Setapol 260 1C is an elastic coated polyurethane membrane of one component for long-lasting waterproofing.It has hydrophobic resistance to sun and frost while it is breathable with anti-corrosion properties.Setapol 260 1C is ideal for the sealing of roofs , balconies ,rooms , gardens , pots and for the protection of thermal insulation foam polyurethane.
It also has coverage of 1.5 - 2.0 kg / m2 in two or three layers.
Setapol 400ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.There is no yellowing on the surface.Setapol 400ML 1C is ideal as a final sealant on moderate pedestrian traffic surfaces.It has coverage of 0.15 - 0,25 kg / m2 in two or three layers.
Setapol 400ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.There is no yellowing on the surface.Setapol 400ML 1C is ideal as a final sealant on moderate pedestrian traffic surfaces.It has coverage of 0.15 - 0,25 kg / m2 in two or three layers.
Setapol 450ML 1C is an elastic paint of aliphatic polyurethane base of a component with good mechanical strength.It has a particularly high resistance to sun and frost.There is also no yellowing on the surface.Setapol 450ML 1C is ideal as a finishing coat resistant to light alloys.
Setapol 260T 1C is one-component thixotropic polyurethane membrane for long-term waterproofing.It provides hydrophobes with frost and sun resistance which are breathable.Setapol 260T 1C is ideal for waterproofing vertical surfaces in gardens of underground wall.It has coverage of 1.5 - 2,0 kg / m2 in two or three layers.
85 Polyurethane Waterproof Coating Suppliers
Short on time? Let Polyurethane Waterproof Coating sellers contact you.
Desoprime is an epoxy polyamide primer of two components with zinc phosphate as a preventive dye of the corrosion. When dried completely it creates a rust - resistant ,high strength coating.It is used as an epoxy primer for general use according to the painting instructions.
Desmofen is an acrylic polyurethane coating with two-component poly-gloss aliphatic isocyanate hardening .It has remarkable gloss and colour-shade.It is used as a polished finish for alluminium ,steel ,reinforced polyester and wood in a highly corrosive atmospheric environment.
Desmozinc 500 is an epoxy polyamide primer of two components rich in zinc.When dried completely it creates a high strength coating very weather-resistant.It provides cathodic protection against local mechanical damage.It is used as an epoxy primer according to the painting instructions.
Fujimar 600 is an anti -colour to protect shells from shellfishes and grass adhesion.It is ideal for plastic , wooden and iron boats and for speeds of up to 50 miles.It does not change its colour when it is out of the water.It contains a new microbict by prolonging the protection of the boat in the water.
Fujimar 500 is an anti-colour to protect shells from shellfishes and grass adhesion.It is an ideal coating for plastic , wooden and iron boats and for speeds of up to 35 miles.Fujimar 500 presents a change in its colour when it is outide of the water due to its composition.
Desmalkid Prime is a zinc phosphorus primer with an alkyd base which dries relatively quickly.It is usually used as a general purpose primer for Desmalkid Prime Systems for the protection of steel structures in mild to moderate corrosive atmospheres.
Desnamel 200 is a fast-drying zinc phosphorus primer with an alkyd base.It is an ideal primer to prevent rust in steel.It is also indicated for mechanical parts and where fast drying is required.
Desmepox 1000 is a two-component epoxy amine coating which when dried produces a coating whith excellent resistance to different chemical substances.It is used as an internal tank coating according to the painting instructions.
Desmopol Topcoat is a semi-acrylic polyurethane coating of two-components aliphatic isocyanate with good gloss .It is used as a final coating for the protection of structural steel in extremely corrosive environment, when light steadiness and preservation of the gloss is required.The minimum heat for drying is -10
Desnamel Fast Dry is a fast -drying alkydic final coating with good gloss and preservation of hue.It is used as a primer as long as a final coating for steel in a slightly corrosive environment.
Lighter than typical north-European clothing
More autumn than winter
Includes also working dressing and special clothing
Packed into 170-200 kg capsacks
FX 550 is a two-component epoxy coating for industrial floors.It offers increased resistance to abrasion,chemical effects and weather conditions.
Shades: RAL 9016, RAL 7040, RAL 1015 & other shades on request
Spreading rate : 200-300 kg /m2
We produce FUJI TROLL 235 Antifouling paint for fishing / cage nets - environmentally friendly. It contain no organic solvents and heavy metals.
We have been producing FUJI TROLL 235 for more than 15 years and we have outstanding durability in the marine environment with a lifetime of 18 to 19 months in the sea.
We have carried out in University Technological Educational Institute of Western Greece, Department of Fisheries and Aquaculture Technology all the toxicological tests required for FUJI TROLL 235 as well as resistance in salt and seawater.
Our company produces FUJI TROLL 235 Antifouling under the most stringent environmental conditions according to European Union regulations.
Helmet Premium is a high quality emulsion paint for interior and exterior use.It is characterised by excellent surface coverage.It also has a particularly high spreading rate and exceptional whiteness.
Spreading rate: 10-12 m2/kg
Helmet Excellence is a high quality emulsion paint for interior and exterior use.It is characterised by excellent surface coverge,high rendering and exceptional whiteness.
Spreading rate :10-12 m2/kg
85 Polyurethane Waterproof Coating Suppliers
Short on time? Let Polyurethane Waterproof Coating sellers contact you.
