Find Verified Optical Fiber Cables Suppliers, Manufacturers and Wholesalers

Conductor: Plain annealed
Fire barrier: Mica Tape
Insulation: XLPE
Filler: Polypropylene yarn
Binder Tape: Polypropylene
Sheath : LSOH compound.

Handy Extension Wire for different kind of plugs. 2 meter wire.
Size :39x45x49
Volume :0.09 Cubic Metres
Weight :35.


Quantity Per Carton :200.

Invisible Fiber Optic Cable
Invisible optical cable is the abbreviation for transparent tight-buffered optical cable covered with hot melt glue. It is an optical cable composed of G657A1 G657A2 optical fiber, a transparent tight jacket layer, and a layer of hot melt adhesive. Each layer is extruded step by step using an extrusion process, with a nominal outer diameter of 1.2mm.



Characteristics:
1. Indoor wall tracking , invisible, look more neatly
2. Flexible TPU jacket , good to install in wall and roof
3. Bent insensitive fiber G657A1 / G657A2
4. Self adhesive , using hot gun to fix on the wall

Reliable Fiber Optic Solutions Provider
At Wirenet , we pride ourselves on being a trusted partner for businesses worldwide seeking reliable fiber optic solutions. With over 14 years of expertise and advanced manufacturing facilities, we deliver high-quality fiber optic products designed to meet the evolving demands of telecommunications, data centers, and industrial networks.

What Sets Us Apart as a Reliable Fiber Optic Solutions Provider?
Comprehensive Manufacturing Expertise

7,000m�² workshop for fiber optic cables and patch cords

2,000m�² connector and adapter workshop

1,000m�² PLC splitter production area

Fully equipped testing lab with advanced equipment to meet IEC international standards

Extensive Product Range

Short-Length FBG

Alxenses’s short-length FBG is fabricated based on advanced FBG fabrication technique and production facilities. The Bragg wavelength and length of the FBG can be controlled precisely while maintaining high reflectivity and side-lobe suppression ratio.

The standard length of short-length FBG is 3mm and can be customized to various lengths upon request. The short-length FBG allows smaller form-factor housing to be used for FBG packaging that is necessary when sensor size is a concern. Short-length FBG is suitable for building small sensors for temperature and strain measurements and compact sensor arrays for distributed monitoring applications.

Features:
•Short length
•Low insertion loss
•Multiplexing of FBG sensors in single fiber

Applications:
•Small form-factor sensor packaging


Note:

In general, the bandwidth becomes wider when the length of FBG gets shorter.

Chirped FBG (Fiber Bragg Grating)

Alxenses’s Chirped fiber Bragg grating is an in-fiber broadband reflective optical filter. Using advanced fabrication technique and production facilities, grating period and refractive index modulation depth along the length of FBG can be precisely controlled to produce chirped fiber Bragg grating with different spectral and dispersion characteristic. The broad bandwidth and customizable spectral shape of chirped fiber Bragg grating is particularly effective in gain and spectral flattening of EDFA or ASE optical source.


Features:
•Low insertion loss
•Customize reflection spectrum
•Wide bandwidth


Applications:
•ASE filtering
•EDFA gain flattening
•Broadband reflector for fiber laser
•Dispersion compensation

Applications:
10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm
Working frequency:
1-100mhz
Technical parameters:
Characteristic impedance: 100ía15ª+
Nominal velocity of propagation(nvp): 69%
Maximum dc resistance: 9.38ª+/100m
Maximum mutual capacitance: 5.6 nf/100m
Maximum capacitance unbalance: 330 pf/100m
Maximum resistance unbalance: 5%
Maximum propagation delay skew: 30 ns/100m
Maximum propagation delay: 536 ns/100m 100 mhz
Minimum bending radius: 10 x overall diameter
Voltage rating: 60v rms
Maximum pulling load: 80n
Working temperature: -20 íµ ~ +60íµ
Storage temperature: -5íµ ~ + 50íµ
Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc
& lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket)
Product highlights:
Provide excellent bandwidth beyond 100 mhz.
Designed for use in data and voice backbone application.
Meet the strict flame retardancy and environmental requirements in europe and us.
Easily identifiable color code for ease of installation.
Transmission properties:
Freq: 100
(mhz)


