Zonel Filtech as one of the most professional filter materials manufacturers whom equipped with most advanced projectile looms and the finish treatment machines whom can offer the full ranges of screen meshes / bolting cloth for different industrial occasions for various usages.
Product range:
Polyester bolting cloth for printing and general filtration;
Polyester flour meshes;
Polyamide/nylon bolting cloth for printing and general filtration;
Polyamide/nylon flour screening meshes;
PP filter mesh/PP screen meshes.
Mesh opening: 25 ~ 1800micron
Width: within 3.6meters can be customized.
Ck777d
Brief intro:
Dedicated infrared heating with strong penetration capability in evenly heated parts. A breakthrough over disadvantages from traditional hot air desoldering station which covers elements when heating, causing higher thermal impact.
Features£º
-esd safe unit
-led temperature display
-infrared desoldering technology through independent development and research.This machine can desolder all components in 15-45 mm size.
-infrared heating and desoldering twice faster than hot air gun, greatly reduce heat damage rate on device
-infrared heating has no hot air flow and will not affect the surrounding small components. It is applicable to all small components especially micro bga component.
-lamp handle is installed with sensitive magnetic sensor. When lamp handle is held down facing floor, system is directly set to work mode. When it put back to handle bracket (on position), system is automatically set to standby mode, it is convenient for real-time operation.
-can be integrated with our 853 series preheating station which has 500w heating system and preheating area of 120 mm in width and 120 mm in height.
-warranty: 1 year parts and labor. Please contact us for claims or damaged or missing parts (accessories) within 7 days from date of purchased
Specification:
Current voltage(ac):220 + 10%
Current overload protection: >= 6a
Power consumption:180 w
Infra red temperature: 200-380 c, adjustable
Dimension£º31.2*28*15.5cm
Weight: 3.6 kg
Pc/ctn£º6
Package contain:
Rework station 1
Lamp handle 1
Handle bracket 1
Two-core power cable 1
User manual 1
Warranty card 1
Dimension£º31.2*28*15.5cm
Weight: 3.6 kg
Pc/ctn£º6
- esd safe unit provides extra safety for sensitive component
-combination of hot air rework station and soldering iron.Each part work individually.
-it has three knobs which control hot air volume, hot air temperature, and soldering iron temperature. The hot air volume knob has 8 shifts, which provide option on air flow speed and volume for different use .
- soldering iron use light weight handle design, suitable for use a long time.The soldering iron can be unplugged or plugged easily
- the mode and specification of iron and heating element are same as any international brand name, so they can be exchanged very easily.
- high quality ceramic heating element, it can accurately control the temperature, also can rise the temperature to a high level in a very short time.
General specification
Current voltage(ac);220 + 10%
Current overload protection : >= 4a
Hot air station
Power consumption:270 w
Hot air temperature: 100-420 c, adjustable
Output airflow: 0.3-24l/min, adjustable
Pump power£º45w
Heater: 250w metal
Type of pump£ºmembranous
Soldering station
Power consumption:60 w
Output voltage (ac) : 24v
Soldering temperature : 200 - 480 c, adjustable
Heating element : ceramic heater
Dimension£º33*27.5*20cm
Weight : 2.95 kg
Pc/ctn£º6
CNC Rail profile grinding machine
This rail profile grinding machine is mainly used for forming and grinding operations of railway rail welding joints and rail surface repairs. The development and application of the CNC feed unit realizes the intelligent control of the grinding wheel feed. Significantly improve the profiling accuracy and polishing efficiency.
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.
Solution for Automotive Wiring Harness
With years of experience in wire harness manufacturing, Kinkong Wire Harness can provide complete solutions for a wide range of different applications in the automotive industry. We produce wiring harness for engine, light & lamp, sensor, ignition coil, accelerator pedal, fuel injection, car radio, chassis, etc, but not limited to the above mentioned. Weâ??re looking forward to getting inquiry from you.Ã? Click hereÃ? to find out more.Ã?Â
Overview
Kinkong Wire Harness is a derivative brand of KINKONG, mainly focus on the custom wire harness assembly and over-molding service for after-market and tuning-market in the vehicle industry, including cars, motorcycles, racing cars, agricultural machinery, mining machine, ATV, superbikes, scooters, e-bikes, sea-doo, Can-Am...
We began from very small pigtail harnesses and have grown to be a very specialized and quality-ensured wiring manufacture for more intricate wiring harnesses, from auto lamp harness, engine harness, to chassis harness, and all the customized harness if needed.
Our mission is to provide our customers with super qualified products & services with a low total cost of ownership to help our customers gain a big advantage in this cut-throat competitive contemporary world. To ensure the quick turn around time, we make huge stock of connectors, terminals, wire seals, wires, PVC, clips...at all times to react quickly. We even have our own tooling workshop and 3D prototyping technology to make custom components, which better assists the custom wiring process.
Wiring harness assembly is typically done manually due to the many different processes involved, so we have abundant skillful workers and crafts in our factory.� Additionally, weâ??re increasing the automation facilities, such as automatic cut, strip, terminate, etc. machines to fulfill semi-automation production aiming to improve productivity and shorten� lead time.
Wire Harness Manufacturers China is a reliable supplier of automotive connectors, housings, housings, terminals and silicone rubber seals, fuse boxes and entire wire/cable assemblies. Harness Supplier provides Custom Cable Solution.
