Product description:
Parallel groove clamp (pg clamps) are used for connecting two bare conductor or two insulated overhead line. If aerial bundled conductor is insulated, insulation must be striped before installing and then is necessary to install pg cover, who replace insulation.
Product range:
Use for aluminum conductor toaluminumconductor connection.
Type product range dimension (mm)
(sqmm) l b r
Pg010-1a 16~120 45 45 7.5
Use for copper conductor to copper conductor connection.
Type product range dimension (mm)
(sqmm) l b r
Pg011-1 16~120 45 45 7.5
Pg011-2 50~240 50 62 10.5
Use for aluminum conductor tocopperconductor connection.
Typeproduct range (sqmm)dimension (mm)
Lbr
Pg012-016~7042426
Pg012-116~12045467.5
Pg012-250~240456310.5
Variants:
The product is manufactured and supplied in modification's as is showed upwards in product range.
Storage and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
More information please contact to us by email or visit our homepage: crop-group.Cn.
Product description:
Npgax-y(cu) n=number of bolts; pg= type; x-y=range of conductor's;
Cu=for copper conductor.
Aluminium parallel groove clamp (pg clamps) are used for connecting two bare conductor or two insulated overhead line. If aerial bundled conductor is insulated, insulation must be striped before installing and then is necessary to install pg cover, who replace insulation.
Variants:
Product is produced with 2 different screw coating and with or without cover
Storage and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
Product description:
Npgax-y(cu) n=number of bolts; pg= type; x-y=range of conductor's;
Cu=for copper conductor.
Aluminium parallel groove clamp (pg clamps) are used for connecting two bare conductor or two insulated overhead line. If aerial bundled conductor is insulated, insulation must be striped before installing and then is necessary to install pg cover, who replace insulation.
Product range:
Type product range dimension (mm)
(sqmm) l b r
Pg571-0a 16~70 42 36 5.5
Pg571-1a 16~120 45 44 7
Pg571-1b 16~120 70 44 7
Pg571-2a 50~240 50 62.5 10.5
Pg571-2b 50~240 70 62.5 10.5
Use for aluminum conductor to aluminum conductor connection.
A= 2 bolts ; b= 3 bolts .
Pg571+tinned use for conductors of al-al , cu-cu, cu-al.
Used materials:
Electrical aluminium, dacomet finised screws (h.D.G. Optionaly)
Cover: uv-resistant plastic
Variants:
The product is also manufactured and supplied in modification's as is showed upwards in product range.
Storage and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
Applied to air insulated lead earth protection and temporary prove electricity.
Product range:
Use for isolated conductor to undergrounding
Type
Pctgnd95/25 isolated25-95mm /gnd rings
Pctgnd185/95 isolated95-185mm /gnd rings
Pctgnd240/150 isolated150-240mm /gnd rings
Used materials:
Uv&fire resistant pa66, pvc, dacromet or h.D.G(optional)finished steel.
Variants:
Variant of the product is also manufactured and supplied in modification's as is showed upwards in product range.
Storange and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
More information please contact to us by email or visit our homepage: crop-group.Cn.
Product description:
Crc-x a/b
Crc:crop c connector;x:type number of c body a:main conductor in mm2, b:tap conductor in mm2
The "c-spring" and wedge connector are used to connect solid and stranded aluminum, alminum alloy and stranded alluminum composite conductors including aac, aaac, acsr, acar, aw, acsr/aw, and acss.They may also be used in non-corrosive environments to connector copper conductors.
Product range:
Body type no. C body wedge size
Crc-1 50-95 sq.Mm 16-95 sq.Mm
Crc-1 50-120 sq.Mm 16-120 sq.Mm
Crc-2 150 sq.Mm 16-150 sq.Mm
Crc-3 185 sq.Mm 16-185 sq.Mm
Crc-4 240 sq.Mm 16-240 sq.Mm
Detail size please contact us or check on our catalogue.
Used materials:
Aluminum alloy, polystyrene cover
Variants:
Variant of the product is also manufactured and supplied in modification's as is showed upwards in product range.Special range can be required.
Storange and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
More information please contact to us by email or visit our homepage: crop-group.Cn.
Product description:
Purpose of insulation piercing connectors(ipc) is to connect main and one(pc13), two(pc24) tap conducor's of section, how is written on ipc body.Type without letter b serves to connect isolated conductors, with letter b bare conductors.Ipc for one tap conductor is equipped with cable termination cap pcec16/120, for two output wires-no cap.
Ipc consists from two glass-fiber reinforced plastic parts, which are fited with two brass tinned teeth's, which are coated with uv-curing silica grease and the teeth are fitted with rubber insulation.This set is associated with the bolt, nut and pinch fixation segment.The terminals marked t are equipped with tear head. The lower part of the clamp is designed to be hold by the key 17 and the ventilation chamber, providing optimal ventilation of ipc.
Product can be also used as tap connector inside low boltage boxes.
Product range:
Pct13 150/150 re/rm, isolated 6-150mm /isolated 6-150 mm, cu/al.
Pct13c 120/10 re/rm, isolated/bare 1.5-10mm / isolated/bare 6-120 mm, cu/al.
Pct13c 70/35 re/rm, isolated 6-70mm / isolated 4-35 mm, cu/al.
