Find Verified Gypsum Suppliers, Manufacturers and Wholesalers

Stainless steel fully welded roofing system is a high-end roofing solution based on stainless steel material characteristics and full welding process; stainless steel is resistant to ultraviolet rays, acid and alkali corrosion, and the full welding process eliminates splicing gaps, and the service life can reach more than 50 years.
The stainless steel welded roofing system welds the stainless steel roof panels that have been formed and buckled through special automatic welding equipment, realising the seamless connection between the plates and forming an overall closed roof structure.

Product Features
Spec/Typ 25/300 25/330 25/400 25/430 35/310 35/360 35/410
Material Ferrite 445J2 Austenite 304 Austenite 316
Thickness 0.5-0.6mm 0.5-0.6mm 0.5-0.6mm
Surface Finishing 2D2B2FPVDF Coating
Coating Fluorocarbon coating Polyester coating

The surface of the roof panel of the high level straight metal roofing system is straight and flat, which solves the problem of easy waves of the metal sheet surface, has a strong external effect, and improves the stability and wind resistance of the metal roofing system by improving the structure of the roof panel, using characteristic processes and methods, enriching the selection of plate types
The high flat and straight metal roof system has high flatness, strong layer appearance effect and strong self-buckling capability, improves the wind resistance and waterproof capability of the metal plate of the metal enclosure system, and solves the problem that the surface of the metal plate is easy to generate waves.
More about B&G Building

Tech-seam special seal is a 360 double-crimped fully supported roofing system, without the assistance of other waterproof filling materials. The roof panel rib is 360 folded with electric locking, and the folded roof is completely impermeable and waterproof. Tech-seam special seal has high ribs, which can improve the waterproof performance while also making the roof lines more obvious.

Product Features 

Spec/Typ 25/300 25/330 25/400 25/430 35/310 35/410
Material Al-Mg-Mn Alloy Steel
Stainless Steel Zinc-Copper-Titanium Copper
Thickness 0.7mm 0.8mm 0.9mm 0.5mm 0.6mm 0.5mm 0.6mm 0.7mm 0.8mm 0.6mm 0.7mm
Surface Finishing Mill Finished PVDF Coating Galvanizing AZ AZM PVDF Coating 2D 2 2F PVDF  Coating Pre-oxidation
Coating Fluorocarbon coating, Polyester coating Pre passivation

The Tech-zip II Wind Resistant Upright Hem Metal Roofing System is an upgrade to the traditional upright hem roof system. This series of panels has strong wind resistance, which is three times that of traditional upright hemming panels, and adds a waterproof rubber strip at the rib buckle position, which greatly enhances the waterproof and anti-seepage function of the roof panel.
The� Wind Resistant Roofing System is improved and upgraded on the basis of the traditional standing seam metal roof system, and its wind-resistant capacity is three times that of the traditional standing seam roof system of the same material.
At B&G, we design, engineer, and manufacture premium metal roofing systems that deliver exceptional wind resistance and long-term durability. To learn more about our products and their wind uplift performance ratings, contact us today.
More about B&G Building

Standing seam metal roofing is a concealed fastener system that features vertical or trapezoidal legs with flat space in between. This standing seam roof system from B&G is one of the most durable and weathertight roofing systems available in the industry. Its concealed fastener design ensures that fasteners are not exposed to the elements, which could cause them to fail over time. These panels are attached to the roof deck with clamps, eliminating holes from nails or other fasteners that could allow moisture to seep through.
Standing seam metal roofing is a premium roofing solution distinguished by its sleek, vertical seams and concealed fasteners, creating a clean, modern aesthetic with superior weather resistance. Traditionally, panels were secured using clips that engaged with the vertical legs and attached to the roofing substructure. Today, with the advancement of design and technology, both clipped and clipless panel systems are widely available offering greater flexibility in installation and performance.

