Model Suntrio Plus 25K
Input Parameters Input Parameters
Maximum DC power w 30300
Maximum DC input voltage v 1000
Mppt voltage range v 180900
Rated input voltage v 600
Starting voltage v 200
Minimum input voltage v 180
Maximum input current pv1 pv2 pv3 a 222222
MPPTNumber of tracks 3
Number of component strings MPPT per lane 02022002
Dc switch Built in
Output Parameters Output Parameters
Rated output power w 25000
Maximum output power va 27500
Rated AC voltage range 3LNPE220380V180V280V312V485V
Rated grid frequency 50Hz45Hz55Hz
Power factorcos 08 lead 08 lag
Number of output phases 3LNPE
Efficiency Efficiency
Maximum efficiency 9860
European efficiency600Vdc 9840
MPPT efficiency 995
Protections Protections
Overvoltage protection Built in
Insulation impedance monitoring of DC terminal Built in
Dc component detection Built in
Ground fault current monitoring Built in
Grid monitoring Built in
Ac output short circuit protection Built in
Low voltage crossing Built in
Overheat protection Built in
Ac surge protection Class iii protection class ii protection optional
Anti component attenuation module Optional
Dc surge protection Level ii protection optional
Dc fuse Optional
Cluster current detection Built in
Islanding protection monitoring AFD
Interface Interface
DC Jack MC4H4
AC Terminal Terminal block
LCDLED display 35 inch LCD Backlight
Display language english
communication interface 2RS4851RS232
communication method WiFiGPRSEthernet optional
General Parameters General Parameters
Isolation type Non isolated
Night wear w
Model Suntrio Plus 60K
Input Parameters Input Parameters
Maximum DC power [ w ] 72000
Maximum DC input voltage ( v ) 1000
Mppt voltage range ( v ) 280-900
Rated input voltage ( v ) 600
Starting voltage ( v ) 300
Minimum input voltage ( v ) 250
Maximum input current pv1 / pv2 / pv3 ( a ) 40/40/40
MPPTNumber of tracks 3
Number of component strings ( MPPT per lane ) 04-04-2004
Dc switch Built - in
Output Parameters Output Parameters
Rated output power ( w ) 60000
Maximum output power ( va ) 60000
Rated AC voltage / range 3L/N/PE,220/380V;180V~280V/312V-485V
Rated grid frequency 50Hz/45Hz-55Hz
Power factor(cos ) 0.8 lead ~ 0.8 lag
Number of output phases 3L+N+PE
Efficiency Efficiency
Maximum efficiency 98.90%
European efficiency[@600Vdc] 98.60%
MPPT efficiency>99.5%
Protections Protections
Overvoltage protection Built - in
Insulation impedance monitoring of DC terminalï¼? Built - in
Dc component detectio Built - in
Ground fault current monitoringï¼? Built - in
Grid monitoringï¼? Built - in
Ac output short circuit protectionï¼? Built - in
Low voltage crossingï¼? Built - in
Overheat protectionï¼? Built - in
Ac surge protectionï¼? Class iii protection, class ii protection ( optional )
Anti - component attenuation moduleï¼? Optional
Dc surge protectionï¼? Level ii protection ( optional )
Dc fuseï¼? Optional
Cluster current detectionï¼? Built - in
Islanding protection monitoringï¼? AFD
Interface Interface
DC Jackï¼? MC4/H4
AC Terminalï¼? Terminal block
LCD/LED displayï¼? 3.5 inch LCD Backlight
Display languageï¼? english
communication interfaceï¼? 2*RS485+1*RS232
communication methodï¼? Wi-Fi/GPRS/Ethernet ( optional )
General Parameters General Parameters
Isolation typeï¼? Non - isolated
Night wear ( w )ï¼?
1. Use A-grade solar cell with high efficiency;
2. High transmittance, low iron tempered glass with enhanced stiffness and impact resistance;
3. Anodized aluminum alloy frame with high mechanical strength for easy installation;
4. Anti-aging EVA and high flame resistant Back Sheet (TPT), to provide long-life and enhanced cell performance;
5. Outstanding electrical performance under high temperature and low irradiance conditions;
6. 100% apply EL(electroluminescence) technology;
7. 5 years limited warranty, 10 years limited warranty for 90% power output, 25 years limited warranty for 80% power output;
8. With CE, ISO9001: 2008 certificate;
Commercial solar inverters are larger and more powerful versions of residential inverters, specifically designed to handle the higher electricity demands of commercial and industrial applications. They are a crucial component of a commercial solar power system, responsible for converting the direct current (DC) electricity generated by solar panels into usable alternating current (AC) electricity to power commercial buildings, factories, and other large-scale facilities.
