1.Specialize for gift wrapping, flower & plant packaging, promotion, shopping etc.
2.High quality, competitive price, punctual lead time, good after sale service
reinforced bottom board
Folded in turn-top
Folded out turn-top
Finishes/coatings:
Gloss laminated/matte laminated/gloss varnish/matte varnish/uv spot varnish
oses only.
If colour is important and for further information, pls be free to contact us
1.Specialize for gift wrapping, flower & plant packaging, promotion, shopping etc.
2.High quality, competitive price, punctual lead time, good after sale service
3.Customized sizes, colors and designs can be available
Glass jars
We are one of the leading exporter of a wide variety of glassware with good reputations. Our factories have more than 1800 workers and 20 years of glassware manufacturing experiance, producions follow the iso 9001 quality standardization. Product lines include all series of jars, glass, cups, flask etc. Please visit our website: arkcreation.Com and do not hesitate to contact us for detail information.
Glassware
We are one of the leading exporter of a wide variety of glassware with good reputations. Our factories have more than 1800 workers and 20 years of glassware manufacturing experiance, producions follow the iso 9001 quality standardization. Product lines include all series of jars, glass, cups, flask etc. Custom decal printing service is available. Please visit our website: arkcreation.Com and do not hesitate to contact us for detail information.
Product characteristics:
The highly active Zinc powder produced by our company has some characteristics of high contain of Zinc, low impurity elements, smooth surface, large surface area, small density of loose-powder, little oxide on surface, melting deformation and little grape shaped particles after sticking, average particle diameter is 0.1-4¦Ìm, total Zinc contain is more than 98.5%, metal Zinc contain is more than 96%.
Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.
Product Property:
Molecular formula: Zn
Molecular Weight: 65.38
Physical Property: light grey metal fine powder.
Density: 7.14g/cm3
Melting Point: 419.4¡ãC
Boiling Point: 908%
Chemical property: insoluble in water, soluble in acid and alkali, slowly soluble in acetic acid, ammonia water, it has strong reducing performance and give out hydrogen. Lumps when being wet, keeps stable in dry air and generates white basic carbonate covering in its surface in wet air. When combusting in the air, it can generate blue green flame and generate zinc oxide. High pure zinc act slowly with sulfuric acid and nitric acid, while act fast when it contains few of other metals such as steel, tin and lead.
Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.
Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.
Here belowed is the scope of our products
Steel shot: s70 s110 s130 s170 s230 s280 s330 s390 s460 s550 s660 s780
Steel grit: g10 g12 g14 g16 g18 g25 g40 g50 g80 g120
Steel cut wire shot: 1.0mm 1.2mm, 1.5mm, 2.0mm
Stainless steel cut wire shot, 0.3mm, 0.4mm, 0.5mm, 1.6mm, 0.8mm, 1.0mm
Steel abrasives are used to clean a wide variety of surfaces and parts, for example
De-sanding and cleaning foundry castings
Descaling metal sheet, billets and profiles produced by the steel industry
Surface preparation prior to coating
Steel abrasives are used in the following industries and applications:
Foundries, metal producers, shot peening, surface preparation, general cleaning, granite cutting,
Chemical composition of the products:
C 0.70-1.20% mn 0.60-1.20%, si 0.40-1.20%.
Hardness:
Steel shot: 40-60hrc
Steel grit: 42-66hrc
Steel cut wire shot:1.0mm:51-53hrc ; 1.5mm:41-45hrc
Density:
Steel shot: 7.4g/cucm
Steel grit: 7.6g/cucm
Steel cut wire shot:7.8g/cucm
Microstructure: tempered marten site
High strength, long lasting ervin life: cast steel shot and grit: 2000 cycles;
Steel cut wire shot: 2800 cycles.
25kg in one bag, 40bags on one pallet, 20mt for each container
Commodity/Product: Electrolytic Copper Cathode Plates
Fineness: 99.99% Cu; but not lower than 99.97% (inferior quality to be rejected)
Quality: Non LME registered but in compliance with LME Grade A specifications
Origin: Democratic Republic of Congo
LME: London Metals Exchange (www.lme.com)
Physical Dimensions
Length 914 mm (LME standards)
Width 914 mm (LME standards)
Thickness 12 mm (LME standards)
Net weight per sheet 125 Kg (Approx.) (+-2%)
Net weight per pallet 2 Mtons (Approx.) (+-2%)
Net weight per container 20 Mtons (Approx.) (+-2%)
Gross weight per container 22,2 Mtons (Approx.) (+-2%)
Packing palletized banded by aluminum bands
Chemical Composition
Elements Value
Copper Cu 99.97% Min.
Cobalt Co 0.2 ppm Max.
Lead Pb 0.2 ppm Max.
Iron Fe 2 ppm Max.
Aluminum Al 0.5 ppm Max.
Manganese Mn 0.1 ppm Max.
Nickel Ni 0.2 ppm Max.
Antimony Sb 0.1 ppm Max.
Arsenic AS 0.1 ppm Max.
Silica Si 0.3 ppm Max.
Bismuth Bi 0.1 ppm Max.
Teleurium Te 0.05 ppm Max.
Silver Ag 10 ppm Max.
Selenium Se 0.3 ppm Max.
Sulphur S 4 ppm Max.
Magnesium Mg 0.4 ppm Max.
Argent Ag 10 ppm Max.
Zinc Zn 0.4 ppm Max.
Oxygen O2 0
We are Fortune trade development(HK)co., who trade Philippine and Indonesia coconut products since 2001.our main products are high-fat desiccated coconut,medium-fat desiccated coconut, low-fat desiccated coconut,coconut cream powder, coconut water.With years of development , we have been a main co partner of many well-known manufacturer such as PRIMEX,SUPERSTAR,FRANKLIN.and with years of professional experience we have sales network all over the world like China mainland, Europe,America,Middle east. Every month we trade about 40 containers DC. because of the big quantity we are doing, we can supply you coconut products with competitive price.
