SKIDDOMETER BV11
All airports with turbojet traffic should own or have access to a CFME. Skiddometer BV11 is the most reliable and accurate system for determining runway surface friction values.
The Skiddometer CFME system is designed for easy towing with any vehicle. It incorporates features and improvements gained from more than fifty years of experience. The product proven lifecycle cost is the lowest in the market. Only a few of the Skiddometer parts are exposed to wear, so maintenance and calibration are only needed once a year. The trailer is designed to last for decades and all models can be updated with current parts and the latest computer system.
AVEC, Inc. offers an On-Board Sound Intensity (OBSI) system to measure tire-pavement noise. The hardware and software specifications are based on the current AASHTO standard (T 360-16: Standard Method of Test for Measurement of Tire/Pavement Noise Using the On-Board Sound Intensity (OBSI) Method). The software and hardware components can be bought separately to upgrade an existing system or as a turn-key system including:
AVEC's OBSI Software with USB remote for easy software control.
AVEC's OBSI Fixture (see details below).
Two (2) GRAS 1/2" Intensity Probes (4 microphones), IEPE or externally polarized.
National Instruments DAQ (USB-9234, 4 channels).
GRAS 42AB Sound level calibrator.
Semi-rugged Laptop (with software pre-installed).
Plastic carrying case for OBSI system.
Wind screens and cables for intensity probes.
DC/AC converter.
Required tools.
Other optional items include:
Introduction:
The PE pipe guillotine series is a series of professional PE pipe cutting tool produced by E-WORK. The design of the guillotine is reasonable and simple. The machine body is made of high strength ductile cast iron, which has high intensity and ductility. It can resist deformation under pressure, and crash-proof. The blade is made of high strength tool steel and specially heat treated to achieve a balance of strength and toughness. In addition, the surface of the blade is coated with the Teflon coating, which not only ensures the fast cutting of the blade but also durable. It is the ideal PE pipe cutting tool at present.
Application:
Flammable and explosive environment, free-noise area, etc.
Product features:
1. The professional pipe cold cutting tool.
2. Safe operation, pure manual operation, and no spark together ensure the safety of pipe construction.
3. Cut without debris to ensure the inner cleaning of the pipe and prevent the valve from blocking. Therefore, compared with the grinding wheel saw, the guillotine is safer. When cutting PE pipe with the guillotine blade, the blade will not extrude the PE pipe to ensure the safety of the PE pipe.
4. The blade has a long service life. Unlike the pointed blade, the PE pipe guillotine with taper blade has a straighter cutting
and a longer service life.
5. The machine conforms to ergonomic principles and saves time and effort in operation.
Advantages:
1. Equipped with a long handle, lighter and easier to swing.
2. The accurate design makes cutting straight and efficient
3. The rack is made by super strengthen nodular cast iron, which is strong and of good ductility.
4. Super strengthen steel combined with special heat treatment make the blades reach a balance.
5. Unique block design makes it faster and easier to put in PE pipes.
Self-centering pipe cutting & beveling machine adapts high strength & precision ring structure. It is used for pipe end cutting and beveling, especially for batch working with very high efficiency.
Adopt METABO motor: low noise, long life, stable performance and perfect speed adjustable function, with CE certificate.
METABO Motor: 1300W 6.0A
Featuresï¼?
1. Self-centering, make the installation much faster.
2. Compact structure and good appearance, high strength aluminum body.
3. Adopt new synchronous feeding mechanism, feeding uniformity, tool bits has longer working life.
4. Easy set-up, operation and maintain.
5. Cutting & beveling finished at same time, high working efficiency.
6. Cold working, no spark, wonâ??t make the material affected.
7. Perfect working precision, no burrs
8. Well-adapted, you can make the speed adjust depend on the working conditions.
Introduction:
This machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine
to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut and bevel, single point and flange facing operations, as well as weld end preparation on open ended pipe. It can be used on pipe size from 1â?? to 56" of most wall thicknesses and materials.
Pipe Size: 25-89mm or 1-3inch
Wall thickness (standard)ï¼?â?¤30
Wall thickness (heavy duty)ï¼?â?¤110 mm
Cutting speed: 42 r/min - 8 r/min
Product material: chrome molybdenum steel, low temperature steel, titanium alloy steel, etc.