Pct24 120/120 re/rm, isolated 6-120mm / isolated 6-120 mm, cu/al.
Pct24 240/150 re/rm, isolated 95-240mm / isolated 16-150 mm, cu/al
Pct13b 150/150 re/rm, bare 6-150mm / isolated 6-150 mm , cu/al.
Pct13cb 120/10 re/rm, isolated/bare 1.5-10mm / isolated/bare 6-120 mm , cu/al.
Pct13c 70/35 re/rm , bare 6-70mm / isolated 4-35 mm , cu/al.
Pct23c 185/185
Pct24b 120/120 re/rm, bare 6-120mm / isolated 6-120 mm , cu/al.
Pct24b 240/150 re/rm, bare 95-240mm / isolated 16-150 mm , cu/al.
Used materials:
Uv&fire resistant pa66, pvc, dacromet or h.D.G(optional)finished steel, tinned copper.
Variants:
The product is manufactured and supplied in modification's as is showed upwards in product range.
Storange and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
Product description:
Suspension clamps are design to self supporting lv.Abc from 1 to 4 cores, the angle can be self-asjusting.Pilot wires or street lighting conductor are led alongside the clamp.
The self opening is featured by an integrate spring facilities for easily insert the conductor into the clamp.
Ascx.Y
A=number of core; sc=suspension clamp
X=min.Section of conductor ;y=max.Section of conductor
Product range:
Type cross section
Es54 (mm2)
1sc25.95 25-95 with bracket
Type cross section
(mm2)
Mu1- 2-4x16-120 8kn, max60 degrees
Mu2- 4x16-120, 8kn, max60 -90degrees
Used materials:
The wedge are made of weather&uv resistant fiberglass reinforced plastic ensuiring.
Ferrous parts are hot dip galvanized steel.
Variants:
The product is manufactured and supplied in product range.
Storange and transport:
Product do not have any specific requirements on storage. It is fire-resistant and it is not dangerous.
We are the professional manufacture of frp cable tray, frp pipe, frp storage tank, frp cooling tower, frp grating in china.
We export our products to many countries and our products are very popular with our customers.
Features of polyamide cable ties:
Material: polyamide(nylon66) made the accord with international standard
Fire rating: ul94-v2
Temperature range: -40 degree~85 degree
Certificate: ul, ce, rohs
Color: white, black
Good insulation, durability is not easy to aging
The authentication: american ul: e306674, the european union ce, rohs
Method of use: will end with a hole through with firm can pull buckle firmly
We are polyamide cable ties, nylon cable ties, extra heavy duty cable ties, self-locking polyamide cable ties, releasable polyamide cable ties manufacturer in china.
We also supply copper cable lugs, cable terminal, polyamide cable sleeves, pipe clamps, cable clamps, flexible pipe fixed support, cable end caps, metal blind plugs, polyamide blind plugs, metal threaded plugs, polyamide threaded plugs and other wiring accessories.
You can diagnose and repair simple fiber link problems with our visual fault locator-cable continuity tester. The laser-powered cable continuity tester locates fibers, verifies continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. Long battery life for hours of use.
We present our collection of heat shrinkable straight through joints, pilc straight through joints and transition joints that are suitable for medium voltage to high voltage applications upto 36 kv. These products are designed keeping in mind the special requirements of our esteemed customers. These are supplied with all the tubing and inter connectivity components necessary to quickly and easily complete installations. These are available to our clients at reasonable prices.
To maintain the continuity of the underground cables, the need for reliable jointing systems came into existence. We are committed to supply these outdoor terminations that are manufactured to not only meet the required standards but to exceed them.
We are manufacture and supplier of heat shrinkable lt joints. Due to flexibility of heat shrinkable joints for signaling cable, they can withstand vibrations near railway tacks. This range offers impeccable quality and flawless performance. The array is used in a wide spectrum of industries, and is available with us at industry leading prices.
These heat shrinkable straight joints provide perfect joining functions for the most modern low and medium range power cables. We are able to produce cable joints in different models. Our products in this category are renowned for the stringent quality processes we employ in our state of the art manufacturing facility.
Heat shrinkable termination joints are one of the most popular products of gmg international. We are the trusted manufacturer and exporter of heat shrinkable termination joints, which are known for their high durability and reliability.
Sc/st/fc/lc/mtrj/din/mu/d4/sma/lx.5 connectors available
Ul certificated cable with corning fiber for option
More cable diameters for option: 0.9mm, 1.6mm, 1.8mm, 2.0mm, 3.0mm
Customized cable colors available
100% factory tested
Feature:
Color:white
Length:customized
Od:3.0mm
Usb 2.0 male to 8 pin lighting port
Av-ipk11 support sync and charge
All-digital, 8-signal design
Specifications:
Hi-pot: dc 300v 10ms
Insulation resistance: 10m ohm /300v min
Contact resistance: 0.01 ohm max
Shield upon 95% braid
Working temperature: -25c +85c.
Moq: 200pcs
Package: pe bag
Ctn size: 51.5x33.7x21.5cm
1000pcs/ctn
N.W:5kg
G.W:5.5kg
Lead time: 3--5 days.
2263 Cable Assemblies Suppliers
Short on time? Let Cable Assemblies sellers contact you.
