Ritver Wood bleaching compounds, is a two-part bleach, used to lighten wood, remove stains and discoloration, and prepare wood for finishing. They are particularly effective at removing rust, water marks, and dark tones from wood, restoring its natural beauty. The process involves applying the bleach to bare wood, allowing it to penetrate, and then neutralizing the acid with a baking soda or borax wash to counteract the bleaching action.
It is used for all wood-working applications such as in furniture industry, plywood industry, paper and paper products, handicrafts and textile industry. 4 to 5 hours setting time compared with 8 to 10 hours. Extra PVA Emulsion for strong bonding, High density and Quick setting ability.
Ritver Wood Glue is water-based adhesive, based on polyvinyl acetate homopolymer, with excellent high
tack and bond strength, developed for various wood applications, such as carpentry uses. Inc of bonding
timber, MDF, Doors, Windows, in high-speed assembly lines at joineries. It is also useful for decorative to
ply, block boards, tiles in dry condition. etc., The wood glue is not suitable for perpetual wet areas like
toilets, kitchen sink etc.,
Virtues: It is a nontoxic and nonflammable water-based, environmental friendly single component
This MR-2 product is siiler to the FEVICOL MARINE grade. and
MR-2 product is water proof*.
MR-2
Strong water resistance
High Solids
High initial Tack
Fast Setting Time
Heat & Fungal Resistance
Better Penetration in Wood
MR-2 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
For bonding Plywood/ MDF /Particle board etc with each other & also bonding with Laminate/Veneer etc.
For Edge Bonding, Finger Jointing and Wooden Flooring
(where water seepage is not present)
Suitable for Vertical/Horizontal applications.
Excellent spreadability for better coverage.
Non Hazardous / non inflammable and free from harmful solvents.
Prolonged shelf life without affecting the quality on storage.
Economical in long run.
Special preservative used to protect adhesive from any bacterial growth during storage.
Single component adhesive.
Regular is the grade which is similer to the BULBOND WK.
which is lower grade for carpenter use.
which is also a cost effective grade for low cost working.
Faster Bonding- Time saving leading to increased productivity & faster completion of project
Heat and fungal resistant
PR-1 is widely used for all Types of Wood, Cold Press/Hot Press and Post forming applications.
For bonding Plywood/MDF/Particle board etc with each other & also bonding with Laminate/Veneer etc.
For Edge Bonding, Finger Jointing and Wooden Flooring where water seepage is not present.
Powerful Bond strength. Suitable for Vertical/ Horizontal applications.
Excellent spreadability for better coverage.
A multipurpose premium grade adhesive specially used for heavy duty bonding & required
high strength. It forms strong permanent contact bonds. Adhesive can be used where very less pressure
is required for bonding. It is specially used for Furniture work mostly sun mica, plywood & partical board
etc.PVC sheet, PU foam, leather cloth, leather, polyester glass fibers, hard board, chip board, wood,
painted metal, automotive & coach building ,roof head lining.
Hotmelt Adhesive - carton closing , Paper bags handle making
Versatile EVA based hotmelt for variety of substrates in End of line Packaging.
Product Features
- Suitable to paper to paper/Laminated substrate/Aqueous Varnished Surface
- Can be used for Warp around Case Sealing application
- Good hot tack with fast setting product
- Clean cut-off from the nozzle
- Good Thermal Stability
Technical Specification
Appearance: Light Yellow
Form: Chiklets
Melt Viscosity at 150 C by 1800- 3500 cps Brookfield Thermoset
Softening Point: 95 ±5 (by Ring and Ball method) TYPE
"Hotmelt Adhesive - carton closing - Non Laminated Cartons"
EVA based low viscous hotmelt for Carton Sealing.
Product Features
- Suitable to paper-to-paper substrate either in grey board, white board, non-varnished surface
- Mostly used in mono carton flap sealing
- Fast setting product
- Good Thermal Stability
Technical Specification
Appearance: Light Yellow
Form: Chiklets
Melt Viscosity at 150 C by 800 1600 cps Brookfield Thermoset
Softening Point 105 ±5 (by Ring and Ball method) TYPE
Manual Binding - all types of paper to paper and Machine application
A water-based product used for a wide variety of packaging applications.
Product Features
- High green bond
- High Stiffness
- Low penetration on Highly absorbing surfaces
Technical Specification
Appearance: Visual Milky white emulsion
Viscosity (Poise): @30C by Brookfield RVT at 20 RPM 175-250
Solids (%): @105C for 90 minutes 30-34
Water-based adhesive with high coverage. It is suitable for liner fixing, window pasting and Flap Sealing of Mono cartons.
Product Features
Very high green strength
Best for lamination and varnished carton
Good heat resistance for hot filling applications
High coverage
High bond strength
Product fit for Casing-in application
Technical Specification
Appearance: Visual Milky White Emulsion
Viscosity (Poise) @30 C by Brookfield RVT at 20 RPM 25-40
Solids (%) @105 C for 90 minutes 55-59
868 Glues Adhesives Suppliers
Short on time? Let Glues Adhesives sellers contact you.
