Therapy of epidermis and dermis pigmentation
Utilizing the explosive effect of the Nd: YAG laser, the laser permeate the epidermis into the dermis which includes amount of pigment mass. Since the laser pulses in nanosecond but with super high energy, the shot pigment mass swell quickly and breaks into small pieces, which will be eliminated through metabolic system.
Therapy of the dilatation of capillary vessel
Utilizing the heat effect of the Nd: Yag Laser, the laser is absorbed by the hemachrome in the capillary vessel, then the capillary vessel become blocked and disappear.
Main curing principle of pigmentation is as follows:
Firstly, the laser acts on the target area, and penetrates the cuticle into the derma layer, then absorbed by the pigment.
Secondly, when the pigment absorbs very high energy in very short time, the pigment mass expands quickly and breaks into particles.
Thirdly, the particles are absorbed by phagocytes and finally excreted out from body.
Finally, Gradually the pigment becomes lighter and lighter till disappearing.
Main curing principle of vascular lesions is as follows:
Firstly, the fixed wavelength laser acts on the target tissues.
Secondly, by the thermal effect of the laser, the laser lights on the abnormal vascular.
Thirdly, after the hem chrome in the vascular absorbs the very high energy in very short time, it will concrete, and finally disappear.
Advantages
1. No harm to the hair follicle and normal skin, leaving no scar.
2. The latest hi-tech of laser explosion in a twinkling.
INDICATIONS
1. Dermis pigmentationú¼such as lentigines, blue or black tattooú¼eyebrow color.
2. Epidermis pigmentation, such as freckle, senior fleck and yellow, red, brown tattoo,lip color.
3. Short treating time and easy operation.
4. High quality controlled solid-state laser complying with international standard.
5. Tiny sense of pain, Anesthesia is unnecessary in most cases.
6. No downtime and interruption of routine activities, no side effect.
7. Extensive patient and fast return of investment.
Specifications
Light source: Q-Switch ND: YAG solid-state laser
Wavelength range:1064nm, 532nm
Energy level: 200-1000mj
Pulse duration: 8ns
Pulse rate: 1, 2, 5 Hz
Size: 680mmí-400mmí-820mm
Net weight: 75kg
Packing weight: 140kg
Power requirement:
AC110-240V, 10A, 50HZ
Sylustar CO2 fractional laser cosmetology system provides the most effective way to treat and improve skin condition, focus on the wrinkle, acne, chloasma, scar, slack skin and light aging skin. The ordered cone-shaped aperture with high energy contracts skin in a few minutes, which improves the skin effectively and promotes the generation of the new collagen in the deep layer.
Unique function
This therapy system is equipped with high speed scanner and high-quality unimodal laser, adopted advanced super pulse emission technology which can act upon the skin in very short time( Each laser point composed by numbers of laser pulses, the minimum laser pulse width is up to 0.1ms). Each laser pulse has a very high peak power, which has a strong stimulus effect to the tissues, therefore a single action point can reach the treatment effect by dozens of mJ energy. The conventional emission will require several hundred mJ energy, the heat damage is 5-10 times than the CO2 cosmetology system.
Compared with the Erbium laser (2940nm), this system has the merit of deep stimulate to the tissue and short treatment duration.
By using this therapy system, a whole facial treatment can be completed within 20-30 minutes. After the operation, people don't need particular vacation or rest, so it is also the most effective treatment program for office workers to obtain beauty as well.
This therapy system can bring remarkable and lasting effect after only one or two times treatments with little trauma and pain, as a result, it is applicable to everyone desiring for beauty.
Primary function
The cone-shaped apertures formed helps to contract skin surface.
To activate collagen hyperplasia, improve and keep skin tissue in a quite long time.
Therapy principle
This system adopts the scanning dot-matrix irradiation method which can form an ablated area composed of laser action points and lattice spacing on the epidermis, each laser action point is composed by a single or more high-energy laser pulses. The laser action points can directly reach to the dermis layer and form cone-shaped aperture. The laser can stimulate the proliferation and promote the restructuring of the collagen. The contraction of the cone- shaped aperture will obviously improve the skin voluptuous. Skin becomes smooth, elastic and gets a qualitative improvement.
Therapy characteristics
Short treatment duration, little hurt feel, without pigmentation and depigmentation when the spots distance is larger than 1mm, needs no additional cosmetics.
The effect of treatment keeps for many years for it can activate collagen hyperplasia. Especially, the effect is more obvious within several months after the treatment.
The Laser action point (Non-carbonated gasification point) is less than 10 percent of the whole treatment area, and will recover quickly. As the main treatment area remains intact during operation, the patients can use cosmetics at the second day after the treatment.
Scope of application
To eliminate the wrinkle, fine lines, scar, ease forehead wrinkle, to improve large pore, to thicken dermal layer.
To improve skin pigmentation such as chloasma, age pigment and freckles.
To treat the acne, verruca, naevus, etc.
To improve lighting aging skin.
Applicable groups
Office workers who bear heavy pressure without vacation.
Full-time housewives who keep tedious housework under tense rhythm of life.
All people desiring for beauty and youth.
