Find Verified Halogen Lights Lamps Suppliers, Manufacturers and Wholesalers

Light Coffee Capsules

Solar Wall Pack Lamp - SW03
Lumens: 700LM
Battery:
18650 3.7V/1200mAh
Solar Wall Pack Light features an all-in-one design. The solar panel, light engine and lithium battery are built into the LED fixture. Do not need for a power source, which eliminates the need for wiring and trenching. This lamp achieves high lumens to ensure the brightness that give feeling of happiness, comfortability and safety. It comes with anti-theft screws to avoid being stolen and product is CE, RoHS, MSDS approval.
PIR sensor with motion distance: 4~6 meters.
FOB Shenzhen, China
42 units per Crtn.
14288 units per 20Ft container
24493 units per 40Ft container

LED and free maintenance explosion-proof
project/spotlight lamp
80~150W, Lens
Protection grade: IP66
Anti corrosion grade: WF2
Ex-proof grade: Ex d IIC T6 Gb

PP reprocessed pellets Light Green
Little bit translucent, can be use for light color products
Mfi 8

LY-ST30030 - Solar LED Street Light

Suitable for the street lighting; sidewalk lighting;roadway lighting; fence lighting; pathway lighting; campus lighting; park lighting; garden lighting;ramp lighting;boat dock lighting; remote area lighting;farm & ranch lighting.

The intergration of design ,no cable,the installation is very convenient. Fully-digital and high-precision constant current control boasting an efficiency of up to 96% The Mono-crystalline solar panel,LED lights,lithium battery,intelligent controller integrated Aluminum Alloy shell. True constant current rather than current-limiting control ensures smooth and stable output current, effectively reducing LED light attenuation and extending LED service life. When the products with optically controlled microwave induction infrared sensor, automatic adjustment of intelligent power on rainy days, extend rainy days. It used of alloy material as the main structure,with good rust prevention,corrosion protection. A metal case and an IP66 waterproof level enable the device to operate in various kinds of tough conditions. The wireless remote control setting device,adjustable lighting time ,lighting power ,automatic detection of battery voltage,read light power parameters,a human body induction function,as long as people go through when full power lighting,no automatic power down alf, restore energy saving mode. Time control + light sensor control+ motion sensor control Motion and light sensor built in:solar street light goes on at dusk at 20% brightness(Brightness adjustable). Can go from 20% power to full brightness when motion is detected. Three Intelligent Modes: Bright / DIM / Recharge. Bright: motion activates for lighting when motion is detected for security light and to save battery; DIM: 20% lighting for saving power when no motion; Off/Recharge: automatically turns off in daylight and goes into recharge mode. (working mode can be adjusted according to client's demand).

HZ-P10 - Portable UV Sterilizing Lamp with Ozone
Dimensions: 53x160cm
Material: ABS+PC+Iron rated power is 2.5Watt
Voltage: 5V
Battery capacity: 1200mAh
Wavelength: 275+395nm Sterilization
Type: Ozone and UV
Recommended place of use: Luggage, Washing machine, Wardrobe etc.
Carton size: 405x388x238mm 30pcs/ Carton GW: 10Kg

HD-FL02-1250WA-V-CD - LED Flood Light (high mast)
Model Serie: 250W - 1250Watt
LED FLOODLIGHT: Special lighting for wharves, stadiums,squares and other large places.
IP66 qualified
Adjust the angle of each mold without tools· Replace each mold without tools No screws appeared on the front view · High-end industrial design brings a more dramatic impact.
Specs sheet available on demand.

Street lighting, 90watt, from 93rmb, FOB Shenzhen, China.

