Face Materials Silicon Carbide,Tungsten Carbide, Carbon, Ceramic
Velocity : V 20 m/sec.
Shaft diameter : 18mm-100 mm
Temperature : -50 dig C to +220 dig C
Pressure : P 50bar(max)
Application : Water, waste water & hot water, Chemical Industry, Oil Applications, Food industry, Pulp & Paper
We have gained a remarkable position in the market that is involved in offering Wave Spring Seals Balanced.
Shaft Dia : 25 to 100mm
Pressure : Up to 1.40 MPa
Speed : Up to 1 m/s
Metal Components SS-316
Seal Faces : Carbon Vs Ceramic/Sic./TC
Secondary Seals : Nitrile/ Neoprene/Viton/PTFE
Temperature : -50 to 150 Degree C
Being a quality oriented organization, we are involved in providing a supreme quality range of Dry Running Seal.
Face Materials Silicon Carbide,Tungsten Carbide,Carbon, Ceramic
Metal Parts SS 316, SS 304, Hast-C, Alloy 20
Elastomers NBR, Viton, EPDM, FFKM, PTFE
Speed 320.0 rpm
Shaft diameter 25mm-150mm
Pressure Vacuum 8 bar(max)
Temperature Amb to +250 dig C
Applications : Corrosive application, General light chemicals, Food products
In order to keep pace with never ending demands of the customers, our company is instrumental in offering Single Agitator Seals.
Metal Parts : SS 316, SS 304, Hast-C, Alloy 20
Elastomers : NBR, Viton, EPDM, FFKM, PTFE
Face Materials Carbon, Silicon Carbide, Ceramic, Tungsten Carbide
Temperature : Amb To +250 dig C
Pressure : Vacuum 35 bar(max)
Applications : General chemicals Et its vapours, Light hydrocarbons Et its vapours
Shaft Diameter : 25 - 150mm
Speed : 600 rpm
Due to our enormous understanding and massive knowledge of this business, we are involved in offering Double Agitator Seals.
Metal Components - SS-316 / SS-304
Secondary Seals - Viton / PTFE /GFT
Seal Faces -Ceramic,Sic,Carbon Vs. Ceramic RB Sic,TC
Shaft Dia - 25 to 150mm
Pressure - Up to 15 Bars
Speed - Up to 25 m/s
We are a unique name in this industry to provide our prestigious clients an exclusive range of Stationary Mounted Dual Seal.
Pressure : Upto 2 MPa / 20 Bar (g) max
Shaft Diameter : d:1 18.0, 100.0 mm
Temperature : -40 Degree C + 176 Degree C
Speed : Upto 4500 fpm/ 23 m/s
Metal Parts : Alloy C-276
Material : Steel
Application : Automobile Industry
Shaft Diameter : 10.0, 80.0 mm
Pressure : 10 Bar (max)
Temperature : 20 to 140 Degree Celsius
Metal Parts : SS 306, SS 304
Velocity : 15 m/s
Speed - 25 m/sec
Style - Mechanical Seal
Pressure - 40 bar (max)
With our in-depth knowledge of this domain, we are actively engaged in offering an excellent quality assortment of High Pressure Slurry Seal.
Other Details:
The high pressure slurry seals we offer are specially designed to handle highly corrosive and abrasive media. Such high pressure seal find its applications in petrochemicals, sugar, paper & pulp industries. Made from quality raw material it offers efficiency in various application areas.
Material - Steel
Use - As a barrier for materials in the pump and outside atmosphere
Pressure - Max 40 bar
Other Details:
The Compressor Seal complies with international quality standards.
The precision in construction helps in assuring zero leakage at the application area.
They are compatible with compressors of brand Accel, Alfa Laval, Batiboi, Bitzer, Carrier, Copland, Daikini, Grasso,
Ingerssoll Rand, Kirloskar, Mycom, Sabroe, Trane, Voltas, York, BOCK, MCQUAY, Gram and Vilter.
