Strong Features
Type: DIP with ground terminal tact switch
Operation Life cycles: 100000
Soft feeling
High operating force
Steady and low contact resistance
Compatible with most surface mount soldering processes
Improved operation by using a larger push plate
RoHS and REACH compliant
Operating Temperature Range: -30 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.15±0.05mm
Operating Force:1.8�±0.5N
Strong Features
Type: 2 Pin DIP tact switch
Operating Life Cycles: 50000
Good drop resistance
Improve mounting density of components on PC board.
Reflow solderable
Contacts are completely sealed, enhancing reliability
RoHS and REACH compliant
Operating Temperature Range:-20 to +70
Rated Current and Voltage:50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength:250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance:50m
Full Travel:0.25 0.1mm
Operating Force:1.0 �±0.3N 1.6�±0.5N 2.6�±0.5N
Common Height:
4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height can be set at the full discretion of the consumer.
Strong Features
Type:2 Pin DIP tact switch
Operation Life Cycles:60000,80000,100000
Variety of lever lengths
Supplied with radial taping
Allows automatic insertion onto PC board with the radial auto insertion machine
RoHS and RAECH compliant
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Fore: 2.0±0.5N
Strong Features
Type: DIP tact switch with LED
LED Color: Red, Blue, White, Yellow, Green
Operating Life cycles: 500000
Models with ground terminals are available of protection against static electricity.
Some of output terminals can be also used as jumper leads to make the circuit design easy.
RoHS and REACH Compliant
Operating Temperature Range: -20deg to +70deg
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: â?¥100MOhm
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50mohm
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3Nï¼?1.6�±0.5Nï¼?2.6�±0.5N
Common Height:
4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Type: DIP tact switch
Operation Life cycles: 60000 80000 100000
Several kinds of height
Cambered terminals to ensure self retention
Meets REACH and RoHS standards
Main Specifications
Operating Temperature Range : -20C to +70C
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: 00MoHM
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: â?¤50mOhm
Full Travel: 0.25�±0.1mm
Operating Force: 1.0�±0.3Nï¼?1.6�±0.5N
Common Height:
4.3mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm
The Heightï¼?Hï¼?can be set at the full discretion of the consumer.
Features
Type: 2 Pin DIP tact switch
Operation Life cycles: 100000
Large choice of caps
Supplied with radial taping
Allows automatic insertion onto PC board with the radial auto insertion machine
RoHS and REACH compliant
Operating Temperature Range: -20C to +70C
Rated Current and Voltage: 50mA. / 12VDC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 1.0±0.3N1.6±0.5N2.6±0.5N
Common Height:3.8mm,4.3mm,5.0mm,6.0mm,7.0mm
The HeighHcan be set at the full discretion of the consumer.
Strong Features
Type: DIP tact switch
Operation Life Cycles:40000,50000,60000
Positive tactile feeling
Various Knobs for low or high profile actuations
Cambered terminals to ensure self retention
Vertical and horizontal operating direction
RoHS and REACH compliant
Main Specifications
Operating Temperature Range:-20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 100m
Full Travel: 0.25±0.1mm
Operating Force: 1.6±0.5N
Common Height:
4.3mm,4.5mm,5.0mm,5.5mm,6.0mm,6.5mm,7.0mm,7.5mm,8.0mm,8.5mm,9.0mm
The Height H can be set at the full discretion of the consumer.
