Gt-60
Power 60w
Speaker 2x10inch
Impedance 8ohm
Features
Two el34s and three 12ax7s
2-channel preamp pre- and post-gain controls on lead channel
Normal volume control on clean channel
3-band passive eq (bass, middle, treble) boost switch reverb level controleffects loop footswitch selectable channel switching and reverb external speaker capabilitychrome-plated chassis brown vinyl covering two fender oem speaker
Dimensions 64 w x 40h x 24 d cm(unpacked)
67 w x 45 h x 28 d cm(packed)
Weight 28kg
The Golden Portable PA is perfect for large meetings of up to 500 people. Control up to three different microphones (2 wire, 1 wireless) separately, as well as a master volume. The wireless mic is loud and clear to a distance of over 20m. Connect more then one Golden Portable PA together for extra large gatherings or surround sound. Available with tripod stand.
Mic power amplifier :
3 mic inputs, 2 aux inputs, 1 aux output; fice led displays
70v, 100v and 4-16 ohm balanced outputs
Automatic insertion of source and mute
Separate volume control, hight/low sound adjustment
Alarm and protection in case of short circuit
Only the equipment as a pa system
We are highly recommend you to purchase some samples you are interested to evaluate them before you placing a main order . If you let us know what samples you want to purchase , we will immediately send you a proforma invoice with our bank account via e-mail .
We promise that we will strive to build mutual benefits with you for long lasting profitable business relationship . If you have any questionable things , please feel free to contact us . We need to communicate to build mutual trusts as business goes .
Professional amplifer
Pa-50004+ stereo power 750 w x 28+ stereo power 500 w x 2bridged output 1500 wthd <0.05%input sensitivity 0.775 v, 1v, 1.4vdimensions 483x405x133+mm¼height 3 u
450 Audio Amplifier Mixer Suppliers
Short on time? Let Audio Amplifier Mixer sellers contact you.
Uhf 32 channel wireless amplifier
1. Uhf 700-960mhz professional channel
2. Lcd display af level, rf level, channel value, frequency value and battery life of transmitter and receiver.
3. Pll synthisized design, with high channel stability
4. Power off automatically under low voltage to protect inside accumulator
5. Pilotone & noise lock technology
6. Advanced smt technology to ensure the quality
7. Has got fcc approval
PLC, programmable logic controller, multifunction timer counter, panel meter, SMPS, switching power supply, HMI, programmable DC power supply, DC electronic load, multimeter, tour guide system wireless amplifier.
100% Digital processing for exceponal sound quality
Bluetooth Open-fit
APP provided:
-Volume control
-Memory switch
2 channels WDRC amplifier
12 bands frequency shaping
Low battery warning
Open-fit design,easy operating
Rocker Switch
Wideband MPO
Low current consumpon
Advantages
Digital open-fit
Bluetooth
Roland TD-30KV-S V-Pro Electronic Drum Kit with all original parts and accessories!
Package content are:
Drum Sound Modpe TD-30 x 1
V-Kick KD-140-BC x 1
V-Pad (Snare) PD-128S-BC x 1
V-Pad (Tom1, Tom2) PD-108-BC x 2
V-Pad (Tom3, Tom4) PD-128-BC x 2
V-Hi-Hat VH-13-MG x 1
V-Cymbal Crash CY-14C-MG x 2
V-Cymbal Ride CY-15R-MG x 1
Drum Stand MDS-25 x1 (included in the US)
Hardware Items Needed to Complete the set:
Hi-hat stand
Bass Drum Pedal
Snare Stnad
Drum throne
The JBL 4345 4way studio monitors are in great working condition. These are 4 way system designed for full range or biamplified operation w/ 18" woofers, 10" mids, 2" compression drivers & ultra high tweeters. These are very heavy and local pickup preferred but will ship. PLEASE LOOK AT PICS and judge for yourself.
Scheme: 4 ways, 4 loudspeaker bass-reflex scheme, and a floor type
Unit: For low-pass: 46cm cone type (2245H)
For inside low-pass: 25cm cone type (2122H)
For mid-high ranges: Horn type (2420+2307+2308)
For high regions: Ring type (2405)
Frequency characteristic: 32Hz-20kHz±3dB
Directivity (horizontal x vertical): 60 degrees x 30 degrees (-3dB, 16kHz)
Output sound pressure level: 95dB/W/m
Impedance: 8ohms
Allowable input: 120W (at the time of a network)
200W (multi-amplifier Lo)
100W (multi-amplifier Hi)
Cross over frequency: 320Hz, 1.3kHz, 10kHz (at the time of a network)
290Hz, 18dB / oct (at the time of multi-amplifier)
Th processor provides high-quality 24-bit audio performance and over 1,600 preset effects algorithms including presets for 5.1 surround sound. The H8000FW features UltraShifter, Eventides most natural-sounding, formant-corrected pitch changer which is optimized for voice and includes automatic pitch correction. FireWire ports deliver computer interactivity with graphic computer
Main Feature:
1. Fashion front panel is made of brushed aluminums alloy;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short circuit protection and switch delay protection;
4. Powerful output capacity to achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large performance, pubs, KTV rooms and large conference rooms etc.
