Find Verified Industrial Oil Suppliers, Manufacturers and Wholesalers

Pox Cure - LH 1443 is a modified cycloaliphatic polyamine free solvent hardener.
Pox Cure - LH 1443 is preferably used in combination with suitable epoxy resin formulations for
, Self-leveling good quality flooring
, Chemical resistance mortars and linings
, High solids coatings
, Anti-corrosion coatings
, Decorative tile grouts
, High solids maintenance primers
, Other construction applications
Mix Of :60 gm with 100 gm epoxy resin
Pot life :app. 25 min from 23 to 40�?�°C for 100 ml
Shore D :> 82
Standard Bisphenol-A based (DGEBA, EEW=190) epoxy resin*
Advantages:
, Nonylphenol free
, Low viscosity
, Light-colored films with good color stability
, Can be used in contact with drinking water and food production areas
, Good chemical and mechanical properties
, Good resistance to amine blush with high gloss
Appearance :Clear liquid
Viscosity at 23 °C :app. 400 mPa.s

Pox Fix Adhesive PF is a rapid set epoxy adhesive which sets for small or emergency repairs
Comp A Comp B
Consistency Thixotropic paste Thixotropic paste
Color White White or Black
Flash point 100C 100C
Solids content 100 100
Mixing ratio 1 Part A to 1 Part B by volume
Mixing Mix until uniform in colour
Working life at 23C 23 minutes
Minimum application Temp 10C
Minimum cure time 12 hour at 23C
Full cure time 23 hours at 23C
Shore D 80
Easy mix 11 mix ratio and workable
Non sag on vertical surfaces
Smooth creamy texture
Sets in 23 minutes at 23C
High tensile and compressive strengths
Very good chemical resistance
Will not discolour white or light coloured marble if mixed Fix Pox Adhesive PF properly
Pox Fix Adhesive PF is used in on the spot emergency repairs to Concrete structures Machinery Potable water tanks Stone Concrete floors Concrete pipes Ceramic Concrete stairs Fiberglass Grouting bolts Wood Brick etc

Description
Pox Fix Adhesive PF is a rapid set epoxy adhesive which sets for small or emergency repairs
Specification
Comp A Comp B
Consistency Thixotropic paste Thixotropic paste
Color White White or Black
Flash point 100C 100C
Solids content 100 100
Typical mix properties
Mixing ratio Mixing Working life at 23C Minimum application Temp 10C
Minimum cure time Full cure time Shore D 80
1 Part A to 1 Part B by volume
Mix until uniform in colour
23 minutes
12 hour at 23C
23 hours at 23C
Advantages
Easy mix 11 mix ratio and workable
Non sag on vertical surfaces
Smooth creamy texture
Sets in 23 minutes at 23C
High tensile and compressive strengths
Very good chemical resistance
Will not discolour white or light coloured marble if mixed Fix Pox Adhesive PF properly
Applications
Pox Fix Adhesive PF is used in on the spot emergency repairs to
Concrete structures Machinery Potable water tanks Stone Concrete floors
Concrete pipes Ceramic Concrete stairs Fiberglass Grouting bolts Wood Brick etc

Magic Pox is a crystal clear epoxy coating and casting resin
Magic Pox is a crystal clear casting and coating epoxy system that cures to a rigid, Moisture resistant, shiny high
gloss of crafts and decorative applications
Magic Pox finishes used for:
Coating Casting
Clear coating and sealing artwork Casting jewelry including earrings
Photography Pendants
Plaques and frames Necklace ring & Rings
Paper collages Figurines
Tabletops Coasters
Ideal for Both Casting and Coating
Perfect for starter beginner and professional artist
Cures crystal clear
Moisture resistant
Environment friendly (odor free and no solvent)
Rigid and high gloss finish
Self-leveling
Exceptional clarity
Natural air bubble release without the need for degassing
Hard wearing and highly polishable!
Excellent impact strength

Mix ratio by weight : 100 A : 25 B
Color Water clear
Solids Content 100 %
Specific gravity 1.1 �± 0.02
Working time Approx. 30 min. (at 23 C)
Substrate temp. Min 10 C , max 30C
Initial Curing time Approx. 24 h (at 23 C)
Fully cured 7 days (at 23 C)
Hardness, Shore D > 82
How to use
Surface preparation:
The surface must be clean, dry, and free of dust. The all damaged areas, cracks and surface irregularities must be
repaired and smoothened.
Mixing:
It is important to remember that this cast has a limited work time (Approx. 30 min. at 23 C).Therefore it is wise to
check and make sure everything is in order before starting the mixing sequence.
Stir the contents of part A with an electrical stirrer .Add part B to part A completely for 2 - 3 minutes with a low speed
stirrer until a homogenous mix is achieved. Be careful not to introduce any air bubbles while mixing until a uniform
consistency is obtained. Afterwards the mixture is left to rest for approx. 5 minutes, then pouring Magic Pox in
prepared surface.
Processing conditions:
Temperature-The optimal processing temperature is about 20 C. Raising the temperature by 10 C halves the
pot life and doubles the reactivity
Air humidity The relative air humidity during processing should not exceed 65 %.
Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal
reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 C) can counteract
too great an exothermal reaction.
Cleaning
Cleaning all tools and equipments immediately after use with acetone or cellulose thinners.
Health and Safety
Use gloves and breathing mask when applying.
Apply forced ventilation in confined spaces.
Skin splashes to be removed with hand cleanser, soap and water.
Eye splashes to be removed with plenty of water.
If ingested seek medical advice