CATEGORY
Bag Making
Manufacturer
Gutenberg
MODEL
MB 550 TL
SIZE
550 mm.
YEAR
2022

DESCRIPTION:
Block bottom MASTER BAG 550 Carrier Bag Machine
working from the roll, In-line twisted loop handle attachment unit, For twisted paper handles
Paper bag cutting length (C) 380-650mm
(380-770mm)
Paper bag width (W) 220-540mm
Paper bag bottom width (H) 80-250 mm
Paper thickness 90-170g/m2
Max. Paper bag speed 120pcs/min
Paper roll width 630-1510mm
Paper roll diameter Dia1200mm
The inner diameter of the paper roll Dia is 76mm
Handle rope height 110-120mm
Handle rope diameter Dia4-6mm
Handle sheet length 190.5mm
Handle sheet width 80-100mm
Machine supply 380V, 50Hz, three-phase, four wires
Power 39KW
Weight 20000 KGS
Dimension L14000*W6000*H3100mm
PLC Yaskawa Japan
Servo Motor Yaskawa Japan
Servo Driver Yaskawa Japan
Cylinder AirTac Taiwan
Low Voltage Electrical Apparatus Schneider Germany
Normal Button Schneider Germany
Emergency Button Schneider Germany
Bearing NSK Japan
Solenoid valve AirTac Taiwan
Photoelectric Eye Color Code Tracking SICK Germany

CATEGORY
Bag Making
MANUFACTURER
Tokyo
MODEL
Tokyo Pack
SIZE
530x350 mm.
YEAR
1988


DESCRIPTION:
- Reel fed
- Flat handle unit
- In-line 3 colors printer
- Concealed handle
- Refurbished in 2007
- Bag width: 220~350mm
- Bottom width: 60~180mm
- Cutting length: 250-520mm-
- Diameter of rope handle: 4mm
- Length of handle strip 308mm
- Dimension of patch paper: 190 x 50mm
- Reel width: 1,050mm
- Reel Diameter: 1,100mm
- Cold glue application
- Machine speed: ~170 bags/min

CATEGORY
Bag Making
MANUFACTURER
Gutenberg
MODEL
MB 550 TL
SIZE
550 mm.
YEAR
2022

DESCRIPTION:
Block bottom MASTER BAG 550 Carrier Bag Machine
working from the roll, In-line twisted loop handle attachment unit, For twisted paper handles
Paper bag cutting length (C) 380-650mm
(380-770mm)
Paper bag width (W) 220-540mm
Paper bag bottom width (H) 80-250 mm
Paper thickness 90-170g/m2
Max. Paper bag speed 120pcs/min
Paper roll width 630-1510mm
Paper roll diameter Dia1200mm
The inner diameter of the paper roll Dia is 76mm
Handle rope height 110-120mm
Handle rope diameter Dia4-6mm
Handle sheet length 190.5mm
Handle sheet width 80-100mm
Machine supply 380V, 50Hz, three-phase, four wires
Power 39KW
Weight 20000 KGS
Dimension L14000*W6000*H3100mm
PLC Yaskawa Japan
Servo Motor Yaskawa Japan
Servo Driver Yaskawa Japan
Cylinder AirTac Taiwan
Low Voltage Electrical Apparatus Schneider Germany
Normal Button Schneider Germany
Emergency Button Schneider Germany
Bearing NSK Japan
Solenoid valve AirTac Taiwan
Photoelectric Eye Color Code Tracking SICK Germany

a turnkey solution for your Paper bag business

Shipping
Providing you with a professional container logistic service worldwide

Insurance
covers damages for cargo. Risks covered. Loss or damage during end-to-end transportation

Installation:
10 days installation, running-in and training.

REFERENCE
FH-43
CATEGORY
Converting Equipment
MANUFACTURER
Gutenberg
MODEL
FH-43
SIZE
2450x1700 mm.
YEAR
2021

DESCRIPTION:
This machine is especially suitable for being applied in shopping bags.
A Paper bag handle making machine is applied to produce many types of paper bags with flat handles, such as food paper bags, shopping bags and so on.