Roll, box, drum

Fbg (fiber bragg grating) array


Alxenses’s fiber bragg grating (fbg) array is produced using advanced fabrication technique to write many fbgs in a single strand of optical fiber without any splicing points. The mechanical strength of alxenses’s fbg arrays is therefore significantly better than fbg arrays produced by slicing many fbg arrays produced by slicing many fbgs together. The high quality fbg array with customized wavelength and spacing allow distributed measurement over long distance. Fbg arrays are particular suitable for large-scale sensing in strain, temperature or pressure monitoring in oil, gas, civil engineering, aviation and marine industries.

Features:
•low insertion loss
•spliceless fbg array
•customized fbg array configuration
•accurate fbg wavelength and reflectivity

Applications:
•large-scale strain and temperature monitoring in oil, gas, civil engineering, aviation and marine industries.

Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.


Roll, box, drum

í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.


roll,box,drum

One-Stop Fiber Cabling Service Provider
At Wirenet , we are proud to be your one-stop fiber cabling service provider, offering end-to-end solutions that simplify the complexities of fiber optic network design, installation, and integration. With over 14 years of experience in the fiber optic industry, we are committed to delivering high-quality, cost-effective, and future-ready solutions tailored to your specific needs.

Comprehensive Fiber Cabling Solutions
Our expertise spans the entire fiber cabling ecosystem, from design and build to network integration. We provide:

Indoor and Outdoor Fiber Optic Cables: High-performance solutions for versatile applications.

Fiber Optic Patch Cords: Customizable lengths and connectors for seamless connections.

Fiber Termination Services: Ensuring clean and efficient signal transmission.

Fiber Distribution Units (FDUs): Simplifying management of fiber optic networks.

Fiber Splicing (Fusion and Mechanical): Precise and durable connections for uninterrupted data flow.

Testing and Certification: Comprehensive quality assurance to meet industry standards.

Reliable Fiber Optic Solutions Provider
At Wirenet , we pride ourselves on being a trusted partner for businesses worldwide seeking reliable fiber optic solutions. With over 14 years of expertise and advanced manufacturing facilities, we deliver high-quality fiber optic products designed to meet the evolving demands of telecommunications, data centers, and industrial networks.

What Sets Us Apart as a Reliable Fiber Optic Solutions Provider?
Comprehensive Manufacturing Expertise

7,000m² workshop for fiber optic cables and patch cords

2,000m² connector and adapter workshop

1,000m² PLC splitter production area

Fully equipped testing lab with advanced equipment to meet IEC international standards

Extensive Product Range

We offer a wide variety of fiber optic products, including:

Indoor and outdoor fiber optic cables

Fiber optic patch cords

Fiber optic connectors and adapters

PLC splitters

Fiber distribution systems

Commitment to Quality and Performance

Our products undergo rigorous testing to ensure reliability, durability, and compliance with international standards. From tensile strength testing to temperature resistance checks, every product is built to perform in the most demanding conditions.

Customer-Focused Solutions

Understanding that every network is unique, we provide customized fiber optic solutions tailored to your specific needs. Whether itâ??s a small-scale project or a large infrastructure deployment, we deliver solutions that work for you.

Global Reach and Local Expertise

With a strong presence in North and South America, South Africa, the Middle East, and Southeast Asia, we understand the specific challenges of different markets and offer solutions designed to excel in diverse environments.

Fiber Optic Infrastructure Solution
At Wirenet , we specialize in providing comprehensive Fiber Optic Infrastructure Solutions tailored to meet the evolving needs of global telecommunications and networking industries. With 14 years of experience and state-of-the-art manufacturing facilities, we are your trusted partner for reliable, high-performance fiber optic products.

Why Choose Wirenet for Fiber Optic Infrastructure Solutions?
Extensive Manufacturing Capabilities

7,000m² fiber optic cable and patch cord workshop

2,000m² fiber optic connector and adapter workshop

1,000m² PLC splitter production area

Fully equipped fiber optic testing lab with IEC-compliant testing equipment, including high and low-temperature test chambers and tensile test machines.