Main technical parameter
Laser wavelength: 10.6ª¦m
Laser unit: TM00 module CO2 unit (Best quality for the facula)
Output power: Super pulse output 0.3-15W, peak value 450W
Continuous output 0.5-25W
Laser output mode: Continuous, Single pulse, Repeat pulse, Super pulse
Conducting system: Seven joints longer arculated arm
Therapy handpiece: With multiple function scanning generator, the single maximum scanning area could reach 20mmí-20mm.
Output Shape: Square, rectangular, round, oval
Operation mode: Controlled by a touchable screen and with the engineer interface and the doctor interface.
Min. Spot diameter: í_0.2mm
Pulse width: The minimum pulse width is 0.1ms
Power supply: AC 220Ví+10%/50Hz 5A
Principle of the therapy
Sylustar Bipolar Radio Frequency (MBRF) uses RF technology accompanied by infrared-assisted positioning and aspirating of the skin for wrinkle removal and skin tightening. High frequency wave permeates epidermis and take effect on the collagen-rich dermal tissue directly which makes water molecules in the skin move to and fro wildly. The heat generates and results in contraction of collagen and generation of new collagen and wrinkle renewal.
Treatment scope:
Face: Thin line, pouch, forehead wrinkle, cheek line, and wrinkle around lip, acne, neck line, double chin, skin-smoothing, deep & light wrinkle.
Chest: Enhance chest shape, breast-beautifying and chest- strengthening
Body: Arm, waist, abdomen, leg, pregnancy line, loose-skin tightening
Advantages
1, Bio-polar, Safe Device, cooling treatment handle pieces to protect the skin well.
2, Two handle piece for face and body. The spot size for body is 35mm*35mm and for face is 20mm*20mm.
3, Simple operation: Complete English designing makes operation clear and simple.
4, Safe and reliable: RF is a non-invasive, non-surgical, no scar, no bleeding, no downtime or recuperation way of treatment, which makes patients shape their charming figure and tighten their skin safely.
5, Special Effects: Effective wrinkle -removal, skin tightening, breast-beautifying and chest-strengthening have proved by clinical experiments
6, High-frequency electric wave, advanced and unique technology is used both in domestic and oversea markets
7, Simple maintenance: The RF machine is designed and made according to blocking technology.
Applications
a.Deep and light wrinkles eliminating
b.Improving skin-elasticity and skin-shine
c.Pregnancy line restoring
d.Skin-metabolism improving
e.Focusing Radio-Frequency, Immediate effect
f.Anti-aging for whole body
g.Divide bacterium and diminish inflammation
h.Improve pore-expanding body shaping
Specifications
Energy Source: Radio Frequency
Frequency Output: 10M Hz
Treatment model: bi-polair system, pulse and continuous mode,
Power input: 500W
Fuse Capacity: 10Az
Pulse duration: 1-5 seconds
Screen: 7.5 inch full ¿Ccolor touching display + Complete English Menu
Output Energy: 0 ¿C 50J (adjustable)
Temperature: 2-6oC
Voltage: AC 220V í+10%, 12A, 50Hz, AC110V í+10%, 12A, 50Hz
Dimension: 565(W) x 440(D) x880(H) mm
Net Weight: 41kg
Gross Weight: 70kg
Theory of PDT
As the most advanced technology, PDT beauty system using America original LED photobiology with the purity of 99% light acts on the target skin tissues to raise the activity of cell and improve the metabolism. No thermal effect, no injury and discomfort on the skin, which is not available for traditional skin care products.
Red light:
The red light absorbed selectively by the pigments and blood vessel can reach the result of skin rejuvenation, whitening, speckle and vascular removing, reducing acne and recovering the injured skin.
Blue light:
The blue light can inhibit the inflammation, kill acne bacillus so as to eliminate acne of the skin.
Mixed light:
The Mix light of red and blue can improve the microcirculation to irritate the fabric cellular to enhance collagen and elastic fibers production, reconstruct the dermis collagen fabric structure, eliminate fine winkles, enhance stretch facial skin and effectively alleviate symptom of laxity so as to change the roughness dark tone of facial skin.
Technical specification
Light source: LED
Pulse duration: CW
Red light Wavelength: 640nm
Output: 40W
Energy/power: 90mw/cm2
Luminous intensity: 10000~12000mcd
Output intensity: 90mw/cm2
LED head area (LxW): 180mmX50mm
Treatment time: 1-30minutes (20 m )
Blue light wavelength: 465nm
Output: 50W
Energy/power: 110mw/cm2
Luminous intensity: 10000~12000mcd
Output intensity: 110mw/cm2
LED head area (LxW): 180mmX50mm
Treatment time: 1-30minutes (20 m )
Cooling: air cooling system integrated into the system
Dimension: 630x245x560 mm
Head: 250*350mm
Weight: 12.5 Kg
Voltage: AC 220V, 12A, 50Hz, AC110V, 12A, 60Hz
Alloy with 0.05mm rhodium plated
Swarovski + cz stone
Nickle free
Moq - 60 pcs per style per color stone per plating.
Colour of stones have to be at buyer's specifications, subject to availability.
Features:
1) Sizes: 38*38*18cm
2) Function: handbag and shoulder bag
3) Printing: off-set printed
4) Materials: 160g PP material with OPP lamination
5) Patterns and colors can be changed according to customers' requirements
6) Customers' logos accepted
Glass Fountain with White LED
Glass Fountains are very soothing and relaxing to listen to. Glass water fountains are also very much admired by all and add beauty to your home or office.