Technical Data
Handle Width (T) : 12/15 mm
Handle Height (H) : 100 mm
Handle Distance (D) : 108 mm
Paper Sheet Width (W) : 40 mm
Paper Sheet Length (L) : 152/190 mm
Paper Sheet Weight : 80-140 g/m2
Paper Bag Width : 250-450 mm
Paper Bag Height : 250-450 mm
Bag Blank Mouth Width : =130 mm
Machine Speed : 33-43 pcs/min
Gluing System : Hot Gluing System
Machine Supply : 380V, 50Hz, 3 phase, 4 wires
Power : 12.2 KW
Dimension : L 7000 x W 2450 x H 1700 mm

Working Condition
Power : 3 Phases, 380V �±10%, 50 Hz
Compressed Air : Pressure: 0.6 MPa | Oil and Humidity: 8 mg/m3
Installation Height: Max. altitude: 1500 mm
Ambient Requirement: Relative Moisture: Max. 65% when 40 C | Temperature Range: 10~40 C

Gutenberg Flowers Kraft Paper Bag Making Machine

CATEGORY : Bag Making
MANUFACTURER : Gutenberg
MODEL : Flowers Kraft paper Bag Making Machine
SIZE : 33x15 mm

DESCRIPTION:
* Flowers Kraft paper Bag Making Machine

* Depending on your production needs V shaped bags, refer to the following related machine, we can provide you with the production of fully customized Flower Kraft paper Bag Making Machine .

* In the manufacture of V type bags provide bag making machine to clients for reference. You can propose your customized requirements

* Paper bag making parts

Bag length : 500mm
Bag width : 700mm
Paper thickness : 40-80g/m3
Paper making speed : 80pcs/min
Roller width : 700mm
Roller diameter : 1200mm
The inside diameter of Roller : 76mm(3)
Total power : 8kw
Machine weight : 2000kgs

Newlong Paper Bag Making Machine Flat STRAP (C) H JAPAN 2008

DESCRIPTION:

Newlong 2036TS 508HS
Year : 2008

bag making machines are designed specifically for high speed production of various sizes of single ply, side- seamed, gusseted SOS(self-opening square-bottom) bags in a one-line operation. The model numbers are specified by range of bag width.
The T-series features easy operator adjustments, quick size changes, smooth paper web flow to insure high speed operation, and the capability to run preprinted paper rolls. The TS model can be used for a gearless and shaft-less option run by servo-motors.
The 2036T model number specifies that it can run bags of widths between 200-360mm and can accomodate flat strap handles.

Category
Bag Making
Manufacturer
Gutenberg
MODEL
MASTER BAG SFT350
SIZE
1040x600 mm.


DESCRIPTION:
Technical Parameter

Paper bag width 180-350mm
Paper width 600-1040mm
Paper length 340-600mm
Bag bottom width 80-150mm
Paper thickness 120-200g/m2
Bag mouth fold width 40-60mm
Max. speed 40-75pcs/min
Twisted handle diameter 4-6mm
Handle patch length 152mm
Handle patch width 40-55mm
Handle Height(with sheet) 170-185mm
Patch paper thickness 120-150g/m2
Patch paper roll width 80-110mm
Power 22KW, 380V/50HZ
Weight 20000KGS
Dimension L15000*W5500*H3100mm
Power 3 phases, 380V±10%, 50 Hz
Compressed Air pressure: 0.6 MPa
oil and humidity: ?8 mg/m3
Installation Height Max. altitude: 1500 m
Ambient Requirement relative moisture: Max. 65% when 40
temperature range: 10~40

CATEGORY
Bag Making
MANUFACTURER
Newlong
MODEL
335T + 504TH
SIZE
280x540 mm.
YEAR
2008
AVAILABILITY :Immediately

