Dried red and green paprika (bell paper) - Size 3*3 mm/6*6 mm/10*10 mm
Packaging - 15-20 kg (3 layer craft bag and plastic bags)
Fraction - Cube, Plate, Flake
Carrot - Size 6*6 mm/ 10*10 mm
Packaging - 15-20 kg (3 layer craft bag and plastic bags)
Fraction - Cube
Color: Orange
Beet - Size 6*6 mm/10*10 mm
Packaging - 15-20 kg (3 layer craft bag and plastic bags)
Fraction - Cube
Color - Dark red, red with a cherry tint
Leek - Size 6*6 mm/ 10*10 mm
Packaging - 50 g (3 layer craft bag and plastic bags)
Fraction - Cube
Color - Light yellow
Dill - Size 6*6 mm/10*10 mm
Packaging- 15kg (3 layer craft bag and plastic bags)
Fraction - Needles, Stems
Color - green
Parsley - Size 6*6 mm/ 10*10 mm
Packaging - 12 kg (3 layer craft bag and plastic bags)
Fraction - Needles, Stems
Color - Green
460 Plastic Drum Barrel Suppliers
Short on time? Let Plastic Drum Barrel sellers contact you.
a. Name of product: Different type of polystyrene
b. Price of product: Will be informed
c. Product origin: Different source
d. Key Specifications/Special Features
e. Harmonization System (HS) Code : 39031910
f. Minimum Order Size : 22MT
g. Packaging details: 25Kg on Pallet/ 1150Kg in big bag
Optical Scale Sensor
The electronic volume scale on conveyor belts measures the volume of material on the band through an electro-optical sensor ( See Figure below ) and transfers the data to a a Programed mobile phone and it to the inclueded printer to print datas at sinde and or to computer for statistical purposes,
It works without contact with the material and therefore is not affected by vibration or dust, it carries out measurements on belts with different degrees of inclination, even when the inclination is varied during the work. Automatic measurement and data storage, data transfer via Bluetooth. failure factor 0.7%.
The measurement is based on the volume and the density factor of the aggregate will convert in weight
Diatomaceous Earth is a naturally occurring, soft, siliceous sedimentary rock that can be crumbled into a fine white to off-white powder. It has a particle size ranging from more than 3 m to less than 1 mm, but typically 10 to 200 �¼m.
Diatomaceous earth consists of the fossilized remains of diatoms, a type of hard-shelled microalgae. It is used as a filtration aid, a mild abrasive in products including metal polishes and toothpaste, a mechanical insecticide, an absorbent for liquids, a matting agent for coatings, a reinforcing filler in plastics and rubber, and an anti-block in plastic films.
Palm oil is a vegetable derived from the fruit of the palm, it has two types that are used in food, and a third types has a cosmetic therapeutic properties.
Clarification of a possibly already occurred immune reaction of the body against SARS-CoV-2 by determination of the specific IgM and/or IgG immunoglobulins (Antigens: S1, S2 and N Proteins).
Price-Details:
25% discount for government, clinics and medical facilities. Companies will only receive the discount if they can prove that they use the product for their own purposes and not for commercial purposes. Ask for special deal for 1,000,000 units and more.
Performance:
The rapid test has a very high accuracy because - unlike most rapid blood tests and laboratory tests - it uses 3 proteins (S1, S2 and N) to detect the antibodies (so-called trinity method). The significance of the rapid test increases during the course of the infection with the formation of antibodies in the blood (between day 4-11 in about
70% of patients).
The overall sensitivity of the test (IgM/IgG) is 98.6% (> 1,100 clinical trials).
The specificity of the test (reaction only to Covid19) is 99.5% (> 1,500 clinical trials).
Please compare this with other tests!
Advantages
Quick result: The rapid test shows a significant result within 20 minutes.
Test procedure: We provide a simple and fast test procedure with two drops of blood from the fingertip, from venous blood or from unfrozen serum.
Certified Quality: The test is â??Made in Germany with CE conformity declaration and fulfils the FDA & WHO-requirements.
What is included per unit:
1x Cassette (Polystyrene)
1x Support Pad (PVC 3.0 x 60 mm)
1x Cellulose Nitrate Membrane (Cellulose nitrate membrane coated with mouse, anti-human IgM and IgG antibodies)
1x Specimen Pad (Glass fiber / GF)
1x Liquid Absorption Pad (Cellulose acetate membrane)
1x Chemical Coupling Pad (Sealed glass fiber, coated with SARS-CoV-2 antigens and mouse IgG controls)
2g Desiccant (Molecular sieve desiccant)
1x, Aluminum Foil Package (12 x6.5 cm, three-layers of aluminum foil paper)
1x Tag (80 x 50 mm, single-sided plastic tag)
1x Sealable Bag (A sealable bag for disposal of the used cassette)
1x Lancet (Lancets for fingerstick whole blood only)
1x Plastic pipette (A transfer plastic pipette with the line mark of 50 )
1x Squeezable plastic liquid dropper ampoule (Plastic ampoule containing dilution buffer 1)
1x Instructions for Use
Our Esteemed Tableware DIANA TABLE ware in 30 pcs in a Paper Box wrapped with thin transparent thin plastic film. Set box includes in pure 18-10 Stainless steel
6 x Menu Spoons
6x Menu Forks
6x Menu Tea Spoons
6x Menu Cake forks
6x Menu knives
Rapeseed Oil is one of the best oils if to consider mono unsaturated fats. It contains
vitamin E, K, omega-3 fatty acid and has ability to lower bad cholesterol
(LDL). It decreases the risk of hear disease, strengthen immune system.