B&G offers both snap-lock and mechanically field-seamed panels. Snap-lock panels are a standing seam roof system that is secured to the roof deck with clips, allowing for the thermal movement of the roofing panels. Mechanically seamed panels are similar to snap-lock panels; however, the clips that secure them in place must be crimped together either with a machine or by hand. There are four basic types of standing seam metal roof systems: double lock seam, symmetrical seam, one-piece snap-lock interlock, and two-piece snap-lock interlock.

Name:Corrugated Roofing Sheet
Standard:ASTM, JIS, GB, AISI, DIN, BS
Surface Treatment:Coated
Specification:Manufactured according to customer
Edge:Customized
Price Term:Fob CIF EXW CFR
MOQ: 3 tons
Delivery Time:About 15 Days
Thick:0.12~4 mm or customer's requirement;
Width600-2000 mm according to customer's requirement ;
Material : SGCC,DX51D~DX53D,G350-G550 .
Coating Mass:AZ10-275 (g/m2)
Paint Systems:Primers: Epoxy, PU
Colors:As Per RAL Chart/Customer requirements.
Application:Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate, Roofing Material
Payment terms: T/T, LC, Western Union
Packaging Details:Export packing; or according to customer's requirements.

Contents:Prepainted Galvanized - PPGI
Standard:ASTM, JIS, GB, AISI, DIN, BS
Surface Treatment:Coated
Specification:Manufactured according to customer
Edge:Customized
Price Term:Fob CIF EXW CFR
MOQ: 3 tons
Delivery Time:About 15 Days
Thick:0.12~4 mm or customer's requirement;
Width600-2000 mm according to customer's requirement ;
Material : SGCC,DX51D~DX53D,G350-G550 .
Coating Mass:AZ10-275 (g/m2)
Paint Systems:Primers: Epoxy, PU
Colors:As Per RAL Chart/Customer requirements.
Application:Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate, Roofing Material
Payment terms: T/T, LC, Western Union
Packaging Details:Export packing; or according to customer's requirements.

Name:PPGI Sheet
Standard:ASTM, JIS, GB, AISI, DIN, BS
Surface Treatment:Galvanized
Specification:Manufactured according to customer
Edge:Customized
Price Term:Fob CIF EXW CFR
MOQ: 3 tons
Delivery Time:About 15 Days
Thick:0.12mm-1.5mm, according to customer's requirement;
Width:750mm-1250mm, according to customer's requirement;
Material :SGCC/SGCH/CS Type A and B/DX51D/DX52D/G550/S280/S350 ETC;
Zinc coating :Z30-Z275
Application:building &Construction, Household appliances, transportation, roofing sheet
Payment terms: T/T, LC, Western Union
Packaging Details:Export packing; or according to customer's requirements.

Model NO.
Roofing Sheet
Type
Steel Plate
Standard
ASTM, AISI, GB, JIS, DIN, BS
Certification
ISO, RoHS, IBR
Surface Treatment
Coated
Technique
Cold Rolled
Application:Mold & Dies, Ship Plate, Boiler Plate, Container Plate, Flange Plate
Special Use:Cutting Tools, Measuring Tools, Cutters in Common Steel, High-strength Steel Plate, Wear Resistant Steel, Silicon Steel
Stock:Stock
Zinc Coating
30-275g
Colour
Any Ral Color or Based on Received Samples
Paint Front Thickness
12-35um
Paint Back Thickness
5-30um
Coating Material
Polyethylene, HDP, Polyvinylidene Fluoride, SMP
Transport Package
According to Customer Requirements
Specification
0.11-0.8mm
Origin:China
Coating thickness Front: 12-35 1/4m / Back: 5-30 1/4m
Surface Treatment
Hot dip galvanized, pre painted

Item

Regular

Fire -proof

Moisture -Proof

Water-Proof

Width(mm)

900/1200/1220mm

Length(mm)

2400/2440/3000/3600mm

Thickness (mm)

6.4/8/9/9.5/10/12/12.5/13/15/15.9/16mm