MS2000 is an adhesive and sealant based on MS-polymers to provide a two –part, fast curing product. It has an outstanding bonding strength and prime less adhesion on various types of substrates.
ADVANTAGES:
Eco-friendly, Green, Healthy
High efficiency, suitable for large-scale construction
Less than 5% of the waste, saving costs
Excellent weather resistance
Outstanding Surface compatibility with paint systems
No pollution to the substrate
Excellent adhesion
No pollution to the substrate
Low modulus, high elongation, suitable for large displacement seams
APPLICATION:
Joint sealing for PCA board
Joint sealing for metal wall hanging
Joint sealing for concrete products
Sealing Around the window frames.
NOTICE:
Not applied to GLASS
After the two-component mixing the gel time of 3 hours, the need for construction at this time
Must comply with the primer, otherwise no adhesion
TEST RESULT:
Item Results
GB/T22083-2008 F-25LM
Elastic recovery% 90
Tensile Modulus 23 0.2
- 20 0.3
Tensile properties NO DEMAGE
Adhesion/cohesion properties at variable temperatures NO DEMAGE
Adhesion/cohesion properties at constant temperature NO DEMAGE
Extension after immersion in water NO DEMAGE
Volume Loss(%) 2
Liquidity/MM 0
SPECIFICATION:
Properties Parameter
Appearance White paste, all colors
Ratio=main agent: harder: color paste 100:10:5
Shelf life(under 25) 6 months
Density(g/cm3) 1.1
Operation time 5 5
23 2/4/6
35 2( summer
Package 4L
1.Excellent dielectric property
2.Excellent water and oxidative resistant performance
3.Operating temperature range (-50C to 27;C)
4.Adhere well to metal, ceramic, rubber and other isolation materials
5.Excellent corona resistance
6.Non-poisonous and low volatile
PROPERTY STANDARD VALUE
Color Visual inspection Transparent/Light grey
Density 25C, g/cm3 1.0
Penetration (Static) mm/10 250
Penetration (Dynamic) mm/10 350 Max
Oil Bleed 24hours, 27;C 12% Max
Volatility 24hours, 27;C 2% Max
Volume resistance 27;C, ohm-cm61;¨¢1012
Dielectric constant MHz 2.9
Power factor 100Hz -10MHz 0.0025
dielectric strength
;Key Features
.Two-part : mixture addition type silicone adhesive
2.Low hardening shrinkage
3.Excellent electrical insulation in high temperature and stability
4.Good waterproof and moisture resistance
5.Excellent flame resistance, UL No: E34099
;Typical Applications
Used for encapsulation of various modules, automotive module, LED Power driver modules, Solar panel junction box, EV charging column module, Lithium battery pack, Capacitor banks, Magnetic induction coils, Power inverters, etc.
;Technical Data Table
PROPERTY STANDARD/UNITS VALUE of SI2230
---- ---- PART A PART B
Color Visual inspection white / black viscous liquid white viscous liquid
Viscosity 27;C, cps 6;¨¤500 6;¨¤500
Density 27;C, g/cm3#6;¨¤0.05#6;¨¤0.05
Mixture ratio Mass ratio A:B=00:00
Viscosity of mixture 27;C, cps 6;¨¤500
Operation time 27;C, min 60¨¤0
Cure condition RTV/HEAT 27;C/ 4 hour;#7;C/ 30min
Cured appearance ---- White/ Gray-black elastomer
Hardness Shore A 56;¨¤5
Thermal conductivity W/mK 0.80
Linear expansion coefficient K-, ppm 300
Dielectric strength kV/mm, 27;C Y20
Volume resistance DC500V, ohm-cm .¨¢05
Loss factor MHz 0.009
Dielectric constant MHz 3.00
Application temperature C -60~200
Flame resistance UL-94 V-0
Part A--0 KG/Bucket, Part B--0 KG/ Bucket.
898 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
Adhesive glue is made of MDI , HDI, plasticizer, polyther, antistalin, oxygen absorbent etc
one component environmental protection PU adhesive for paving applies to air permeability and compound running tracks and courts
Environmental Protection PU Adhesive for Rubber Tiles
Packaging: 200kg/drum galvanization iron drums
Delivery Detail: 7days
Primer for asphalt and concrete base
MDI based
No bad smell
One component
PU adhesive is used for rubber tiles, there's no stimulating odor during process
1.MDI/HDI one component polyurethane binder.
2.100% eco-friendly. no harm,no poison
PU Adhesive is used to pave rubber flooring and make rubber tiles, such as athletic field, sports courts, children playground, walking way, park, etc. Suggested ratio of adhesive and SBR is 1:7, adhesive and EPDM is 1:5. With 20-30% air humidity, it needs 2 hours for curing; while it reaches 75%, construction is not recommended. Normal packing is 200kg/barrel, customized packing is also allowed.
It applies to air permeability and compound running tracks and courts.
It applies to make rubber tiles, which are used for paving kindergartens, excise yards and gyms.
Silicone grease is semi-permeable white grease, the properties are non-toxic, superior waterproof and adhesiveness, that can be compatible with plastic and keep the stability of lubrication.Widely used in appliances, toy, office equipment such as photocopier, paper shredder/printer and plastic gear of massager.
ZS-GF-5299E is a low viscosity two-component addition cure silicone sealant, that can be cured at room temperature or heat cure, the higher the temperature, the faster the curing. This product does not produce any byproducts in the curing reaction, which can be applied for PC (poly-carbonate), PP, ABS, PVC and other surface of metal. Complied with the ROHS, REACH of EU directive.
Designed to ensure application efficiency and maximum production speeds and will not cause attack on polystyrene foam or other sensitive substrates when used strictly according to directions. Adhesive f31 is normally used as contact adhesives, but is also suitable for use in many pressure-sensitive applications.
Is specially formulated for halogenating rubber, synthetic materials and tpu soles. Used in footwear manufacturing. It can also be used as an alternative to mechanical roughing of rubber soles. Primers are normally available in a powder form along with specific thinner. Both the products should be mixed at the manufacturers' factory as per the specified ratio (e.G. 2.5 gms. Powder in 100 ml solvents)
Adhesive for bonding skin to cork, cloth, leather and coria for sandals and slippers; cold assembling of uppers on cardboard or salpa insoles; finishing of sundry materials, wooden heels and wedges; various kinds of bonding for leather goods. Suitable also for bonding leather-skin shoes in ago working.
Extra strong and heavy polyurethane adhesive as a high quality of raw material for bonding all pvc infection moulded sole units, it is one or two components holding a high viscosity and heat resistance for especially warm countries
Surface treatment agent for cleaning and wiping eva, pvc, pu soles and thermo surfaces before bonding with appropriate adhesive. It should be used at least 10-30 minutes prior to adhesive application.
It apply to kitchen & bathroom countertops, hotel worktops . It can fabricate a seamless benchtop, sink and splashback package, offering a hygienic solution that is well-suited to kitchens, food preparation areas, healthcare and bathroom environments as an alternative to stone, granite and marble benchtops. Solid surfaces adhesive are also ideal for bathroom vanity tops with integrated basins.
The introduction of adhesive
Chma600 is dual-component, 10:1 ratio, 100% reactive adhesive, designed for seaming and jointing acrylic solid surfaces and other surfacing materials containing densified polyester sheet, thermoplastic plastic, grp, aluminium alloy.
898 Adhesive Sealants Lubricants Suppliers
Short on time? Let Adhesive Sealants Lubricants sellers contact you.
