Central loose tube cable contains one tube with 2 - 24 fibers, which is filled with water blocking gel. A water swelling tape is helically wrapped around the cable core. Either aramid yarn or fiber glass is wound around the tube to provide physical protection and tensile strength. The cable is jacketed with PE for water protection purpose. For direct burial, steel wire armour and corrugated steel tape armour are applied with an optional PE
Applications:
Long distance telephone, catv, data communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct
Burial (with armouring).
Construction:
The cable consists of a single tube containing 2 up to 24 fibers, which is filled with water-blocking gel. When the
Cable contains more than 12 fibers, they are divided in two groups. A colored thread identifies each group. Physical
Protection and tensile strength are provided by aramid yarn or fiberglass wound around the tube. Either pe or lszh
Jacket can be used. A ripcord is located under the jacket to facilitate jacket removal.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500n (short term installation); 900n (long term installation)
Maximum compressive load: 3000n (3.3mm loose tube diameter); 5000n (4.5mm loose tube diameter)
Twist (torsion length): 125 x overall diameter
Working temperature: -20íµ ~ +70íµ (pe sheath)
Storage temperature: -40íµ ~ +70íµ (pe sheath)
Product highlights:
Small diameter and light weight.
Through the control of the fiber exceed length which is the key technology in optical fiber manufacture, the fiber
Cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Compact construction of the fiber cores can prevent the fiber to shrink back. This can sustain higher tensile stress
And achieve better flexibility.
íewide operating temperature range.
Roll, box, drum
2621 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
í= Applications:
Short and medium distance, indoor and protected environments. Offered as a riser, plenum, or general purpose cable,
it is used for interconnection of distribution boxes, or the distribution boxes and customer equipments, and between
floors.
í= Installations:
Installed along the wall, the roof, interlayer, canal and indoor.
í= Construction:
The cable contains 4 to 72 fibers individually buffered to 0.9 mm in a tight or semi tight construction and coded. The
cable structure depends on the number of fibers: The 4 to 12 fiber cables contain individual fibers without sub-units,In
the 16 to 72 fiber cables the fibers are grouped in the sub-units. In the 4 to 12 fiber cables, the individual fibers are
stranded and protected by aramid yarn and a PVC or LSZH jacket. In the 16 to 72 fiber cables, the fibers are grouped
into sub-units which are laid helically along the cable axis. Each sub-unit contains 4 to 6 fibers, aramid yarn and a
PVC or LSZH jacket. The 72 fiber cable consists of twelve sub-units, nine of them are stranded around a central
element made of 3 sub-units.
í=Technical Parameters:
íe Maximum Transmission Distance: 6km (Single Mode); 0.3km (Multimode)
íe Maximum Pulling Load: 100N(Short Term Installation);60N(Long Term Installation)
íe Minimum Bending Radius:
Short Term Installation: 20 x Overall Diameter
Long Term Installation: 10 x Overall Diameter (Non-Armoured);
20 x Overall Diameter (Armoured)
íe Twist (Torsion Length): 125 x Overall Diameter.
íe Working Temperature: -10íµ ~ +70íµ (PE sheath)
íe Storage Temperature: -20íµ ~ +70íµ (PE sheath)
í= Product Highlights:
íe Small diameter and light weight.
íe The high tension characteristics of the aramid yarn serving as strength member
can offer good stability in the transmission performance.
íe Compact and flexible construction are especially suitable for indoor installations.
íe Tight Buffer fibers are made from fiber rods with good linearity and low extruding output. By careful calibration of
the vacuum pumping equipment, the uniformity of the outer diameter of the tight buffer fibers can be easily achieved
with excellent strip ability.
íe LSZH jackets can be offered for indoor application for which flame retardancy is required.
íe Cutting edge production equipment, good quality materials and optimized process ensure low induced attenuation
within the operating temperature range.
íe Fiber geometry are strictly monitored to ensure superior transmission performance.
Applications:
Long distance outside telephone, catv, data, communications.
Installations:
Installed in duct, self supporting (figure 8 self supporting or adss all dielectric self supporting) and direct burial
(with armoring).
Construction:
The cable consists of 5 to 36 elements stranded in up to 3 layers around a central strength member and bound in a
Jacket. The elements are usually fiber containing tubes. However, fillers are also used, when needed to preserve cable
Geometry. Two to twelve color coded fibers are loosely laid in each tubes filled with water-blocking gel.
Technical parameters:
Maximum transmission distance: 6km (single mode); 0.3km (multimode)
Maximum pulling load: 1500-2700 n (short term installation); 900-1500n (long term installation)
Minimum bending radius:
Short term installation: 20 x overall diameter
Long term installation: 10 x overall diameter (non armored); 20 x overall diameter (armored)
Twist (torsion length): 125 x overall diameter
Working temperature: -40íµ ~ +70íµ (pe sheath)
Storage temperature: -50íµ ~ +70íµ (pe sheath)
Product highlights:
All the fiber containing tubes are placed in concentric layers around the central member; through the control of
The twist length, the fiber cable can achieve better pulling load and operating temperature.
