Find Verified Electronics Communications Suppliers, Manufacturers and Wholesalers

FTTH Drop cable

Application :-
The XLPE (Cross Link Poly Ethylene) Power Cables are used under ground as well as over head transmission of power
in power plants, industries, projects and all other electrical installations.

Features :-
Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated
with XLPE compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The outer
sheaths can be PVC, HR PVC, FRLS or FR depending upon the application and requirement.

Technical Advantage of XLPE Insulation :-
Higher current rating, higher short circuit rating (approx 1.2 times that of PVC), thermosetting in nature, higher
insulation resistance (1000 times more than PVC cables), higher moisture resistance, better resistance to surge
currents, low dielectric losses, better resistance to chemicals and corrosion, longer service life. Comparatively higher
cable operating temperature 90�°C and short circuit temperature 250�°C.

Technical Data :-
Working Voltage : Up to 1100 V
Temperature Range : -15�°C to +90�°C
Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3
Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores.
Color Codes : 2 Core Cables - Red, Black
3 Core Cables - Red, Yellow & Blue
3 Core Cables - Red, Yellow, Blue & Black (for Neutral)
4 Core Cables - Red, Yellow, Blue & Black
5 Core Cables - Red, Yellow, Blue, Black & Grey
6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction

in each lay Black outer sheath

Specification : IS:7098 (Part-1)
Packing : 500 / 1000 meters on drums

Application :-
The Power Cables are used under ground as well as over head transmission of power in power plants, industries,
projects and all other electrical installations.

Features :-
Manufactured from bright annealed 99.97% pure bare copper & aluminum conductors. These cables are insulated
with PVC compound. Taped/Extruded inner sheath. Round steel wire / flat galvanised steel grip armoured. The inner &
outer sheaths can be PVC, HR PVC, FRLS, HR-FRLS or FR depending upon the application and requirement.

Technical Data :-
Working Voltage : Up to 1100 V
Temperature Range : -15�°C to +70�°C or +85�°C in HR PVC
Power Cable Sizes : 1.50 Sq. mm to 400.00 Sq. mm in 2, 3, 3 & 4 core.
Copper Control Cable Sizes : 1.50 Sq. mm, 2.50 Sq. mm up to 24 cores.
Color Codes : 2 Core Cables - Red, Black
3 Core Cables - Red, Yellow & Blue
3 Core Cables - Red, Yellow, Blue & Black (for Neutral)
4 Core Cables - Red, Yellow, Blue & Black
5 Core Cables - Red, Yellow, Blue, Black & Grey
6 Core Cables & above - Adjacent cores are blue for reference and yellow for direction

in each lay Black outer sheath

Specification : IS:1554 (Part-1)
Packing : 500 / 1000 meters on drums

MGA-504 0.5-L Jar Stainless Steel Jar.

Capacity: 0.5 L
Transparent dome
Stainless steel jars and blade
Country of Origin: India
Capacity: 1 liter
Machine ground and polished blades for quick grinding
High grade nylon couplers for smooth trouble free usage

The function of a capacitor in a fan is to store electrostatic energy in an electric field and where possible, to supply this energy to the circuit. The role of a capacitor in a fan is to prevent a dangerous failure of the circuit, they allow the AC to move but block the flow of DC.
A condenser, also known as a capacitor, is used in a fan to help regulate the electrical current flowing through the mot.
The function of the condenser in a refrigeration system is to transfer heat from the refrigerant to another medium, such as air and/or water. By rejecting heat, the gaseous refrigerant condenses to liquid inside the condenser.
A condenser is an essential component within any HVAC system. Its purpose is to take in high-pressure refrigerant gas, emitted by the compressor, and convert it into liquid state. The refrigerant is cooled and then condenses at a virtually constant temperature and pressure.
A capacitor can help a fan motor to run at a higher speed by helping to regulate the current flowing through the motor. A capacitor is connected to the start winding in a Fan. In low power induction motor like fan it is left connected permanently, so as the capacitor ages speed of Fan reduces.

MGA-513 STEEL (WET& DRY) 1.5 LITRE

Colour: Multicolour
Product Dimensions: 17D x 15W x 19H Centimeters
Blade Material: Stainless Steel
Special Feature: Built In Grinder
Capacity: 1.5 litres
Model Name: MGA 513.

Size: 1.50 Liter
Original Preethi Stainless Steel Large Jar
package include 1pc
Size Name: Standard; Color Name: Steel And Transparent

MGA-509 STEEL (WET& DRY) 1 LITRE

Size: 1L
Stainless steel large jar
Polycarbonate lid included
Blade assembly included
Works with eco twin, eco plus, eco chef blue leaf platinum

High Air Delivery Equipped with a Powerful Motor.
It Also Works Efficiently Even at Low Voltage.
High-Lift Angle Blade Helps in Spreading the Air all Over the Room.
Smooth Operation Fitted with V2 Grade Ball Bearings, this Ceiling Fan Offers you Noiseless Operation & Durability.

