Find Verified Chemicals Allied Products Suppliers, Manufacturers and Wholesalers

This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites.

Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature.
Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts.

PREPARATION OF FURANE MORTAR :
Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life.
Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Octoate, Zirconium Octate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Ocatate, Zirconium Octate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Octoate, Zirconium Octate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Octoate, Zirconium Octate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Octoate, Zirconium Octoate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Ocatate, Zirconium Octate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Our products
Dispersing Agent, Dispersants, Epoxy Resin , Hardener, Lead Ocatate, Zirconium Octate, Isocyanate il 351,L75
Resin Epoxy Reson
Short Oil Alkyds, Alkyds for Woods, Modified Alkyds,
Styrene modified Alkyds, Thermoplastic Acrylic Resin,
Acrylic Polyol Resins, Alkyds Polyol Resins, Saturated Polyester resin,
Unsaturated Polyester Resin, Epoxy Resins, Medium Oil Alkyds, Long Oil Alkyds,
Maleic resin, Homo- Polymer, Poly Vinyl Acetate, Acrylic Copolymer- Emulsion,

Solvents Ethyl Acetate, Butyl Acetate, Xylene, White Sprite etc.

Potassium hydroxide is an inorganic compound with the formula KOH, and is commonly called caustic potash. Along with sodium hydroxide, this colorless solid is a prototypical strong base. It has many industrial and niche applications, most of which exploit its caustic nature and its reactivity toward acids

For price and specifications please contact us

It is a waxy solid and its chemical formula is C17H35CO2H. The salts and esters of stearic acid are called stearates. As its ester, stearic acid is one of the most common saturated fatty acids found in nature following palmitic acid.

Solubility in acetone: 4.96 g/100 g
Solubility in chloroform: 18.4 g/100 g
Solubility in toluene: 15.75 g/100 g
Melting point: 69.3 'C (156.7 'F; 342.4 K)

Stearic Acid also called as Octadecanoic Acid or Stereophonic acid is a long chain saturated fatty acid. It is usually found in Cocoa butter, Shea butter, animal fats and plants. It is a mixture of approximately equal amounts of oleic acid. It is employed in the manufacture of candles, cosmetics, shaving soaps, lubricants and pharmaceuticals.

Uses and Application-

Stearic Acid is used most often to thicken and retain the shape of soaps and is also used in shampoo, shaving cream and detergents.
It is used as a surfactant and emulsifying agent for fragrance and as the base for other fatty acid ingredients that are synthesized into emollients and lubricants.
It is used along with Castor Oil for preparing softeners in textile sizing.
It is used in manufacture of candles and as a hardener in candies when mixed with simple sugar and corn syrup. It is also used to produce dietary supplements.
In firewood, Stearic Acid is often used to coat metal powders such as aluminum and iron. This prevents oxidation, allowing compositions to be stored for a longer period of time.
Stearic Acid is a common lubricant during injection molding and pressing of ceramic powders, it is also used as a mold release for foam latex that is baked in stone molds.

LEATHER TANNING CHEMICALS

Sodium Sulfide
Hydrated Lime
Sodium Carbonate
Formic Acid
Acetic Acid
Surfactants
Dyes and Pigments
Resins
Tannic Acid

STABIFLO-WM-CWS-623T is a Waxy Maize based Pregelatinized Hydroxypropyl Distarch Phosphate (E-1442). It is Vegan, Gluten-Free and Plant-based. STABIFLO-WM-CWS-623T has a high process tolerance, excellent freeze-thaw stability, thickening properties, higher water holding capacity and emulsification properties. It is a highly versatile starch and recommended for use in alkaline conditions, high pH foods and also in foods containing acid. STABIFLO-WM-CWS 623T has excellent cold temperature stability and provides a smooth, creamy texture. It is widely used in Dairy products, Mayonnaise, Yoghurt, Cream products, Canned products, aseptically processed foods, cream based sauces, puddings, Frozen foods, pie fillings, gravies, etc.,

DOM is a clear, colourless liquid with an ester-like odor. It is miscible with ethanol, methanol ,acetone, and toluene, but not with water and aliphatic hydrocarbons. On heating in presence of acids or bases, DOM reacts to form fumaric acid dialkyl ester.

Triethylene glycol is a member of a homologous series of dihydroxy alcohols. It is a colorless, odorless and stable liquid with high viscosity and a high boiling point. Apart from its use as a raw material in the manufacture and synthesis of other products, TEG is known for its hygroscopic quality and its ability to dehumidify fluids. This liquid is miscible with water, and at standard atmospheric pressure (101.325 kPa) has a boiling point of 286.5 �°C and a freezing point of -7 C. It is also soluble in ethanol, acetone, acetic acid, glycerine, pyridine, aldehydes; slightly soluble in diethyl ether; and insoluble in oil, fat and most hydrocarbons.

