Rainfall Sensor Tipping SEN Rain Bucket Type
This tipping bucket rain gauge is a dependable instrument used for measuring precipitation. Rainfall that enters the 200 mm funnel collector is directed to the tipping bucket assembly. When an incremental amount of precipitation has been collected 0.2 / 0.5 mm the bucket assembly tips and activates a magnetic reed switch. The sample is discharged through the bas of the gauge. a momentary electrical contact is provided for each increment of rainfall. The contact closure is used to operate a data acquisition system. A heating kit has been added at extra cost to the rain gauge to provide capability for measuring snowfall. This rainfall sensor can be easily use with any pulse counter, Data logger / event logger which can use pulse input.
Pollution & Gases Measurement Sensor This is a multi-in-one air quality module sensor. It can accurately measure the concentration of various gases in the air. Raised dust, as one of the main sources of airborne particles, contributes 40% proportion of PM10 composition. It is a remarkable pollution which is very harmful risk for human beings. Accurate monitoring for raised dust outdoor then become necessary to provide the basis for efficient control, which is a basis to mitigate the pollutions
The PWSMini is designed by Dr. Sten L�¶fving is a spin off from our MiniOFS sensor and it is probably the cheapest Present Weather Sensor on the market. And it is very compact - the width is only 68 mm. This little sensor measures 3 important weather parameters. (1) Visibility (2) Rain - the response is fast compared to that from a tipping bucket. The threshold is also lower. (3) Snow - same as for rain - note that a simple tipping bucket sensor does not detect snow in many cases. Besides that two other weather parameters are measured and displayed: Ambient light - the resolution and accuracy is not as good as for special sensors like solarimeters but the information is useful for giving answers to questions like telling if it is cloudy or not or of course if night or day. Temperature - the temp. sensor is located inside the sensor body and the accuracy is therefore not better than about 2 deg C. (But this is in some cases good enough - trends can be seen etc.)
This sensor is used to detect the presence of surface moisture on foliage and calculate the duration of wetness. When moisture is present, the sensor detects an electrical resistance change between the gold-plated elements of the grid. This is displayed by the logger as a value between 0 (dry) and 15 (wet). Sensor Output: Resistance varies from above 3,000,000 ohms when dry to around 1,000 ohms when wet Sensor Range: 0 to 100% of the dew range, frost and freezing conditions will not harm the sensor Response Time: 0 to 100% relative dew within six minutes Output: voltage output (Analog)
MiniOFS is designed by Dr. Sten L�¶fving is used to make direct measurements of visual range. The sensor is sensitive for particles in a zone about 25 cm ahead of the location of the sensor who limit the visibility in the air. These particles are normally the microscopic water particles constituting fog, but they may also be snowflakes, raindrops or air pollutants. But the most indications of low visibility are because of fog or snow. The MiniOFS is probably the cheapest visibility sensor on the market. It is well known that fog causes many accidents in road traffic and elsewhere. You can read about how MiniOFS can reduce serial collisions in fog.
387 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
Soil Tension sensor is a solid state electrical resistance sensing device that is used to measure soil water tension. As the tension changes with water content the resistance changes as well. That resistance can be measured using the soil Sensor. The sensor consists of a pair of highly corrosion resistant electrodes that are embedded within a granular matrix. A current is applied to the Sensor to obtain a resistance value. This sensor is designed to be a permanent sensor, placed in the soil to be monitored and â??read as often as necessary with a portable or stationary device. Internally installed gypsum provides some buffering for the effect of salinity levels normally found in irrigated agricultural crops and landscapes.
The SEN-EP is a Evaporation measurement sensor used to monitor the water evaporation from Surface water, dams, lakes, pools, aquatic ponds in simulation of open PAN Evaporation measurement. Pressure Sensor with integral cable contains a vent tube for Barometric pressure compensation. Comes with 30 to 300mm range.
This is a low-cost anemometer, which utilises proven ultrasonic technology to provide wind speed and direction data via one serial or two analogue outputs. To confirm correct operation, outputs are transmitted together with an instrument status code. With a robust, corrosion-free polycarbonate housing, this small, lightweight wind sensor is recommended for use in harsh environmental conditions and is particularly suited to marine & offshore (ships, data buoys) and land based installations. The WindSon has no moving parts, offering maintenance-free operation in a wide range of applications.
The SEN-WLR is a Water Level sensor (Radar Type) used to monitor the water level of Ground / Surface water, dams, lakes, pools, aquatic ponds. This sensor can be connected to data-logger, controller or to some display by means of electronic interface. These sensors are designed by Vega. Measurement ranges for Liquid: 10 & 20 meters. This sensor is used for continuous level measurement of liquids or bulk solids. Typical applications are the measurement of liquids in storage tanks or open basins. The sensor is also suitable for the detection of bulk solids in small vessels or open containers. The non-contact measuring principle is independent of product features and allows a setup without medium.
This Soil Moisture sensor is a FDR (frequency domain reflectometry) based sensor that is used to measure Soil volumetric water content (VWC) and temperature. The sensor consists of highly corrosion resistant electrodes. This sensor is designed to be used for portable as well permanent installations placed in the soil.