Available :- 900MM, 1200MM, 1400MM. (White & Brown).

Available Sizes :- 200mm & 250mm

Keep your kitchen and bathrooms fresh and odour-free with the Electric Ventilator Dx Exhaust Fan.
With a 200 mm sweep size, this exhaust fan is specially designed for proper ventilation.
Designed from resin, the body and blades promise hassle-free maintenance.

And, its five blades ensure high speeds to deliver optimal performance.
In addition, this exhaust fan's shutter prevents dust and dirt from entering.
Sporting an elegant design, it lends any decor a hint of modern style.

Mobile Light Tower - 400w x4 led light- 5kva Generator - 9mtrs High Mast- Manual Winch- Mounted on 2 wheel Trolley

Product Details :
The Transformer used in the power supply unit is manufactured as per the UL norms.
The transformer will be potted/sealed in an enclosure using Epoxy (a mixture of Resin & Hardener) which ensures high reliability and efficiency.
The enclosure is made up of Prime Stainless Steel material SS 304 grade (also carbon steel with powder coated enclosure can be provided on request )
Block Terminals will provide the easiest way for the customer to connect the secondary tappings.
Photocell and timer connected as per the customer's needs a circuit breaker of 25A is provided for circuit protection.

Technical Details :
Wattage - 75w to 1200w
Frequency - 50/60 Hz
Pry. voltage - 120V /277V
Sec... voltages as per customer requirements
Insulation class F, H
Max. regulation 10%
Dielectric 2000v, primary to secondary for 1 second.
Dielectric 2000v, all windings to lamination for 1 second.

Product Details :

The Transformer used in the power supply unit is manufactured as per the UL norms.
The transformer will be potted/sealed in an enclosure using Epoxy (a mixture of Resin Hardener) which ensures high reliability and efficiency.

The enclosure is made up of Prime Stainless Steel material SS 304 grade (also carbon steel with powder coated enclosure can be provided on request )

Block Terminals will provide the easiest way for the customer to connect the secondary tappings. Photocell and timer connected as per the customer's needs.

A circuit breaker of 25A is provided for circuit protection.
Technical Details
Wattage - 300w
Frequency - 50/60 Hz
Pry. voltage - 120V /277V
Sec... voltages As per customer requirements
Insulation class F, H
Max. regulation 10%
Dielectric 2000v, primary to secondary for 1 second.
Dielectric 2000v, all windings to lamination for 1 second.

Toroidal Transformers, by meeting today's requirements for smaller, more efficient, quieter and safer products, are being accepted in an increasing range of electronic and electrical equipment With toroidal transformer smaller dimensions, lighter weight and low stray magnetic fields , you can build more compact, lower cost quality products without sacrificing performance.

Toroidal has a round shape with no air gaps, and with the primary and secondary windings uniformly distributed around the core, locks in\" the magnetic field and makes the toroidal transformer very quiet and efficient. Toroidal transformers are built around a ring-shaped core, which, depending on operating frequency, is made from a long strip of silicon steel or permalloy wound into a coil, powdered iron, or ferrite core.

We make wide range of Toroids based on customer specifications. We provide center potted, plate mounted, clamp mounted and many other types of Toroids on customer specifications.

Features
High precision winding with Jovil and Ruff machines.
High quality M4 27 CRGO core used
Class H+ 200 Deg C Dual coat Enameled copper wires used
UL approved
Center potting provided for better cooling and fixing
Tailor made according to customer specs
TYCO, PANDUIT and MOLEX connectors and crimps used for UL approved models
Custom made parts are designed and developed to meet specific requirements.

Standards
We follow Indian and UL standards.
We can provide UL 5085-1 and 5085-2
We can make our product compatible with all international standards

Applications
Used medical and audio equipment
Used in voltage stabilizers
Used in electronics circuits
Used in power supply units
Used in variacs
Used in high precision equipment

Product Details
The Transformer used in the power supply unit manufactured as per the UL norms.
Transformer will be potted/sealed in an enclosure using Epoxy (mixture of Resin & Hardener) which ensures high reliability and efficiency.
The enclosure is made up of Prime Stainless Steel material SS 304 grade (also carbon steel with powder coated enclosure can be provided on request )
Circuit breaker(25A x 3) provided for circuit protection.
Block Terminals will provide the easiest way for the customer to connect the secondary tappings.
Photocell and timer connected as per the customer needs
Technical Details
Wattage - 900w
Frequency - 50/60 Hz
Pry. voltage - 120V /277V
Sec... voltages As per customer requirements
Insulation class F, H
Max. regulation 7.5%
Dielectric 2000v, primary to secondary for 1 second.
Dielectric 2000v, all windings to lamination for 1 second.

