Find Verified Battery Testers Chargers Suppliers, Manufacturers and Wholesalers

Roots Ignite Battery Rmf Z5

Roots Ignite Battery Rmf Z4

Roots Ignite Battery Rmf 9b

Roots Ignite Battery Rmf 7b

Roots Ignite Battery Rmf 5 Lb

Battery Rmf 2.5lc

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking
6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation.
Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps.
Multiple functions- Alternator state check, battery state check, Battery overload display
With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.

Small size and lightweight, convenient to carry, Easy and safe to use, no sparking
6 LED displays, clearly present the alternator and battery state. Two testing clips for safe and easy operation.
Suitable for 12V lead-acid batteries, hardtop batteries, discharge batteries, and maintenance-free batteries heavy duty insulated clamps.
Multiple functions- Alternator state check, battery state check, Battery overload display
With a good chip inside, not easy to get hot on the surface, suitable for cars, motorcycles, etc.

Battery Tester Checker Universal Battery Tester Monitor (BT01)
Quick Sense(BT01): Battery Tester Checker Universal Battery Tester Monitor for AA AAA C D 9V 1.5V Button Cell Batteries
Easily check if the batteries are good or bad.
It can test different types of batteries, even rechargeable ones.
Fit For: AA/AAA/C/D/9V/1.5V Button Cell Battery (Batteries not included)
This will keep you from wasting good batteries by throwing out good ones.
Small and practical - Simple but effective little battery tester checker(BT-168), compact size and lightweight, easy to carry.

Digital Battery Tester Household Battery Checker Tester for Small Batteries Button Cell BT-168D
Digital Battery Tester for AAA AA C D 9V 1.5V, Household Battery Checker Tester for Small Batteries Button Cell (Model: BT-168D)
Get accurate readings on AA, AAA, C, D, and 1.5V 9V batteries
Easy-to-read, digit indicates power level
Check power level of 9V and 1.5V battery
Quickly test the capacity of your battery
Lightweight and compact design measures 11Ã?? 6Ã?? 2.5 cm

Never again get caught with a dead household battery. This handy digital battery tester makes it easy for you to get the most out of your batteries and lets you know when it is time to get a new one.

CTEK battery charger for car, commercial vehicles off road vehicle and motorcycle. Jump starter, Foxwel OBD scanner.

MIicrotex DG Starter Heavy Duty Batteries with new technology for Genset applications. The Heavy Power Batteries come with exclusive features to meet the demanding conditions for Genset applications in the Indian environment. These batteries are manufactured using state of the art techniques and quality components, materials for reduced maintenance and extended battery life.

We are leading manufacturers & suppliers of best quality Golf Cart Batteries.

Microtex Golf cart batteries - Special Features:
Special Antimonial alloys for good cycle life and low maintenance
Tubular spine grids casted at 100 bars High Pressure die casting on German technology machines, for high compacted & corrosion resistant grids.
Proprietary chemical mixes for added service life.
Heavy duty custom made separators.
Heat sealed to eliminate container leakage.
Available in wide range of 6v, 8v & 12 volts

We are leading manufacturers & suppliers of best quality of VRLA AGM Telecom Battery.

We are leading manufacturers & suppliers of best quality of UPS Tubular .

Microtex traction cell is assembled in a high-grade plastic container containing high performance tubular positive plates in premium energy bags. Microtex traction cells deliver consistent reliable power. Our product is suitable for all weather condition. Water loss and maintenance is minimum. Microtex traction batteries are used in electrically powered vehicles like the forklift, Pallet Truck, Scissor Lift and any other industrial traction applications. Microtex lead acid traction batteries are manufactured in India by Microtex Energy P Ltd. for more than two decades. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory at Peenya, Bangalore. Microtex traction batteries are used in electrically powered vehicles like a forklift, tow truck, power trolley, lifting platforms and other industrial traction applications. These traction batteries are made to BS & DIN specification.

Constructional Features:


Each traction cell is assembled in a high grade plastic container
The container containing high performance tubular positive and pasted negative plates. The positive and negative plates are separated by high-quality PE Separators
The tubular positive plates have specially designed spines, cast from corrosion resistant lead-antimony-selenium alloy ensconced in the tubular bag which is Vibro-filled
The pasted negative plates made up from a blend of oxide, special additives and expanded, aid in cell longevity
The high-quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
The high-grade plastic containers are non-reactive to acid, temperature and the gases emitted by the cell
Short-circuit between plates due to sediments is avoided by the use of a prismatic sediment spacer placed at the bottom of the plastic container on which the plates rest
The splash-proof vent plugs prevent the escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell

Microtex electric multiple unit or emu battery is made up of 5 cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. Water loss and maintenance is minimum delivers consistent reliable power. Microtex lead acid EMU batteries are manufactured by Mysore Thermo Electric Private Limited.

Microtex EMU Battery is made up of 5 cells of 2 Volts each. The cells assembled in Molded Monoblock Hard Rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the spilling of the electrolyte.

Constructional Features:

Each cell assembled in Monoblock Hard Rubber container containing Microtex hi-performance tubular positive plates in premium Energy Bags Acrylic Gauntlets bags, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance.
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest.
The Microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell


Special Features:

The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle

We are leading manufacturers & suppliers of best quality railway batteries in india.