Continuous and contact-free snow depth measurement. Reliable sensor for extreme conditions, Robust sealed ceramic membrane. Correct measurement during snowfall and snow drift. Protective shield against ice and snow hangings. High measuring accuracy. Integrated temperature compensation. Energy-saving sensor operation. Standby between the measuring phases. Simple sensor integration. Analogue and digital interface
The SEN-Baro1 barometric pressure sensors combine a wide pressure measurement range, wide operating temperature range, high accuracy, low power use, and low cost into a small, rugged package. These sensors are ideal for continuous barometric pressure measurement on weather stations and providing routine pressure measurements for correction of sensor outputs that are sensitive to barometric pressure fluctuations
In his instrument Two pyranometer sensors (Shortwave / Global Radiation (Choose Any one)) one upward and one downward will be attached with this handheld terminal for the collection of real time data Manually/automatically (user selectable). The terminal has its internal memory along with, a real time cloc k with an LCD (16 X 2) to display the instrument status. It is a self- contained power source system, fitted with 2XAA Alkaline type batteries with battery level display, complete with sensor .
â??Virtualâ?? make Handheld Pyranometer (Solar Radiation Recorder) reflect state of the art in micro controller based instrumentation design. The Pyranometer sensor can be attached with this handheld terminal for the collection of real time data Manually/automatically (user selectable). The terminal has its internal memory along with, a real time clock with an LCD (16 X 2) to display the instrument status. It is a self-contained power source system, fitted with 2XAA Alkaline type batteries with battery level display, complete with sensor mounted on a levelling Base Plate. Sensor powered directly from Handheld terminal and no need of external power source. 4 x 2 keypad is provided for programming data logger and monitoring sensor reading at site without the help of computer. Can store up-to 9 different sites data with Site ID. USB port is provided for data downloading from terminal to Computer/Laptop. Data file is saved in Microsoftâ??s Excel Format.
â??Virtualâ?? make Automatic Water Level Recorder (Radar type) reflect state of the art in micro controller based instrumentation design. The Radar Level sensor can be attached with this IP65 data logger for the collection of real time data automatically. It comes with facility to transport Data from Data Logger to a P.C. through various modes (As per Customer requirement). 16x2 LCD alphanumeric display and 4x2 membrane keypad is provided at front panel of data logger for programming data logger and monitoring sensor reading at site without the help of computer. Comes with different ranges for Liquid: 8, 15, 35, 70 & 120 meters. Data file is saved in Microsoft's Excel. This instrument is used for continuous level measurement of liquids or bulk solids. Typical applications are the measurement of liquids in storage tanks or open basins.
This product adopts a high sensitivity detector, integrate circuit and SMT; It gathers automatic, convenient, safe, energy-saving, practical functions; It has a wide detection range made up of up and down, left and right service field; It utilizes human motion infrared rays as control signal sources when one enters the detection field, it will start the controlled load at once; It can identify day and night automatically; It is easy to install and its usage is wide; It has the function of power indication and detection indication.
Specification:
1.Detection Range: 180 degree
2.Power Consumption: 0.45W (work) 0.1W (static)
3.Detection Distance:max.12m
4.IP65
Function:
Detection field: The wide detection range is made up of up and down, left and right, the detection range could be adjusted according to your desire, but the moving orientation in detection field has great relation with the sensitivity.
Identify day and night automatically: The ambient light of product could be adjusted according to your desire: when turn to SUN (max), it will work day and night, when turn it to MOON (min), it will only work in the ambient light less than 3LUX. As for adjustment, please refer to testing way.
Time-delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the rest of the first time-delay basis (set time).
Time-delay is adjustable: It can be set according to your desire, the minimum is 10sec ±3sec, and the maximum is 7min±2min.
Quick Sense(Qs-WR02): Wardrobe/Cabinet Smart IR Sensor
Quick Sense(Qs-WR03): Mirror/Hand Smart IR Sensor for Auto Lights Auto On and Off Upon Moving Hand
Power source: 220-240V/AC
Power Frequency: 50/60
Install the product on the wall with two enclosed inflated s
Connecting the power and the load to the sensor as the connection-wire diagram
Switch on the power an
It is a Short Distance IR Sensor. Its ON or OFF is controlled by hand movements. When you move your hands towards the IR sensor, it gets detection and turns on the light. The light will be switched off until the IR sensor detects another movement by hand. NOTE: In front of the detection window there shouldnâ??t be hinder or unrest objects affecting detection
Quick Sense Wardrobe Cabinet Hinge LED Motion Sensor Night Light System (White, 0.25 W) - Set of 10 Pack Smart Sensor Light
Specifications:
Material: ABS; Color: Grey
Lighting Color: Warm white/Cool white (Optional)
Battery: 12V 23A(Not Included)
Type: Smart Sensor; Bead Quantity of Each Light: 3pcs
How to Installation:
Step1: First open the hinge screws on the backsheet
Step2: Put the back sheet screws and hinges screwed together
Step3: Put the battery into the LED hinge light
Step4: Make LED lighting into the card pre-installed on a good film
Step5: Put the thickest chucking and complete
Can be used in your home cabinet, closet, cupboard, or wardrobe with a hinge. Note: suitable for hinges like the picture, the screw in the hinge must be screwed off, the led light base need to be mounted in there
It can use with lamps, incandescent lamps (bulbs), old-fashioned fluorescent lamps, electronic fluorescent ring lamps, spotlights, transformers, small electrical appliances, and other all other appliance
Good solution for energy saving and easy in installation. and Delay adjustment: 10 Seconds - 7 Minutes and Adjustable Lux: turn on the lights during the day or night
Using the automatic control product of infrared technology,when people walk into the sensor range,and the sensor can detect the spectral change of the human body infrared ray,during this time,the switch will connect the load automatically until the person leaves the sensor range. 2, Through the photosensitive control , it will not turn on the lights in the daytime or light environment, but also can be adjusted in any lighting environment sensing lights
Sensitivity Adjustable: Turn on Lights during Day or nights
387 Electric Sensors Suppliers
Short on time? Let Electric Sensors sellers contact you.