Product Details
The Transformer used in the power supply unit manufactured as per the UL norms.
Transformer will be potted/sealed in an enclosure using Epoxy (mixture of Resin & Hardener) which ensures high reliability and efficiency.
The enclosure is made up of Prime Stainless Steel material SS 304 grade (also carbon steel with powder coated enclosure can be provided on request )
Circuit breaker(25A x2) provided for circuit protection.
Block Terminals will provide the easiest way for the customer to connect the secondary tappings.
Photocell and timer connected as per the customer needs
Technical Details
Wattage - 600w
Frequency - 50/60 Hz
Pry. voltage - 120V /277V
Sec... voltages 12, 13, 14, 15V
Insulation class F, H
Max. regulation 10%
Dielectric 2000v, primary to secondary for 1 second.
Dielectric 2000v, all windings to lamination for 1 second.

A pure sinewave inverter (HUPS) is the combination of two innovative technologies - eliminating the need for separate Power Backup systems for sophisticated home appliances, computers, LED televisions, music systems, and all other electronic devices. Home UPS systems are equipped with Advanced DSP Technology to monitor and control hardware modules in real-time. Power loss can be detected automatically through this intelligence.

Home UPS system and the system switches to backup mode to provide pure sine wave output that is 100% clean, regulated, totally stable, distortion-free and is totally safe to use with sensitive appliances.

A built-in AC MCB provides input mains protection, and the system charges the battery in three stages: boost, absorption, and float for optimum charging. Special features are zero Switch Over Time in UPS mode, ABS Automatic Bypass System, 20KHzfrequency design that ensures Tranquillity, and A high crest factor of 3:1 enables to run of loads that require a high starting current, and compliance with Global standards.

Description
Multi Tap Transformers allow greater flexibility in managing multiple wire runs by moving cables up and down the multi range. Our Resin Sealed Transformers ensure highest possible efficiency & reliability.

Features
Low Voltage Transformer ranging from 75 W - 1200W 120, 277 /12, 13, 14, 15V with Toroidal /EI.
50/60 Hz
Protection for each output circuit.
Photo cell Option
Rainproof Enclosure
Stainless Steel / Powder Coated.

Product Details
The Transformer used in the power supply unit manufactured as per the UL norms.
Transformer will be potted/sealed in an enclosure using Epoxy (mixture of Resin & Hardener) which ensures high reliability and efficiency.
The enclosure is made up of Prime Stainless Steel material SS 304 grade (also carbon steel with powder coated enclosure can be provided on request )
Circuit breaker(25A x 4) provided for circuit protection.
Block Terminals will provide the easiest way for the customer to connect the secondary tappings.
Photocell and timer connected as per the customer needs
Technical Details
Wattage - 1200w
Frequency - 50/60 Hz
Pry. voltage - 120V
Sec... voltages As per customer requirements
Insulation class F, H
Max. regulation 7.5%
Dielectric 2000v, primary to secondary for 1 second.
Dielectric2000v, all windings to lamination for 1 second.

Control transformers are mostly used for industrial applications where electromagnetic devices are used such as solenoids, contactors and relays. Also control transformers can be utilized in industrial electrical applications for regulating voltages through electrical and electronic circuits.

We make wide range of control transformers with E-I Lamination core and with various termination styles to suit for customer applications either single phase or Two phase or Three phase as per customer requirements . We provide termination with lead wires, terminal blocks, Din rails, solder points, screws, and terminal connectors. We can provide EI transformers up to 10kVA. We can provide with electrostatic shields, Thermal protector switches and circuit breakers.

Features
Insulation Class as per UL/IS (A,B,F,H)
C and L clamps are provided according to specifications.
High quality Terminal blocks are provided.
High quality XLPE leads wires used.
Low loss EI stampings used for high efficiency.
High quality hardware used.
Glass filled Nylon Bobbins used.
Flame retardant insulation tapes used inside.
High quality insulation used.
Fiber glass sleeves used for external wires.
Compact in space
Cost effective
Particularly well suited for resin cast
Less in weight
UL Approved

Standards
We follow IS11171.
Compatible to IEC61558-1
We can provide UL 5085-1 and UL 5085-2

Applications
Used in converters, inverters, instruments and power supplies.
Used in many types of machines and accessories.
Used in electronic sensing circuits.
Used in voltage stabilizers.
Used in power conditioning equipments.
Used in Rectified Modules

A sleek wired matrix mouse will bring a touch of flair to your office. The USB cable is 120 cm long and robust, allowing you to commute comfortably. Optical sensors that are both efficient and precise. Works on all surfaces and more efficiently on wooden surfaces. From the date of purchase, the product has a one-year warranty. It's simple to use at work and home.