Technical Specifications:
8O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*800W
4O stereo(per channel) (1kHz(EIA)with 0.5%THD):2*1200W
8Obridge mono (1kHz(EIA)with 0.5%THD):2400W
Voltage Gain: 5dB
Total Harmonic Distortion(THD):< 0.5%,20Hz-20kHz
Intermodulation Distortion(IMD):?0.35%
Slew Rate:>10V/us
Frequency Response (at 1 Watt): 20Hz-20kHz,+0/-1dB
Damping Factor (8 O), 10Hz-400Hz >200
Signal-to-Noise Ratio (below rated power,20Hz -20kHz, A-weighted ): >100dB
Crosstalk (below rated power) At 1 kHz At 20 kHz:-75dB -59dB
Input Sensitivity for full rated power at 8O: 0.775V or 1.4V
Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO
Input Connectors: Once balanced XLR per channel
Output Connectors(Speaker Connectors): 4-POLE Speakon per channel
Front Panel Controls: Power on/off switch, one gain control per channel
Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V
Power Indicator Signal Indicator: One red LED of work, One green LED per channel
Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel
Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Main Feature
1. Fashion front panel is made of aluminums alloy with metal wiredrawing craft surface treatment;
2. Sturdy steel case can shield the electromagnetic interference from outside;
3. Strong multi-protection mechanism including radiating protection, short, circuit protection, switch delay protection;
4. 4 channels output and 800W rated power of per channel can achieve driving bass, mellow alto and clear treble;
5. Multistage power transmission combines H technology and topology will led to clear and driving sound, and reduces electric consumption;
6. Design of optimized switching power supply makes the amplifier smaller and easy to be installed;
7. High quality connectors guarantee perfectly signal transmission by firming conjunction;
8. It's suitable for large stage performances, pubs, KTV rooms and conference halls etc.
Technical Specifications
8O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*800W
4O stereo(per channel) (1kHz(EIA)with 0.5%THD):4*1100W
Frequency Response ref 1k:
THD+N:20Hz-20kHz,+0/-1dB
< 0.5%,20Hz-20kHz
Voltage Gain: 38.3dB
Intermodulation Distortion(IMD): ?0.35%
Slew Rate: >10V/us
Damping Factor (8 O), 10Hz-400Hz >200
Signal-to-Noise Ratio (20Hz -20kHz): >100dB
Crosstalk (1 kHz, 20 kHz): -75dB -59dB
Input Sensitivity for full rated power at 8O: 0.775V or 1.4V
Input Impedance (nominal) Balanced / Unbalanced: 20kO / 10kO
Input Connectors: Once balanced XLR per channel
Output Connectors(Speaker Connectors): 4-POLE Speakon per channel
Front Panel Controls: Power on/off switch, one gain control per channel
Rear Panel Controls: Power on/off switch ,one gain control per channel Input sensitivity switch:0.775V or 1.4V
Power Indicator Signal Indicator: One red LED of work, One green LED per channel
Clip(peak) Indicator Fault Indicator: One yellow LED per channel, One red LED per channel
Protection: Protection against short circuits, no-load, on/off muting, Rf interference. Stable into reactive or mismatched loads
Ventilation: Flow-through ventilation form front to back
Cooling: speed regulated ,thermal protection
Main feature:
1. Class d digital technology with high efficiency, save energy and run in low temperature.
2. Balanced input xlr stereo (two ways) has two modes for selection, one is stereo and the other is bridging.
3. Functions of independent limiting, overload, overheating will protect the circuit.
4. Using ntc soft start up and pfc automatic voltage regulator circuit, so that it can work in ac-90v-240v.
5. Every channel has protection function for over voltage, overheating and overload.
6. Automatic limiting function can prevent the speaker from being damaged.
7. The class d amplifier performs surprisingly with the driving bass.
8. Equipped with high quality imported components.
Technical specifications:
Noise:20hz-20khz
Operation mode: knob control
Channel:2 channels
Stereo output power 8o:1000w+1000w
Stereo output power 4o:1800w+1800w
Stereo output power 2o:2000w
Bridged output power 8o:3600w
Bridged output power 4o:4000w
Frequency response:20hz-20khz±1db
Thd+n (10%-1khz): < 0.1%
Sr:>20v/µs
Noise insulation factor (1khz):>250
Dynamic range:=95db
Snr: =95db
Input sensitivity: 2vrms
Input impedance: balance 20k / unbalance10k
Power specification: ac 90-240v 50-60hz (±10%)
Packaging info.:
Net weight: 20kg
Gross weight: 23.65kg
Quantity/ carton: 5pcs
Packaging details:carton with plastic bag inside
Packaging size: 560(l)×280(w)×410(h)mm
450 Audio Amplifier Mixer Suppliers
Short on time? Let Audio Amplifier Mixer sellers contact you.