Canola Oil is perfect for all types of foods for its taste and smell and can be
used for fried dishes.
Packaged in plastic bottles of 1L, 2L, 3L and 5L and in cans of 5L, 10L and 18L.
Price and delivery condition are individual (depend on quantity, quality and destination).
With a goal to provide huge satisfaction to customers, we are engaged in offering high grade HDPE Blue Drum Grinding. Prepared by our adroit professionals using best in class plastic materials, the offered granules is highly praised among customers due to their excellent flame resistant. It is suitable to manufacture cans, bottles, buckets, automotive parts, bags and other items. The provided HDPE Blue Drum Grinding is known for their recyclable nature and superior melting point.
We have established our worth in the market by manufacturing premium quality HDPE Blue Drum Grinding. These are manufactured in complete adherence to industrial quality standards keeping in mind the requirement of the client and the application. These are available to clients in various sizes. These are supplied to clients at affordable prices. Priced economically, these granules are supplied to clients within the stipulated frame of time at leading market costs.
We procure waste drums from reliable sources and after proper checking and waste removal, we process those drums to fine flakes. Using modern machinery and tools, we are able to make excellent quality blue flakes after regrind process. These are widely used in plastic industries for making a variety of plastic products. Also, due to its extensive usage and demand in the market, we always have stock of this scrap. HDPE Blue Drum Grindings can be availed from us in bulk at discounted rates.
ROLAND
Electric percussion
Model number: SPD-30
Number of internal tones Number of tones: Instrument = 670
Number of hitting surfaces 8
Features / Remarks A percussion pad that realizes a realistic sound and natural feel that stimulates the creativity of players by expanding the range of drum sounds.
Payment
Bottles with spray. Transparent. 75ml. Durable material, bottle does not break. Made in Spain. All in manufacturer's packaging. Approximately 44,736 pcs. left. 24 pcs. per box.
-Disposable Polyethylene Work Gloves for
Cooking and Food Handling
Cleaning
Hairdressers
Bakery and confectionery
Laboratories, health centers, and hospitals
Gas stations
Application
Neue herbold - single-shaft-shredders hzr series are mainly used for pre-cutting of bales, scrap tires, energetic utilization of waste as well as post consumer waste.
Technique
Neue herbold - single-shaft-shredders are equiped with a slow operation rotor. A hydraulically controlled ram feeder
- exchangeable cutting heads (bolted/plug-in connection)
-Disposable Polyethylene Work Gloves for
Cooking and Food Handling
Cleaning
Hairdressers
Bakery and confectionery
Laboratories, health centers, and hospitals
Gas stations
Commodity
Sparkling Juices
packaging
- 360ml PET bottle, 24 bottles/carton, 1700 cartons/20ft containers
shelf life
18 months
MOQ
mixed flavors on one container
delivery time
15- 20 days after deposit
sample
free
certification
ISO, halal, Haccp, FDA
private label
accepted at low fee
Specification
White Refined Cane sugar -
Polarization : 99.80% Min
Ash content : 0.04% Max
Suphateash Content : 00.04% Maximum
Moisture : 0.04% Max
Solubility : 100% dry Free Flowing
Radiation : Normal without Presence of Cesium or Iodine Certified
Granulation : Fine
Smell : Free of any Odor
Reducing Sugar : 0.05% Maximum by Weight
Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect
ICUMSA: >OR=100 ICUMSA and<150 ICUMSA as determined in sugar analysis
Crop : Current
SO2: 70MG/K
Radiation : Normal within internationally accepted limit
Moisture: 0.04% max by weight
Solubility : 100% dry free fine flowing
Polarization : 99.80% min
Granulation : fine standard
Ash by electrical : 0.04% max (on dry weight basis)
Smell : free or any smell
Reducing sugar: 0.05% max by weight
HPN Staph Aureus: nil
Max.AS : 1 PPM
Max.PS : 2 PPM
Substance : solid crystal
Specification
White Refined Cane sugar -
Polarization : 99.80% Min
Ash content : 0.04% Max
Suphateash Content : 00.04% Maximum
Moisture : 0.04% Max
Solubility : 100% dry Free Flowing
Radiation : Normal without Presence of Cesium or Iodine Certified
Granulation : Fine
Smell : Free of any Odor
Reducing Sugar : 0.05% Maximum by Weight
Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect
ICUMSA: >OR=100 ICUMSA and<150 ICUMSA as determined in sugar analysis
Crop : Current
SO2: 70MG/K