Features:
1. Low axial & radial clearance.
2. Small working radius, suitable for any working situation.
3. Cutting and beveling at the same time.
4. Can be opened to use on pipe in the wall or no end open pipe.
5. Cold cutting work methods, which don't damage the pipe.
6. Multiple bevel joint types: V, U, J, compound and counter boring etc.
7. Customize the machine according to your requirements.
Introduction:
Hinge type pipe cutting machine series is produced by E-WORK to cold cut carbon steel, stainless steel, cast iron, and nodular cast iron pipes. The ultralight body design and reasonable physical setting optimize the cutting performance. Super strengthen steel combined with special heat treatment make the blades reach a balance- cuts faster and wear well.
Application:
This series of pipe cutting machine is widely used in free-spark and explosive environment, no noise area, narrow space trench, underwater, pipe rack, etc..
Product Features
a. The professional pipeline cold cutting tool;
b. Pure manual operation, no sparks, safe;
c. Debris-free, clean, no risk of the valve block;
d. Suitable positioning device makes clean and straight cuts, more efficient;
e. Unique blade design, simultaneously cutting by four blades, faster and easier;
f. Simple operation procedure, no other power source required, wear well;
g. Short handle, swing range between 90 and 110 degrees, suitable for narrow working space;
h. The applicable pipe cutting machine for nodular cast iron, carbon steel, and even size 100 super thick steel pipes.
Advantages:
a. The short handle suits perfectly in narrow space.
b. The solid guide frame makes straight cuts.
c. The blocking device makes the rack open easily.
d. The unique feed screw makes cutting with uniform speed and strength.
e. Super strengthen steel combined with special heat treatment make the wheels reach a balance.
f. The design complies with human body engineering principle makes cutting easier.
Introduction:
Rotation type pipe peeler for PE pipes is produced by E-WORK to peel PE pipes. It is the necessary tool before electric fusion welding plastic pipes and accessories. The surface of the pipes will be clean and even after peeling. If necessary, the peeling can be repeated. This type of peeler is made by the combination of an adjustable support frame of all working sizes and a handle with a fixed blade. It is simple and easy to operate, and the cutter bar is capable of expansion and contraction, with no jam risk. It is the ideal existing peeler in the industry. With its inner support structure, the handle is the only thing moves around the surface of the pipe, hence it's smooth when working, with no jam risk. The ERS series of product ensure constant regular peel and adjustment of plastic pipes. The bearing of the blade can reach the length of the whole electrical casting, which fits the requirement of the peeling range.
Application:
Flammable and combustible environment, free-sound area, narrow grooves, underwater.
Product features:
1. The professional peeling machine for pipes.
2. Safe and dependable, pure manual operation, convenient.
3. The blade lasts long with groove function.
4. The cutting points are placed on circular rows, which does no harm to the pipes.
Features:
Reflow solderable
With rotation stopper
Low profile type (1.2mm in height)
Conform to RoHS Directives
Achieved excellent endurance characteristics by using "Metal-glaze" film
Standard packing: 2500pcs/reel
Standard resistance range: 100Ohm to 1M Ohm
Features
Operating Temperature Range: -40 ~+105
Body Diameters Range From 5D to 20D
Wide Operating Voltage from 18V to 1800V
Full compliance with RoHS and REACH
Applications
Industrial equipment
Home appliance
Industrial equipment
Lighting products
Telecommunication or telephone system
W-B92 series Webster hardness test for stainless steel can quickly test the hardness of stainless steel on site. It is convenient to operate, and as long as clamping the test can be finished. The hardness value can be read directly with high efficiency and reliability.
The Webster Hardness Tester is the first choice instrument for testing the mechanical property of stainless steel plate and strip.
The Webster Hardness Tester is used for quick testing of austenitic stainless steel and mild steel plate and strip.
Advantages of Webster Hardenss Tester for Stainless Steel
Portability. The high quality portable instrument box, perfect fit sponge for buffer, not only provides portability for instrument, but also supply the maximum protection at the same time.
Easy Operation. This webster hardness tester is easy to be operate, the work to be tested is placed between the anvil and the indenter, and then apply the pressure to the handles until "bottom" is felt at which time the dial indicator is read.
On-site Testing. It is can be used for quick and nondestructive qualification test of batches products one by one on production field, sales site and construction site.
Parameter of Webster Hardenss Stainless Steel Tester
As a china rockwell superficial hardness tester factory, we will do our best to meet all the needs of customers.
123 Tools Instruments Suppliers
Short on time? Let Tools Instruments sellers contact you.