Features
SUPERIOR EFFICIENCY
Maximum efficiency of 98.5%
Large string current, compatible with large PV modules
30KW with natural cooling design
HIGH RELIABILITY
IP66 protection level for outdoor installation
DC/AC Type Il SPD
Optional: AFCl, Night SVG, I/V detection, and integrated PID
INTELLIGENT MAINTENANCE
Power consumption monitoring
Remote configuration and upgrade
Quick commissioning via mobile app
String level current detection
61574 Fuel Energy Resources Suppliers
Short on time? Let Fuel Energy Resources sellers contact you.
Introduction:
The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.
Advantage:
ï?¬ Efficient
Advanced MPPT technology with up to 99.9% efficiency
Up to 22A PV input current perfect for high power
ï?¬ Reliable
Outputs high quality pure sine wave AC power
8-10kW load power to meet the needs of most
ï?¬ User-friendly
Industrial design with a modern aesthetic look
Easy to install and simple to use
ï?¬ Safety
360 degrees of security from hardware to software
EU and North American safety approvals
ï?¬ All-in-one
Solar Charger Controller up to 100A charging current
Support for Li-ion battery BMS communication
ï?¬ Intelligent
Exclusive Li-ion battery BMS dual activation
Time-slot function to save cost with peak-valley tariff
Essential details
Place of Origin: China
Model Number: SR-HES4855S100-H
Input Voltage: 500vdc
Output Voltage: 230Vac
Output Current: 100A
Output Frequency: 50Hz/ 60Hz
Output Type: Single
Size: 556MM*345MM*182MM
Type: DC/AC Inverters
Inverter Efficiency: 95%
Certificate: CE/RHOS/IEC
Warranty: 5 years
Weight: 20kg
Inverter type: On-grid and off-grid Solar Inverter
Rated power: 5500w
Protection: IP65
MPPT Efficiency: 98-99%
Display: LCD
Communication: WIFI / RS485
Battery type: Lead Acid \ Lithium \ Gel
Battery Voltage: 48 VDC
Peak power: 11000W
Color: White+Black
Introduction:
The HES series is equipped with a time-slot charging and discharging function, which allows users to set different charging and discharging periods according to the local peak and valley tariffs, so that the utility power and PV energy can be used rationally.
COMMUNICATION:
Embedded Interfaces: RS485 / CAN / USB / Dry contact
External Modulesï¼?Optionalï¼?Wi-Fi / GPRS
Time-slot charging/discharging function
When mains electricity is expensive, the battery inverter is used to carry the load; when the mains electricity is cheap, the mains electricity is used to carry the load and charge, which can help customers to save electricity costs to the greatest extent
Time-slot Mains Charging/Carrying Function
With 3 definable periods, the user can freely set the mains charging/carrying time within the range of 00:00 to 23:59. During the time period set by the user, if PV energy is available, PV energy will be used first, and if PV energy is not available or insufficient, utility energy will be used as a supplement.
Time-slot Battery Discharging Function
With 3 definable time periods, users can freely set the battery discharge time within the range of 00:00 to 23:59. During the time period set by the user, the inverter will give priority to the battery inverter to carry the load, and if the battery power is insufficient, the inverter will automatically switch to mains power to ensure stable operation of the load.
It has the function of segmented charging and discharging.
Backflow prevention and grid connection function.
Insulation resistance and leakage current detection function.
Working without battery under special conditions.
Lithium battery activation function, which can be triggered by mains or PV.
Power saving mode, reduce no-load loss.
.Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid charging.
Two output modes: mains bypass and inverter output, with UPS function.
360 all-round protection.
Allow lead-acid battery and lithium battery access.
ON/OFF switch controls the inverter AC output
Grid-connected mode can be set.
Design characteristics:
Adopting full-digital double closed loop control, combined with advanced SPWM.technology and pure sine wave output.