Radiation : Normal within internationally accepted limit
Moisture: 0.04% max by weight
Solubility : 100% dry free fine flowing
Polarization : 99.80% min
Granulation : fine standard
Ash by electrical : 0.04% max (on dry weight basis)
Smell : free or any smell
Reducing sugar: 0.05% max by weight
HPN Staph Aureus: nil
Max.AS : 1 PPM
Max.PS : 2 PPM
Substance : solid crystal
Specification
White Refined Cane sugar -
Polarization : 99.80% Min
Ash content : 0.04% Max
Suphateash Content : 00.04% Maximum
Moisture : 0.04% Max
Solubility : 100% dry Free Flowing
Radiation : Normal without Presence of Cesium or Iodine Certified
Granulation : Fine
Smell : Free of any Odor
Reducing Sugar : 0.05% Maximum by Weight
Fumigation : Well Cleaned from Molds, Unnatural Odors, Chemical and Insect
ICUMSA: >OR=100 ICUMSA and<150 ICUMSA as determined in sugar analysis
Crop : Current
SO2: 70MG/K
Radiation : Normal within internationally accepted limit
Moisture: 0.04% max by weight
Solubility : 100% dry free fine flowing
Polarization : 99.80% min
Granulation : fine standard
Ash by electrical : 0.04% max (on dry weight basis)
Smell : free or any smell
Reducing sugar: 0.05% max by weight
HPN Staph Aureus: nil
Max.AS : 1 PPM
Max.PS : 2 PPM
Substance : solid crystal
About Meltblown Nonwove
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
About Meltblown Nonwoven
â?¢ Melt blown is a one step process to make fabrics from polymer.
â?¢ The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
â?¢ The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
â?¢ The main purpose of melt blown fabric is to provide barrier property for the liquid.
â?¢ Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
â?¢ Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
â?¢ Adjustable Pores And Capillary Structure
â?¢ Excellent barrier properties
â?¢ Filament size 1 -3 �µm
â?¢ High Elasticity
â?¢ High Filtration capability
â?¢ Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
â?¢ Large Area-to-weight ratio
â?¢ Self-bonding
â?¢ The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
â?¢ Very good thermal insulation for apparel application
â?¢ Weak tensile properties
â?¢ Wicking Properties
Application of spun-bond nonwoven fabrics:
â?¢ Sanitary and Hygiene:
â?¢ Sanitary napkins,
â?¢ Baby diapers and
â?¢ Incontinence diapers
â?¢ Medical and Surgical:
â?¢ Gowns,
â?¢ Face masks,
â?¢ Caps,
â?¢ Drapes, etc
â?¢ Other Miscellaneous Applications:
â?¢ Filtration Material,
â?¢ Agriculture,
â?¢ Oilsorbents
â?¢ Hot-melt adhesives
â?¢ Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
Melt blown is a one step process to make fabrics from polymer.
The thermoplastics chips are fed through main dosing units & these chips are melted by means of the extruder. This extruder then extrudes the melt, which is then filtered & metered at a constant rate. This filament comes out from a single raw of spinneret orifice. It has a self bonding property but for coagulation & for better random laying hot air flow is provided.
The web generated is immediately passes among the Spunbond webs followed by pre-bonding rolls & finally through calendar for thermal bonding.
The main purpose of melt blown fabric is to provide barrier property for the liquid.
Sometimes the treatment like antistatic or hydrophilic are given to the fabrics & after drying the fabrics are wound in the winder as a roll form.
Unique characteristics such as water repellence or permeability or UV stability can be obtained by incorporating additives to the raw materials or applying different agents to the fabric.
Characteristics of Meltblown fabrics are:
The main desired characteristics expected for melt blown nonwoven fabrics are:
Adjustable Pores And Capillary Structure
Excellent barrier properties
Filament size 1 -3 �?�µm
High Elasticity
High Filtration capability
Isotropic formation- this means that the fibers are randomly distributed in the machine direction (MD) and cross-machine direction (CD).
Large Area-to-weight ratio
Self-bonding
The weight of the melt-blown fabrics in gram per square meter (GSM) should range from 4 g/m2 to over 1000 g/m2.
Very good thermal insulation for apparel application
Weak tensile properties
Wicking Properties
Application of spun-bond nonwoven fabrics:
Sanitary and Hygiene:
Sanitary napkins,
Baby diapers and
Incontinence diapers
Medical and Surgical:
Gowns,
Face masks,
Caps,
Drapes, etc
Other Miscellaneous Applications:
Filtration Material,
Agriculture,
Oilsorbents
Hot-melt adhesives
Headliners, etc
460 Plastic Drum Barrel Suppliers
Short on time? Let Plastic Drum Barrel sellers contact you.