Strong Features
Contact type: Vertical and Horizontal with bracket DIP tact switch
Operation Life cycles: 80000
Outline dimension 6.0mm x 6.0mm
Variety of lever lengths, Positive tactile feedback
Good drop resistance, RoHS and REACH compliant
Available with anti-ESD (Electro Static discharge) ground terminal
Additional models and versions available
Seal level: IP67 (1 meter underwater immersed for 1 hour) Shock resistance, vibration, anti-misplacement Insertion cable Suspension anti-electromagnetic interference protection No installation tools In addition, compared with other reinforced shell smaller and lighter; Signal attenuation; to prevent unauthorized tap and disconnect; support most of the network services; easy to engineer management and maintenance; highly resistant, including heat, humidity, dust and water interference; excellent expansion and application upgrade potential;
1. Rated current: 1.5A
2. Rated voltage: 125V
3. Insulation resistance: 500
4. Contact resistance: 30M
5. withstand voltage: AC 1000V RMS 50 Hz or 60 Hz 1 minute machine
material
1. Housing: ABS resin (U L94V - 0) PBT (UL94V - 0 compliant) Nylon 66 (UL94V - 0 compliant) Nylon 46 (UL94V - 0 compliant)
2. Contact line: 0.45 m diameter phosphor bronze gold plated, the thickness of 0.35, nickel-phosphorus bronze alloy Selective nickel plating
3. Shield: 0.20 - 0.25 mm thickness tin plated brass
4. Gold plated: 3U inch, 6U inch, 15U inch, 30U inch, 50U inch
surroundings
1. Operating temperature: -40 C to 70 C
S2700 Series Switches
FE downlink ports and GE uplink ports
Switching capacity of up to 64 Gbits
Intelligent Stack for simplified network configuration and management
Highly scalable and energy-efficient, S2700 Series Switches provide Fast Ethernet 100 Mbit s speeds for enterprise campus networks. Combining advanced switching technologies, Versatile Routing Platform (VRP) software, and comprehensive built-in security features, this series is well suited for building and expanding future-oriented Information Technology (IT) networks.
Our company involves voice communications, video conferencing, data communications, server storage, network transmission, wireless secure transmission access, UPS, cloud computing, worker intelligence and other Internet of things and Cisco switches, video conferencing, servers and other integrated solutions of the whole chain products. If you have any need, please contact me. Looking forward to cooperating with you!
Basic Details
Brand new with one year warranty
Quick supply, large in stock,ship today
24H professional service
Supplier Details
was established to provide high-quality industrial replacement parts to the global marketplace. We believe in providing above-standard services and products for a fair price, and we warranty all of our parts for 24 months. We specialize in mature, legacy, and end of life products. Our experienced staff allows us to delivery quality products.
Operating Temperature Range: -20 to +70
Rated Current and Voltage: 50mA. / 12V DC
Insulation Resistance: 100M
Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds
Contact Resistance: 50m
Full Travel: 0.25±0.1mm
Operating Force: 2.6±0.5N
Strong Features
Type: DIP tact switch with LED
LED Color: Red, Blue, White, Yellow, Green
Operation Life cycles: 500000
Good tactile feedback
Laser etched symbol with LED illumination
A variety of housing, cap options available for selection
RoHS and REACH compliant
MPO Patch Panel
The MPO Fibre patch panel, also known as a cross-connect distribution frame, can be compared to the nerve centre of a cabling network. It provides a very simple solution to incorporate manageability, flexibility and scalability into high-density fibre channels. It is where the horizontal cabling of all infrastructure is integrated. Fibre optic distribution frames enable the transmitted data to reach its destination without any problems.
The fibre optic patch panel or enclosure can be used as a unit that allows administrators to terminate multiple cable elements while providing a secure and orderly chamber for splice units and connectors. It also helps limit wire clutter during installation. With the installation of a fibre optic patch panel, installations and repairs will be completed in a faster and more efficient manner.
MPO Patch Panel
The MPO Fibre patch panel, also known as a cross-connect distribution frame, can be compared to the nerve centre of a cabling network. It provides a very simple solution to incorporate manageability, flexibility and scalability into high-density fibre channels. It is where the horizontal cabling of all infrastructure is integrated. Fibre optic distribution frames enable the transmitted data to reach its destination without any problems.
The fibre optic patch panel or enclosure can be used as a unit that allows administrators to terminate multiple cable elements while providing a secure and orderly chamber for splice units and connectors. It also helps limit wire clutter during installation. With the installation of a fibre optic patch panel, installations and repairs will be completed in a faster and more efficient manner.
Features and Applications of MPO Fibre Patch Panel
Plug-and-play fibre cassette modules for MPO systems
Lightweight; easy to manage
1U, 2U, 4U options - all standard 19 rack mount MPO fibre panels
Re-lockable front panel with choice of connector types LC/SC/FC/ST
