Mylar polyester film capacitor---jfa series
Metallized polyester film capacitor---jfb series
Metallized polyester film capacitor (vac) ---jfc series
Box type met polyester film capacito---jfd series r
Mini met polyester film capacitor---jfe series
Mini laser met polyester film capacitor---jff series
Axial met polyester film capacitor---jfg series
Polypropylene film capacitor---jfk series
Met polypropylene film capacitor---jfl series
Box type met polypropylene film capacitor---tbd
X2 metallized polypropylene film capacitor---jfn series
Series polypropylene fim capacitor---jfp series
Box type double sided met polypropylene fim capacitor---jfq series
Radial & axial polystyrene film capacitor---jfr series
Motor starting capacitor---jfs series
Product Name:Picnic Bag
Item No.:ML05009
Fabric: 600 deniel polyester red color, with black color match lining.
Dimensions:30x21x40 cm
4x goblet
1x bottle opener
4x napkin
4x spoon/knife/fork
4x melamine plate
2x salt&pepper
1x cutting board
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.
Reference Standard: CW1198
Application: This cable is used for communication and telephone systems, distribution cabling and direct buried.
Conductor Material: Solid plain annealed copper referred to BS6360
Insulation Material: Cellular High Density Polyethylene
Laying-up: Pairs; Units
Wrapping: Polyester Tape
Filler: Petrolatum Jelly filled
Screen: Aluminum foil with overlapping
Bedding: Polyethylene.
Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.
Application: Power limited circuit, remote control, signaling, security systems, communications, intercom/P.A. systems, sound/audio, and nurse call.
Conductor Material: Bare copper wire strands
Insulation Material: PE/PVC
Laying-up: Units
Drain Wire: Solid bare copper
Shield: Overall Al/Polyester foil shield
Nylon Rip Cord: 150D
Sheath Material: PVC/LSF/PE
Sheath Color: As your request
Shape: Circular in cross-section
Voltage Rating: 300/500 voltage
Temperature Rating: 75íµ
Fire Performance
Flame Propagation Test to IEC 60332 Part 1 and Part 3
Determination of the amount Halogen Acid Gas to IEC 60754 Part 1
Smoke Density Test to IEC 61034
Oxygen Index Test to BS 2863 or ISO 4589-2
Temperature Index Test to BS 2782 or ISO 4589-3
Fire Resistant Test to IEC 60331-24.
16 Polyester Yarn Suppliers
Short on time? Let Polyester Yarn sellers contact you.
