The MT-RJ uses an improved version of an industry standard RJ-45 type plug. This combination of a small form factor connector with the familiar RJ-45 latching mechanism ensures the MT-RJ connector to be the perfect choice for horizontal cabling needs to the desk-top.
The MT-RJ adapter occupies approximately the same space as a simplex SC adapter. An MT-RJ Adapter with SC style housing is also available for applications where SC footprint is required.
Pioneer in the technology of GSM sms alarm devices, legato possesses a team of expertise in engineering and programming of communication controllers.
GSM sms alarm messenger has been a success worldwide during the past few years. It is widely installed in control and alarm systems for industrial monitoring, power plant, water supply network, geographical control and security.
Temperature & humidity sms alert controller is dedicatedly developed for environmental monitoring and control. It sends sms alarm when temperature or humidity is higher/lower than user preset levels. More importantly, it provides the on/off control of equipments e.g. Air ventilation for maintenance in temperature/humidity range.
Application is unlimited where temperature and humidity needs to be monitored on site and remotely.
1: one cell lithium ion battery charger 4.2v/1.5a
2: two cell lithium ion battery charger 8.4v/500-2.0a
3: three cell lithium ion battery charger 12.6v/500ma-2a
4: four cell lithium ion battery charger 16.8v/2a
5: all kinds of power lithium battery charger 12v/5a, 24v/4a, 36v/5a-10a, 48v/10a
The in-line reactor can be scaled up to any power and size for different production capacity. Each reactor can be connected in series to achieve the designated power.
In-line reactor can increase the chemical activity during at cavitation process.
General Specification :
1) Output power : 1200W
2) Operating Frequency : 20KHz / 25KHz
3) Maximum fluid temperature : 100C
4) Maximum operating pressure : 5 bar
5) Maximum flow rate : 700L/hr/unit
PCUG - Series: Ultrasonic generator with digital current display and pulse sweep frequency adjustment for industrial cleaning and biodiesel production application. It can directly connect with our "PCUI" immersion transducers pack to form a power cleaning system OR biodiesel reactor to form biodiesel production system
General Specification :
Input: 120Vac / 220Vac, 50 / 60Hz
Output Power: 600W, 900W, 1000, 1200W, 1500W, 1800W
Output Frequency: 10KHz to 133KHz
Pulse Sweep Frequency : 0 ~ 20Hz
Feature :
1) Power Level Control
2) Pulse sweep frequency adjustment to improve cleaning effect.
3) Current Overload protection.
4) Thermal Overload protection.
5) Current indication.
6) Robust design and can be 24 hours continuously operation.
"DTC" Digital Thermostat can be used for heating and cooling application with following technical feature.
- High precision with 0.1C / 0.1F for better readability and market requirement.
- Wide temperature measuring range from -40C to +150C.
- High performance and durable thermoplastic materials housing.
- Water and humidity proof on front panel.
- High working temperature up to 70C ambient.
- Heating / Cooling control possible.
- Cooling control with auto or manual defrost cycling.
- Internal buzzer or output relay for alarm application.
- Configuration of parameter via smart card.
General Specifications :
Control temperature range : -40C ~ +150C / -40F ~ + 302F
Maximum ambient temperature : 70C
Input power : 12V~24Vac/dc, 120Vac, 220Vac, 50/60Hz
Input Sensor : NTC
Output Relay : 8A, 250Vac for heater / compressor
Mounting : Panel mount with locking clip.
Indication : 3 digits 7 segments Red LED with output function indication.
Control Accuracy : +/- 0.5% of FS
Indication resolution : 0.1C / 0.1F < 99.9C
Alarm : Internal buzzer or output alarm relay
Protection : IP65
Security : Password locking
PCB type Ultrasonic cleaning generator can be used with ultrasonic transducers to make a perfect ultrasonic cleaning.It is more compact, economic and space save design to fit both light duty and heavy duty cleaning system. It is very durable and can be continuously used for mass production even 24 hours operation. The generator can provide a timing feature, power adjustment, and sweep frequency feature.
Pcui immersible ultrasonic transducer pack can be used together with our "pcug" - series pulse sweep frequency generator to perform an ultrasonic cleaning equipment. It internally equipped with high power, durable blt transducers with hard chrome plating sonic surface on stainless steel housing to provide a ultra-long life feature.
The size and power of transducer pack can be custom made. Generally, the output power can be from 600w to 3600w with one or more frequency combination. The operating frequency can be offered from 25khz to 130khz.
Pwug: ultrasonic welding generator
Digital time setting ultrasonic welding generator can be used for plastic welding application. It is so simple and easy connection between generator and transducers.
The output power can be 1000w, 1500w, 2200w, 2600w, 3200w and 4200w. The general operating frequency are 15khz and 20khz.
Mylar polyester film capacitor---jfa series
Metallized polyester film capacitor---jfb series
Metallized polyester film capacitor (vac) ---jfc series
Box type met polyester film capacito---jfd series r
Mini met polyester film capacitor---jfe series
Mini laser met polyester film capacitor---jff series
Axial met polyester film capacitor---jfg series
Polypropylene film capacitor---jfk series
Met polypropylene film capacitor---jfl series
Box type met polypropylene film capacitor---tbd
X2 metallized polypropylene film capacitor---jfn series
Series polypropylene fim capacitor---jfp series
Box type double sided met polypropylene fim capacitor---jfq series
Radial & axial polystyrene film capacitor---jfr series
Motor starting capacitor---jfs series
