Find Verified Gym Ropes Cables Suppliers, Manufacturers and Wholesalers

Know Us Leveraging on our robust infrastructure and expertise of dexterous workforce, we, IndoChains, are a name to reckon with. Established in the year 1981, we have been successfully catering to the needs of bulk material handling, material conveying, storage, reclaiming & stacking, surface finishing, peening and casting.

Large conveyance: Conveyance of bulk materials in a closed case; cement, chemical, and food industries
Flow Conveyor Chain moves bulk materials in a closed case. It conveys the particles horizontally, on a slight incline, or vertically in an arrangement shaped like the letter L. This conveyor is sometimes called a Redler Conveyor.

Generally, a flow conveyor is used widely in the conveyance of bulk materials such as cement and fertilizer in chemical industries, and grain in food industries. Because it is enclosed, dust from the conveyed materials is contained, and will not pollute the surrounding area. A flow conveyor is not usually used to move sticky, dusty, or low-density products.

A flow conveyor set up to move cement has an average capacity of 300 ton/h and a speed of 35 m/min. Usually one strand of chain is used.

Specially shaped attachments with large clearances are installed on small pitch or large pitch conveyor chains. The chain operates in a casing filled with conveyed material, such as grain, flour, or ash.

This is based on a phenomenon used in a basic science experiment; when you put sand in a long cylinder, closed at one end with paper, and push the sand with all your strength, the paper cannot be broken if the cylinder is long enough. This is because the friction between the sand and the cylinder absorbs all of the pushing force. Conversely, in the flow conveyor, the attachments work as moving walls, and the sand moves along with it. To lift conveyed objects, the friction at the bottom wall of the conveyor must support the weight of the vertical portion, therefore, the conveyor must have a bottom line "L" shape.

Because there is very little relative movement among the conveyed materials in this application, breakage is rare. The case width is determined by the attachment dimensions; usually it is less than 750 mm.

Chains for flow conveyors include: RF03075 (average tensile strength, 29 kN) through RF26200 (314 kN) for grain conveyance; RF450W (108 kN) through RF36300N (868 kN) for other applications.

Bucket Elevator Chains convey bulk materials vertically. You might see this type of chain used to move cement, coal, or grain, for example. Buckets are installed at regular intervals, and the chain moves continuously, scooping and conveying the product. Because they are effective and economical, Bucket Elevator Chains are widely used.

When the chain engages the upper sprocket, the buckets are tipped, and conveyed objects are discharged. Discharging occurs either with centrifugal force or continuously, which uses the bottom side of the bucket as a guide for the next bucket.

The trend has been for bucket elevator equipment to become smaller, to economize on installation costs. To reduce the operating costs, the chain must travel faster (more than 80 m/min.). Therefore, the centrifugal discharge bucket elevator has become more common. Usually, the capacity of the conveyed material is within the range of 300 ton/h.

Suitable for handling hot material like clinker in Horizontal and Inclined profile upto 45 degree.

Pans are pressed in high capacity presses using special dies which imparts high strength and ensures very less spillage of handled material.

Independent rollers are fixed at regular intervals to the pans.

Usually, sprockets with 12 teeth are used in low-speed bucket elevators (chain speed less than 45 m/min.). High-speed bucket elevators normally require 24-tooth sprockets. It is important to choose a sprocket with suitable pitch-line clearance.

Excess conveyed material may accumulate in the bottom of the casing, which can cause accelerated wear. Worn chain and sprockets will not engage correctly; the sprockets may have to be replaced. Sometimes, welding material onto the tooth at the point of excessive wear will restore the sprocket, but it is not recommended. Additionally, this procedure is extremely difficult with the sprocket that is located at the top of the bucket elevator.

Even sprockets with hardened teeth are subject to excessive wear in bucket elevators, due to the abrasive nature of conveyed materials. For example, in cement conveyors, there is a point of sprocket hardness at which wear is virtually eliminated. However, it is impractical and expensive to make such hard teeth in standard sprockets. In the 1980s, detachable-tooth sprockets were developed, which permit the replacement of the tooth part only. The body of the sprocket remains on the shaft, which reduces repair time and costs. By using special materials in the tooth insert, high tooth hardness is achievable, and therefore, wear life is increased. Use of detachable-tooth sprockets is increasing, especially in the cement industry.

Large conveyance: Vertical conveyance of grain and other bulk materials for the cement, chemical, and food industries

Bucket Elevator Chains convey bulk materials vertically. You might see this type of chain used to move cement, coal, or grain, for example. Buckets are installed at regular intervals, and the chain moves continuously, scooping and conveying the product. Because they are effective and economical, Bucket Elevator Chains are widely used.

When the chain engages the upper sprocket, the buckets are tipped, and conveyed objects are discharged. Discharging occurs either with centrifugal force or continuously, which uses the bottom side of the bucket as a guide for the next bucket.

The trend has been for bucket elevator equipment to become smaller, to economize on installation costs. To reduce the operating costs, the chain must travel faster (more than 80 m/min.). Therefore, the centrifugal discharge bucket elevator has become more common. Usually, the capacity of the conveyed material is within the range of 300 ton/h.
In large-bucket elevators, two chains are installed, one on each side of the bucket. Small-bucket elevators use only one strand of chain. The two-strand arrangement is a preferable design, ensuring safer operation.

Copper Mill berry Scrap
4900 usd /MTN
Origin : USD
MOQ : 12000 MTN . Yearly contract
Transferable LC

Non transferable LC price will be based on the stock and location.
No samples . No photo videos without LC , we need real buyers . come with only with Buyers loi on buyers letter head . we dont want to work with time wasting elements.

Minimum : 1.000.000MT / month on yearly contract 280 usd

We are tie up with worlds biggest rail manufacturing company.

Copper Cathode 6800 uSD /MTN ,LME-15
1000 MTN PM trail * yearly contract
LC , DLC payment terms

We can supply AI ingots A7, A12,
Thailand Key Specifications/Special Features : Aluminum Ingots alloy primary gradeA7, purity 99.7% minimum.Elements value (percentages): Aluminum (Al) min. 99.70 Silica (Si) max. 0.10 Iron (Fe) max. 0.20 Copper (Cu) max. 0.010 Zinc (Zn) max. 0.030 Gallium (Ga) max. 0.030 Magnesium (Mg) max. 0.020 Others each max. 0.030 Total of all impurities max. 0.30
Price : 1800 usd /MTN CIF to any AWSP

Payment Temrs: DLC , SBLC

Chrome ore

40-42% Grade

160 USD /MTN CIF
moq : 10,000 mtn pm + yearly contracts

Copper Concentrate 1275 usd /mtn FOB
10,000 MTN PM CAPACITY

20-25%
30-36%

Price will vary as the % of CU goes higher

Iron Ore 62% Fe- 64%
Origin Kenya
FOB 170 USD /MTN
MOQ 10,000 Mtn Pm Or More

Origin : Vietnam only on yearly contract
*Origin Mexco : MOQ 1,50,000 MTN PM only for Yearly contracts

FDA K510 AND CE CERTIFICATED 7usd /box
MOQ 10000000

Please dont come with out LOI

Cotton

Rayon

Viscose

Sandals

WE have sandals made from fabric and leather

Fabric sandals wi ll cost you 12 usd each FOB MOQ 1000
Leather sandals will cost you 15 usd each FOB MOQ 1000

Rose
Jamsine
sandal
Mogra
Liiy

Cotton

Lycra

Mix with spandex

Branding and customization is possible if the order value is above 3000 pieces.

cotton
M-xxl
Private branding
customization

Crape
Georgette
cotton