Find Verified Coir Fibers Suppliers, Manufacturers and Wholesalers

Product Name:Camping tent
Item No.:ML00002
Size: 250X150X105cm
Material:170T polyester 110g PE waterproof fiber glass tube dia 6.9mm
Packing:1pc/polyester bag

Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.


Roll, box, drum

Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.


Roll, box, drum

í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.


roll,box,drum

Application
These cables are designed for transmission of analog and digital signals, and the interconnection of electrical equipment and instruments, particular for the process control industry.
Conductors: Annealed solid copper(Class 1), stranded(Class 2), or flexible(Class 5) to BS 6360.
Insulation: PE/XLPE
Screen:
(Overall Screen)
(Individual Screen + Overall Screen)
(Overall Screen + Steel Wire Armour)
(Individual Screen+ Overall Screen+Steel Wire Armour)
Sheath Version: PVC/LSF/LSOH
Pair Identification:
a) Collectively screened cables: Color coded in accordance with Color Code as per BS5308 standard.
b) Individually screened pairs: One white core and one black core in each pair. Pairs identified by numbered screen isolation tape.

•spectral measurements of c&l-band dwdm passive components
•noise simulation in dwdm systems
•raman amplifier gain and gain flatness test.


Obtain a corrugated cardboard shipping carton with inside dimensions that are at least 3 in. (6.5cm) taller

HDMI to HDMI Cable (V 1.4)


This cable is based on new technology that gives you -
the best data transmission between your HDMI source and-
HDMI display unit. The five transmission pairs are with-
identical electrical characteristics that provides-
the best data transmission between devices.
Triple shielded cable with durable connectors has-
the best performance in maximize the data signal integrity,
EMS and worst installation environment.
With the ATC certification,
this cable is fully fulfilling the requirements and up to-
standard of HDMI organization.
All materials of the cable are 100% RoHS compliant and-
lead-free to protect our planet.

Features:
1íóHDMI Ethernet Channel ¿C Adds high-speed networking to an HDMI link,
allowing you to take full advantage of their IP-enabled devices without-
a separate Ethernet cable.
2íóAudio Return Channel ¿C Allows an HDMI-connected TV with-
a built-in tuner to send audio data "upstream" to a surround audio system,
eliminating the need for a separate audio cable.
3íóSupports 3D ¿C Defines input/output protocols for major 3D video formats,
paving the way for true 3D gaming and 3D home theater applications.
4íóSupports 4000X2000 Resolution ¿C
Enables video resolutions far beyond 1080p,
supporting next-generation displays that-
will rival the Digital Cinema systems used in many-
commercial movie theatres.
5íóAdditional Color Spaces ¿C
Adds support for additional color models used in-
digital photographyand computer graphics

User selection
1íówire
UL.VM-1, CL2, CL3, CMR, Teflon, LSOH
24-32AWG
2íóSurface Appearance
PVC moulding
Double-color PVC
ABS Shell
Zinc alloy / Aluminum alloy
Flat Cable
PVC moulding & Screw


gift box

Conductor: Plain annealed
Fire barrier: Mica Tape
Insulation: XLPE
Filler: Polypropylene yarn
Binder Tape: Polypropylene
Sheath : LSOH compound.

Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE

Applications:
10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm
Working frequency:
1-100mhz
Technical parameters:
Characteristic impedance: 100ía15ª+
Nominal velocity of propagation(nvp): 69%
Maximum dc resistance: 9.38ª+/100m
Maximum mutual capacitance: 5.6 nf/100m
Maximum capacitance unbalance: 330 pf/100m
Maximum resistance unbalance: 5%
Maximum propagation delay skew: 30 ns/100m
Maximum propagation delay: 536 ns/100m 100 mhz
Minimum bending radius: 10 x overall diameter
Voltage rating: 60v rms
Maximum pulling load: 80n
Working temperature: -20 íµ ~ +60íµ
Storage temperature: -5íµ ~ + 50íµ
Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc
& lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket)
Product highlights:
Provide excellent bandwidth beyond 100 mhz.
Designed for use in data and voice backbone application.
Meet the strict flame retardancy and environmental requirements in europe and us.
Easily identifiable color code for ease of installation.
Transmission properties:
Freq: 100
(mhz)


Roll, box, drum

Conductor: Plain annealed
Fire barrier: Mica Tape
Insulation: XLPE
Filler: Polypropylene yarn
Binder Tape: Polypropylene
sheath : LSOH compound
No. of Core Conductor Nominal Thickness of Insulation Nominal Thickness of Sheath Approx. Overall Diameter Approx. Weight
Size No/Dia. of Wire Approx. Dia.
mm2 No/mm mm mm mm mm kg/km
2 1.5 7/0.53CR 1.59 0.7 0.9 9.0 115
2.5 7/.067CR 2.01 0.8 1.0 10.5 160
4.0 7/0.85CR 2.55 0.8 1.1 12.0 220
3 1.5 7/0.53CR 1.59 0.7 1.0 10.0 140
2.5 7/0.67CR 2.01 0.8 1.1 11.5 195
4.0 7/0.85CR 2.55 0.8 1.1 12.5 265
4 1.5 7/0.53CR 1.59 0.7 1.0 11.0 170
2.5 7/0.67CR 2.01 0.8 1.1 12.5 240
4.0 7/0.85CR 2.55 0.8 1.2 14.0 335 .

Note: CR = Circular stranded conductor .

Reference Standard: CW1198
Application: This cable is used for communication and telephone systems, distribution cabling and direct buried.
Conductor Material: Solid plain annealed copper referred to BS6360
Insulation Material: Cellular High Density Polyethylene
Laying-up: Pairs; Units
Wrapping: Polyester Tape
Filler: Petrolatum Jelly filled
Screen: Aluminum foil with overlapping
Bedding: Polyethylene.

Application
6181B is cord for use in machine tools and electrical appliances.
Conductor
Extra flexible copper conductor
Insulation
PE/XLPE insulation
Core
Single core and multi core conductor from 0.5-1000 mmsq
Armouring:
Armoured and unarmoured available
Jacket
PVC/LSOH/LSF.