DESCRIPTION:
Designed to manufacture self-opening square-bottom bags with twisted paper handles in a fully automated process, which is enabled by an Automatic Sheet Feeder and Twisted Paper Handle Making & Attaching Unit. Optional features, such as J-Cut Unit, Turn-top Device, Cardboard Device also available.
SPECIFICATIONS
STANDARD EQUIPMENT
Automatic Sheet Feeder Unit Handle Patch Making Unit Handle Patch Attaching Unit Tube Forming Unit
Tube Feeding Unit Bottom-Forming Unit Delivery Unit
BAG SIZES
With Handle
Tube length Bag width Bottom width
Top folding height
Without Handle
Tube length Bag width Bottom width
NOTE *
280 540mm 210 350mm 60 160mm
40 60mm
280 600mm 150 350mm 60 160mm
Handle-Centre Distance (Bag width + Bottom Width) shall be in-between 285 to 510 mm.
SHEET SIZE & WEIGHT
With Handle
Sheet width: Sheet length :
Without Handle
Sheet width: Sheet length
Sheet basis weight:
HANDLE & HANDLE PATCH
Sealing Method:
Patch Width:
Patch Cutting Length:
Patch Paper Weight: Patch Paper Roll Dia.: Patch Paper Roll Stand: Patch Paper Roll ID.:
Handle Height: Material of Handle:
MACHINE (Mechanical) SPEED

NEWLONG 1835ST+560SH

Description:
Sheet-fed type Shopping Bag Making Machine with Handle Making Unit and Handle Inserting Unit
For the production of Luxury Bags for high-grade goods, such as perfume, fashion goods, etc... with High speed and stable operation
Machine Construction
- Sheet Feeder
- Handle Making Unit, Type 560SH
- Handle Inserting Unit
- Tube Forming Unit
- End Press Unit
- Tube Feeder
- Bottom Forming Unit
- Delivery Unit
Specifications
Bag Size(mm)
Bag Width
Bottom Width Finished Bag Length Tube Length
Mouth Folding Overlap Width
for longitudinal pasting
Without Handle:180 to 350
:60 to 160
:210 to 555:280 to 600
:
:25 to 30
With Handle 180 to 350 60 to 160 210 to 495 280 to 550 30to50
25 to 30
*1) Handle Center Distance (Bag width plus Bottom width) is in the range of 240 to 510mm. *2) Bag Width and Finished Bag Length must be restricted depending on the bottom width.
*3) Min. Bag Width and Min. The bottom Width must be restricted depending on the distance between
handles.
Size of Handle Patch Paper Roll Paper Width
Maximum Roll Diameter Paper Weight
Paper Core Inner Diameter
Sheet Size(mm) Sheet Paper Width Sheet Paper Length Paper Basic Weight
:510 to 1050:280 to 650
:80 to 140 g/m2
510 to 1050 280 to 600
: 90 mm
: Max. 1,100 mm Dia.
: 100 to 110 g/m2
: 76 mm�? (3 inches)

Newlong Paper Bag Making Machine Flat Strap (C) H Japan 2008

Description:

Newlong 2036TS 508HS
Year 2008
bag making machines are designed specifically for high speed production of various sizes of single ply, side- seamed, gusseted SOS(self-opening square-bottom) bags in a one-line operation. The model numbers are specified by range of bag width.
The T-series features easy operator adjustments, quick size changes, smooth paper web flow to insure high speed operation, and the capability to run preprinted paper rolls. The TS model can be used for a gearless and shaft-less option run by servo-motors.
The 2036T model number specifies that it can run bags of widths between 200-360mm and can accomodate flat strap handles.

CATEGORY
Bag Making
MANUFACTURER
Newlong
MODEL
2036TS 508HS
SIZE
230x470 mm.
YEAR
: 2008

NEWLONG 638T+211FK

Description:
Designed to make the flat bottom bag width with or without gusset at high speed.