Microtex Valve Regulated Lead Acid Batteries is designed to meet Industrial Standards. The battery works on gas recombination technology, which eliminates the need to top up the batteries with water periodically and is mounted horizontally in robust stack able steel modules. Microtex makes VRLA batteries generally conforms to the following International Standards: IEC 60896-21 ED. 1.0 B:2004, BS 6290 Part-IV Tec Spec: G/BAT-01/03, March 2004 & IEEE 1188-2005

Features:

Gas recombination technology that eliminates the need to add water periodically
Robust and Aesthetically attractive modular design with thermal control features
High-performance operation with no maintenance
Efficient and Effective Vent valve Assembly

Constructional Highlights:

Flame retardant cell case
Proprietary process technology ideal for all climatic Conditions
Robust & aesthetically attractive modular design with thermal control features
Unique European type wide electrode design
Leak resistant double seal terminal design
Efficient & Effective Vent Valve Assembly

Advantages:


Gas recombination technology that eliminates the need to add water
Installation that is high on convenience is friendly & provides peace of mind
Robust & aesthetically attractive modular design with thermal control feature
Product Range:-
Model Type

Capacity (AH) at C10 rate of discharge

No. of cells per module

Module Voltage

Module Dimensions in mm

Approx module weight in Kg(± 5%)

Internal resistance of cell in milliohms

short circuit current in KA

Length (±15 mm)

Depth (±15 mm)

Height (±15 mm)

M-100 V

100

6

12 V

655

275

216

60

.95

2.25

M-200 V

200

6

12 V

655

375

216

100

0.73

2.94

M-300 V

300

4

8 V

857

380

141

90

0.56

3.84

M-400 V

400

4

8 V

870

375

180

120

0.47

4.58

M-500 V

500

4

8 V

940

380

235

165

0.42

5.09

M-600 V

600

4

8 V

940

380

235

175

0.32

6.64

We are leading manufacturers of UPS Batteries.

Product Range:-

Battery TypeCapacity in AH at 27 CDimension (In millimeters)+3 mmApprox Weight Kg+5%
C20C10LengthWidthHeight*I DryFilled
MTU 150 TT15012051019441034.261.20
MTU 160 TT16013051019441037.062.80
MTU 200 TT20016051019441045.6072.0
MTU 150 JT15012051022029335.6048.4
MTU 170 JT1701351022029342.6055.4
MTU 200 JT22017551827429351.070.0

Recharging Instruction:

Charge at limit current of 15% of C 10 up to 13.8 V
Current reduced to 300-500 mA and adjust voltage between 13.2 to 13.5

Installation Guide:

Wooden or Plastic (Non-conductive) planks should be used for placing the battery
For 24 V requirement, 2 batteries may be connected in series
Higher Current Requirement series-Parallel connection maybe used

Features:
Proven Tubular Technology
Electrolyte level indicator with in-built Ceramic vent plug
High acid volume per ampere hour
Advantages:
Active material retained within the bags-Longer life
Low Maintenance of battery-Topping up
Suitable for use in areas of frequent power cut

Microtex train lighting batteries for railway applications are manufactured in india by mysore thermo electric private limited for over two decades. Mtepl has a well-established battery division with fully equipped chemical and electrical laboratory at peenya in bangalore.

Microtex train lighting batteries are made up of a number of cells of 2 volts each. The cells assembled in molded monoblock hard rubber containers are connected with welded joints made of lead alloy with an anti-corrosive coating. The microporous vent plugs fitted to the cells prevent the spilling of the electrolyte.

Constructional features:


Each cell is assembled in monoblock hard rubber container containing microtex high performance tubular positive plates in premium energy bags tubular gauntlets, pastes negative plates manufactures under exacting control to withstand rough handling and electrically separated by high quality pe separators
The tubular positive plates have specially designed spines cast from corrosion resistant lead antimony-arsenic alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high rate discharge, more capacity for a given volume, grater shock resistance and long life with excellent reserve capacity
The pasted negative, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality pe separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest
The microporous vent plugs prevent escape of electrolyte. The hard rubber top cover gives a perfect airtight sealing to the cell.
Microtex train lighting cells are dry, uncharged and are low maintenance batteries

We are leading manufacturers & suppliers of Loco Starter Battery in India.

Microtex lead acid Diesel Loco Starter batteries are manufactured by our associated company. The unit has a well established modern battery manufacturing facility with a fully equipped chemical and electrical laboratory.The cells assembled in either Molded Monoblock Hard Rubber containers or Plastic Containers housed in a Sturdy and Rugged FRP Tray are connected with welded joints made of lead alloy with an anti-corrosive coating. The Microporous Vent Plugs fitted to the cells prevent the loss of electrolyte.

Constructional Features:

Each cell assembled in either Monoblock Hard Rubber container or Rugged FRP Tray, containing Microtex high performance tubular positive plates in premium Energy Bags Acrylic Tubular gauntlets, pasted negative plates manufactured under exacting control to withstand rough handling and electrically separated by high quality PE Separators
The tubular positive plates have specially designed spines casts from corrosion resistant lead antimony-selenium alloy ensconced in tabular bag which is vibro-filled with active material and pickled, thus ensuring high-rate discharge, more capacity for a given volume, greater shock resistance and long life with excellent reserve capacity
The pasted negative plates, made up from a blend of oxide, special additives and expander, aid in cell longevity
The high quality PE separators provide high electrical insulation between the plates with low internal resistance for improved battery performance
Short-circuit between plates due to sediments is avoided by the use of sediment spacer at the bottom of the container on which the plates rest
The Micro porous vent plugs prevent loss of escape of electrolyte. The hard rubber top cover gives a perfect air-tight sealing to the cell
Microtex lead acid Diesel Locomotive Batteries are low maintenance batteries

Special Features:


The low antimony content in the grid alloy ensures low gassing
Water loss and maintenance is minimum
Corrosion is negligible
Very low self-discharge and internal resistance
Excellent reserve capacity
Delivers consistent reliable power
Suitable for all weather conditions
Long life cycle