Comprehensive Product Range

Indoor & Outdoor Fiber Optic Cables: Designed for durability and high performance across various environments.

Patch Cords: Customizable to suit any network infrastructure.

Fiber Optic Connectors & Adapters: Precision-engineered for seamless connectivity.

PLC Splitters: Reliable solutions for signal distribution in FTTH networks.

Fiber Distribution Systems: Scalable solutions to support your growing network.

Global Reach, Local Expertise

With a strong presence in North & South America, South Africa, the Middle East, and Southeast Asia, our solutions are trusted by customers worldwide. We understand the unique challenges in each market and provide customized solutions to address specific pain points.

MPO Fiber Optic Cable
MTP MPO fiber optic cable provide the higher bandwidth needed for HD conferencing and HDTV configurations. We offer MTP fiber optic cable in a variety of types and lengths; MPO stands for "Multi-Push-On-Over-Optical"; MPO fiber optic cable have a higher port density, and are available in a wide range of sizes.

MTP multi-fiber cabling system is ideally suited for a high density environment that demands space saving and innovative cable management solutions; MTP supports various connections from multi-fiber to single fiber out.

MTP (male or female) - MTP (male or female) OM4 12 strands Multimode ,LSZH jacket,Polarity B

4port USB Gigabit Network server


style NO. SK-304U

Functions:
share the printer/scaner/copy marchine/CD room-
by the local area network,
just like the computer server functions,
it is usefull for the small office and home works.

Application Note
USB Server Quick Start Guide
Features
.. 10/100/1000M RJ45 Ethernet
.. USB1.1/2.0 High Speed Specifications compliant
.. Supports High-Speed 480 Mb/s, Full-Speed 12 Mb/s, -
& Low-Speed 1.5 Mb/s
.. Supports USB Printers, USB Scanners, USB HDDs, -
USB Pen Drives G�ªG�ª
.. Shares USB Devices among Wired or -
Wireless Network Users by connecting network via Wireless Router
.. Supports IEEE 802.3 10Base-T ,
IEEE802.3u 100Base-TX and IEEE 802.3ab 1000Base-T
.. Supports Auto-MDIX, Auto Crossover function
.. Supports DHCP IP Address auto-configuration,
or Manual-Set Static IP ***** Supports TCP/IP, UPnP, WSD

.. Support Utility Software Web-based UI-



Management Utilities Setup,
Administration Password &
Connected Devices Status Monitoring ..
Drivers support Windows XP, Vista
.. Supports Bonjour for MAC OS X or above
Package Contents
.. 1 x USB Server
.. 1 x Network Cable
.. 1 x CD (Drivern+�User Manual)
.. 1 x Power Adapter
Hardware Installation
Please connect your USB Server device to-
your router/switch as shown above
and power it on. Connect your USB device to it.
If your USB device needs to be
powered on as well, please do not forget to do so.
Now you are ready for software installation.
Please read on.

Software Installation
1. To start the installation process,
please double click on the installer.
2. Then the installer will install -
the necessary software on your PC.
3. When the automatic installation process completes
An application shortcut will be installed on-
the desktop of your PC:
Please double-click on the short-cut to-
start the application.
Using the USB Device
1. Once the utility starts up,
click to high-light the USB device you would like
to use and click on the Connect Device button.
2. Once connected,
you can see the device status changed to indicate
connection has been established

3. The flash drive connected as an -
example then can be used as if it is
plugged into your PC via the USB port.
4. Any USB device connected via USB Server-
utility should work as if they
are plugged into the connecting PC via USB port.
5. Devices could be in any of the 3 following status:

This status icon indicates that the -
device is now free for connection.
You can connect this device and use it.

This status icon indicates that-
the device is connected by you.
This status icon indicates that-
the device is connected by other
users. You may NOT connect to it-
until the device is free again.
6. To release a connected device,
just select the device and click on the
Disconnect Device button.


gift