Dehydrated onions are produced from freshly harvested, premium-quality onions that are cleaned, peeled, sliced, and carefully dried to preserve their natural flavor, aroma, and nutritional value. Available in various forms such as flakes, minced, chopped, granules, and powder, dehydrated onions offer a convenient and long-lasting alternative to fresh onions without compromising on taste.

These are widely used in soups, sauces, curries, spice blends, snacks, ready-to-eat meals, and seasoning mixes across the food industry. With excellent shelf stability, consistent flavor, and easy rehydration, dehydrated onions are a preferred ingredient for food processors, restaurants, and bulk importers worldwide.

At Tatsya Edibles LLP, we ensure our dehydrated onions are processed under hygienic conditions, maintaining international quality standards and customized to meet specific client requirements.

Versatile Forms: Flakes, minced, chopped, granules, and powder for diverse culinary and industrial applications.

Long Shelf Life: Can be stored for months without refrigeration, reducing spoilage and waste.

Easy Handling & Use: Ready-to-use, no peeling or chopping required.

Consistent Quality: Uniform size, color, and flavor for reliable use in sauces, seasonings, spice blends, snacks, ready-to-eat meals, and processed foods.

100% Natural & Clean Label: Free from preservatives, artificial colors, and additives, meeting international food safety standards.

Applications:
Widely used in food processing, bakery products, soups, sauces, ready-to-eat meals, snack foods, and seasoning mixes. Ideal for importers, food processors, and manufacturers seeking a high-quality, convenient garlic ingredient.

Quality & Safety:
At Tatsya Edibles LLP, every batch undergoes strict quality control from raw material inspection, sorting, and controlled dehydration to metal detection, microbial testing, and hygienic packaging. We maintain a defect rate below 1%, ensuring purity, safety, and international compliance.

Customization Options:
Available in different forms, cut sizes, moisture levels, and packaging to meet client requirements. Bulk, retail-ready, and private-labeled options are available, along with third-party certification and complete export documentation.

Dehydrated garlic is made from fresh, premium-quality garlic cloves that are peeled, cleaned, sliced, and carefully dried to preserve their natural aroma, pungency, and nutritional properties. Available in multiple forms flakes, minced, chopped, granules, and powder our dehydrated garlic offers a convenient, long-lasting alternative to fresh garlic without compromising flavor or quality.

Key Features:

Rich Flavor & Aroma: Retains the distinctive pungency and taste of fresh garlic.

Versatile Forms: Flakes, minced, chopped, granules, and powder for diverse culinary and industrial applications.

Long Shelf Life: Can be stored for months without refrigeration, reducing spoilage and waste.

Easy Handling & Use: Ready-to-use, no peeling or chopping required.

Consistent Quality: Uniform size, color, and flavor for reliable use in sauces, seasonings, spice blends, snacks, ready-to-eat meals, and processed foods.

100% Natural & Clean Label: Free from preservatives, artificial colors, and additives, meeting international food safety standards.

Applications:
Widely used in food processing, bakery products, soups, sauces, ready-to-eat meals, snack foods, and seasoning mixes. Ideal for importers, food processors, and manufacturers seeking a high-quality, convenient garlic ingredient.

Quality & Safety:
At Tatsya Edibles LLP, every batch undergoes strict quality control from raw material inspection, sorting, and controlled dehydration to metal detection, microbial testing, and hygienic packaging. We maintain a defect rate below 1%, ensuring purity, safety, and international compliance.

Customization Options:
Available in different forms, cut sizes, moisture levels, and packaging to meet client requirements. Bulk, retail-ready, and private-labeled options are available, along with third-party certification and complete export documentation.

TTA ( Tolyltriazole)

Sodium Hypochlorite ,
Calcium Hypochlorite ,
Sodium Chloride,
SLS Powder (Sodium Lauryl Sulphate) ,
SLES (Sodium Lauryl Ether Sulphate) ,
EDTA Di Sodium,
EDTA Tetra Sodium ,
HCL (Hydro Chlorid Acid) ,
Sulphuric Acid ,
Morpholine,
Caustic Soda ,
Flakes Caustic Lye,
Soda Ash ,
Hydrazine Hydrate ,
Paint Removal,
TSP (Tri Sodium Phosphate) ,
STPP (Sodium Tripolyphosphate) ,
Bleaching Powder,
Acetic Acid ,
Hyflo Supercell...
Elevate your industrial processes with our high-quality commercial chemicals, meticulously formulated for efficiency and reliability.