Tube materials are water resistant and can sustain high tension. Being filled with special water-blocking gel, the
Tube can provide water protection for the fibers inside the tube.
Central member, which is usually either made of dielectric frp, or solid/ stranded steel coated with polyethylene,
Are placed at the centre of the cables.
Applications:
10base-t, 100base-t4, 100base-tx, 100base-vg-anylan, 155mbps atm, 622mbps atm
Working frequency:
1-100mhz
Technical parameters:
Characteristic impedance: 100ía15ª+
Nominal velocity of propagation(nvp): 69%
Maximum dc resistance: 9.38ª+/100m
Maximum mutual capacitance: 5.6 nf/100m
Maximum capacitance unbalance: 330 pf/100m
Maximum resistance unbalance: 5%
Maximum propagation delay skew: 30 ns/100m
Maximum propagation delay: 536 ns/100m 100 mhz
Minimum bending radius: 10 x overall diameter
Voltage rating: 60v rms
Maximum pulling load: 80n
Working temperature: -20 íµ ~ +60íµ
Storage temperature: -5íµ ~ + 50íµ
Flame retardancy: ul 1581 (cm jacket); ul 1666 (cmr jacket); ul 910 (cmp jacket); iec 60332-1 (frpvc
& lszh jacket); iec 60332-1 & iec 60332-3c (lsfroh jacket)
Product highlights:
Provide excellent bandwidth beyond 100 mhz.
Designed for use in data and voice backbone application.
Meet the strict flame retardancy and environmental requirements in europe and us.
Easily identifiable color code for ease of installation.
Transmission properties:
Freq: 100
(mhz)
Rechargeable battery Li-ion polymer 120mAh
Charge voltage DC1.8V, Charge time 2~3 hrs
Standby time 150 hours
Output Power 0dBm (class II)
Power Consumption 30 mA
100uA standby
Dimension: 64 mm(L) 28.5 mm(W) 11mm(H)
Weight 55g (including battery)
Operating Temperature - 10~55 degrees C
Storage Temperature - 20~60 degrees C
Certification CE, FCC
Stereo MP3 player with earplug directly on the frame which can be moved back & forth
Dvd Player
Full compatibility: dvd, dvd+r, dvd+rw, cd, vcd, svcd, cd-r/rw, mp3, hdcd and picture cd
7 high performance 16:9 tft-lcd display
Slim design (height: 38mm) with 2 stereo speakers and headphone jack
Card-shape remote controller, audio and video input
Dolby digital (ac-3) decoding and dolby pro logic processing
Features
Long-time battery
Automatically identifies the disc
Program playback
Time search playback
Multi-languages osd
Zoom panning
Screen saver
Support 32 languages with subtitles
Support 8 languages with soundtracks
Parental lock
Support multiple view-angles
Packing
Unit size: 156 x 200 x 38 mm
Giftbox size(w x h x l): 312 x 86 x 302 mm
Giftbox g.W/n.W: 2.0/0.8kg
Carton size: 322 x 440 x 312 mm (5 pcs)
Carton g.W/n.W: 11.2/10kg
Features:
5 color tft display
Plays dvd/cd/cd-r/cd-rw/mp3 and jpeg compatible
Multiple subtitles/viewing angle
Slow/fast motion play
Zoom operation
Built-in stereo speakers
Lithium-ion rechargeable battery included
Composite video output
Optical audio output
Fcc approved and ul listed
Specifications:
Type: 5 tft lcd with dvd player
Compatible format: dvd/mp3/cd/cd-rw
Display area: 5 diagonal
Resolution: 336, 960 pixels
Video output: composite video out
Audio output: coaxial digital out , 3.5mm headphone jack
Speaker output: 2 x stereo speakers
Color system: ntsc/pal
Power supply: dc 7.4v ac adapter
Screen control: on screen display
Accessories included:
Full function remote control
Av cable & 110-240v ul adapter
Dc car charger
Stereo headphones
Lithium-ion rechargeable battery
Dvd/dvd+r/dvd+rw dvd-r/dvd-rw/mp3/cd compatible
Slot-in loading disc mechanism
Anti-shock function for mobile use
Stereo speaker
Long life 2.5-hour rechargeable lithium battery
Detachable battery pack
Dc 12v jack
Av input
Coaxial output
S-video output
Dolby digital 2 channel decoder
Wall mount function
Full function remote control
Mp3 player
Functions :
Support mp3 and wma music formats
Synchronal lyric display ( id3 )
Built-in fm tuner & recorder ( 828r only )
Voice recorder
A-b repeat
7-eq mode
Backlit lcd display
Usb connection to your computer
No usb device driver is required ( except for windows 98 )
Auto power off
Firmware upgradeable
Dimension : 85 x 32 x 21 mm
Weight : 45g
CD jewel box with single black tray
CD jewel box with double black tray
CD jewel box with single color/clear tray
CD jewel box with doubel color/clear tray
Could be loaded by auto-matic packaging machine