Max. Speed (double cut) Max. Speed (single cut) Cutting Length (double cut) Cutting Length (single cut) Gusset Width
Bag Width
Bottom Folding Width Flap Width
Paper Width
Paper Roll Dia Applicable Paper Weight
1,200 bags / min* 600 bags / min* 210 ~ 300 mm 310 ~ 620 mm Max. 140 mm 60 ~ 380 mm 15 ~ 30mm 7 ~ 20 mm Max. 1,060 mm Max. f1,300 mm 40 ~ 100 g/m2
Model
* This is mechanical speed and depends on bag size, paperweight and quality.
Major Components of Machine and Description
Paper Roll Stand
Longitudinal Pasting Unit
This is a stand for loading the web for making bags. Major equipment;
1. The paper roll is lifted up by means of a driving motor (0.75kw).
2. Max. paper roll diameter is 1,300mm.
3. Paper roll horizontal adjustment by a handle.
4. Switch box for paper roll lifting(Up-Down)
This is to seam paper web longitudinally for making a tube.
1. Paper web transfer roll
2. 1 set of pasting wheel and glue tank is provided.
3. Auxiliary web drawing unit with a differential device is provided

Forming Unit
Main Unit
The forming unit makes tubes with gusset from the web for making tube using the forming plate.
Major equipment;
1. A fixed forming plate for making 1 size of tube width is included.
2. Manual gusset depth adjustment
3. Nozzle type glue applicator.
This is the most important part of the machine and includes the input from the main motor and output to each component of the machine.
It also includes rollers that draw out tubes, a cutter that cut the tube into the specified length, and various devices that form the bag bottom.
The tube cutting length can be changed in the step of 10 mm by changing the change gears.
Major equipment;
1. Two sets of drawing rollers (Sandblast Type)
2. Rotary cutter with serrated edged or straight edges to cut tube
3. Pinch rollers and bag feed rollers accurately feed the cut tubes.
4. Creasing unit to facilitate bottom forming
5. Flat bottom forming binder to form flat bottom accurately
Bags transferred from the separating cylinder are held, gripped and by running delivery belt, and bags are transferred on the table.
1. Press delivery upper / lower belt
2. Counter to count the preset number of bags
3. Stacking table with conveyor belt.
Steps are provided for easy maintenance and operation, and safety covers are provided.
2 Color Inline Printer will be supplied with the following standard features.

Major equipment;
1. Operate in combination with 638T by direct drive.
2. Capacity of the printer (m/min.) will be suitable to take care in the speed of bag making machine, model 638T.
3. Anilox rollers and ink rollers for 2 colors.
4. Printing cylinders and printing change gears for 1 size for 2 colours
are provided.
5. Drying unit is provided.

CATEGORY
Converting Equipment
MANUFACTURER
Gutenberg
MODEL
MB-300
SIZE
3700x1800 mm.
YEAR : 2021

DESCRIPTION:
Ideal for producing mid-size and big-size paper bags fast

The machine is more convenient, more efficient, more stable, can produce a variety of different paper bags, leisure food bags, bread bags, dried fruit bags and so on environmentally friendly paper bag machine equipment.

Features
Roll Shafts Types: The feeding roller is air shaft: easy to lock the paper roller by air.
Type of Lifting: Rolling inflatable shaft with Hydraulic automatic feeding system: easy to change the paper roller.
Tension Control: The magnetic powder controller has fast response speed, high control accuracy, long life, and stable.
Tube Forming: The paper tube forming adopts an integrated tube forming adjustment structure.
Color Mark: Senor to achieve the automatic color mark position adjustment, adopts Germany brand SICK.
Bag Pressing Section: To make sure big size bag with good pressing and forming quality.
Touch screen: Touch screen easy for control.
Hydraulic System: Hydraulic system for sheet roller changing, saving time, and more easy work.
Driving Roller: Two driving roller, more power and stable, adopts Japan Yaskawa servo motor to control.
Cutting Station: High-speed uniform rotating cutter through a serrated knife or a flat knife, drive by Japan Yaskawa servo motor.
Collecting Station: Automatic collect the finished paper bag on online line, and you can set the number of one line on the touch screen.
Automatic Lubrication System: Automatic lubrication system for the whole machine.
Gluing: Automatic gluing system, adjust the volume of glue and location directly. With Energy-saving pressure rubber barrel, saving the cost.
The gluing holding bracket for adding the gluing, easier operate, donot need clean the gluing box when stop the machine.