Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.
í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.
Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.
Roll, box, drum
165 Electronics Suppliers
Short on time? Let Electronics sellers contact you.
Applications:
10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm
Working frequency:
1-100mhz
Technical parameters:
Characteristic impedance: 100ía15ª+
Nominal velocity of propagation(nvp): 69%
Maximum dc resistance: 9.38ª+/100m
Maximum mutual capacitance: 5.6 nf/100m
Maximum capacitance unbalance: 330 pf/100m
Maximum resistance unbalance: 5%
Maximum propagation delay skew: 30 ns/100m
Maximum propagation delay: 536 ns/100m 100 mhz
Minimum bending radius: 10 x overall diameter
Voltage rating: 60v rms
Maximum pulling load: 80n
Working temperature: -20 íµ ~ +60íµ
Storage temperature: -5íµ ~ + 50íµ
Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc
& lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket)
Product highlights:
Provide excellent bandwidth beyond 100 mhz.
Designed for use in data and voice backbone application.
Meet the strict flame retardancy and environmental requirements in europe and us.
Easily identifiable color code for ease of installation.
Transmission properties:
Freq: 100
(mhz)
DJI Action 2 isn't just ultra-versatile, it's also our most powerful action camera yet. The innovative magnetic design lets you effortlessly swap out accessories as you capture life on the go. From parkour to park walks, break the mold with DJI Action 2.
Our company involves Huawei, H3C, ZTE, Cisco, Polycom, Alibaba and other multi brand products. To provide you with Huawei voice communications, video conferencing, data communications, server storage, network transmission, wireless secure transmission access, UPS, cloud computing, worker intelligence and other Internet of things and Cisco switches, video conferencing, servers and other integrated solutions of the whole chain products. If you have any need, please contact me. Looking forward to cooperating with you!
All the products are shipped in one piece at Beijing and hongkong.
ZTE zxv10 T700 is an integrated HD video conference terminal launched by ZTE. It is simple to install and deploy, supports 1080p HD video and broadband voice, has excellent video and audio quality, stability and reliability, and can better meet the needs of small and medium-sized conferences and home users.
â?? high definition quality, delicate and smooth
ZTE zxv10 T700 integrated HD video conference terminal supports H.264 high profile, and can achieve resolutions of up to 1080p 30fps and 720p 60fps under 1Mbps bandwidth. The color is delicate and smooth, the timbre is clear and pleasant, and it is easy to share rich and colorful communication.
â?? maintenance free design, easy wiring
ZTE zxv10 T700 integrated HD video conference terminal has the characteristics of simple installation and convenient wiring. The simple and intuitive wiring mode makes the installation as simple as connecting household appliances, reduces the technical threshold for use and has lower maintenance cost.
highly integrated design and rapid deployment
The exquisite and compact design of T700 can realize a variety of shelves. You can choose the bracket hanging on the side wall, the bracket quickly fixed above the LCD TV, the bracket hanging on the top of the room, and select the appropriate backplane bracket to adapt to various room structures, so that you can realize rapid deployment.
â?? IP network adaptive management and differentiated services
ZTE zxv10 T700 integrated HD video conference terminal is compatible with IPv4 and IPv6 and has video and audio packet loss compensation, FEC and QoS network adaptation algorithms to ensure the smoothness of audio and video when the network packet loss reaches 10%. Using MTU adaptive, automatic speed up and down, NAT / FW traversal and other technologies, you can set the TOS and DiffServ of QoS, give priority to transmission according to the content category (video stream and file stream), fully adapt to network resources and provide you with the most stable guarantee.
Huaying Information Technology Co., Ltd. provides you with Huawei voice communication, video conference, data communication, server storage, network transmission, wireless security transmission access, UPS, cloud computing, worker intelligence and other Internet of things and Cisco switch, video conference, server and other full chain products integrated solutions. For details, please refer to .