Advanced MPPT technology with efficiency of 99.9.
LCD screen and three LED indicator lights can clearly indicate the status and data.
Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
Multiple safety protection functions: short circuit protection, overload protection,reverse polarity protection and so on.
HF series is a new all-in-one hybrid solar charge inverter, which integrates solar energy storage & means charging energy storage and AC sine wave output. Thanks to DSP control and advanced control algorithm, it has high response speed, high reliability and high industrial standard. Four charging modes are optional, i.e. Only Solar, Mains Priority, Solar Priority and Mains & Solar hybrid charging; and two output modes are available, i.e. Inverter and Mains, to meet different application requirements.
Product name MPPT Hybrid Inverter for Solar Energy System
Model No. HF4850S80-H
Output Voltage 220/230/240 Vac
Output Frequency 50Hz/ 60Hz
Inverter Efficiency >95%
Warranty 14 months
Brand Name SRNE
Output voltage waveform Pure sine wave
Certificate CE(IEC/EN62109-1,-2),ROHS2.0
Rated power 5000w
Color White
AC charge current 60A
PV charge current 80A
Wifi function support
Maximum PV open circuit voltage 500V
Battery type Lead acid or lithium battery
Weight 13kg
Features:
1. Full digital voltage and current double closed-loop control, advanced SPWM technology, the output
of pure sine wave.
2. Two output modes: mains bypass and inverter output; uninterrupted power supply.
3. Available in 4 charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid
charging.
4. Advanced MPPT technology with an efficiency of 99.9%.
5. Designed with an LCD screen and 3 LED indicators for a dynamic display of system data and operating status.
6. ON/OFF rocker switch for AC output control.
7. Power saving mode available to reduce no-load loss.
8. Intelligent variable speed fan to efficiently dissipate heat and extend system life.
9. Lithium battery activation by PV solar or mains, allowing access of lead-acid battery and lithium battery.
10. 360 �° all-round protection with a number of protection functions.
11. Complete protections, including short circuit protection, over-voltage and under-voltage
protection, overload protection, reverse protection, etc.
Essential details
Warranty: 18 months
Free installation service: NO
Model Number: HFP4850S80-145
Application: Home, Business
Solar Panel Type: Monocrystalline Silicon, Polycrystalline Silicon
Battery Type: Lead-Acid, Lithium Ion
Controller Type: MPPT
Mounting Type: Ground Mounting
Load Power (W): 3KW, 6KW, 5kW, 10KW, Others
Output Voltage (V): 100V 110V 120V
Output Frequency: 50/60hz
Work Time (h): 24 hours
Certificate: CE RoHS,cETL,UL
Pre-sales project design: N
Battery: Lead Acid/LiFePO4 Lithium Battery
Type: Off-grid System
Keyword: mppt inverter
Output wave: Pure Shine Wave
Color: White
Inverter: Hybrid Inverter
AC output: 110/120/220Vac-240Vac
System Type: Off-grid Solar PV System
High waterproof grade, enough for outdoor use. Also good for indoor lighting when without the solar battery panel. The solar battery panel is detachable.
Muti powers and battery capacity for selection, customization is accepted.
The light color is customizable, for example, cool white or RGB.
Power Output: 550W
Max Power Voltage:44.08V
Cell Type: Monocrystalinline (182x182mm)
Number of cells: 144pcs
Dimensions: 2288 1138 35mm
Frame: Anodized Aluminium Alloy-silver
Sheet: white
Connector: MC4 or MC 4 comppatible
Cable: 0.9m
Packaging: 2pcs into one ctn box
item
monocryystal silicon 2 foldable solar panels kit 100W for portable power station camping outdoor
Model Number
ID-2F100W
Cell size
166mmx166mm
Type
PERC, Standard
Panel Dimensions
610 535 35(with pocket)mm 5mm
Panel Efficiency
100W
Certificate
CE
Warranty
1Year
Standard Operating Power (Pmax)
100W
Standard Operating Voltage(Vmp)
20V
Type of Battery Cell
Monocrystalline cell
Conversion rate
22-25%
Folding Way
2 folds
Folding Size
585 515 50(with pocket)mm 5mm
Open size
1313 535 5mm 5mm
Net Weight
3.9Kg 0.3Kg
Surface
ETFE bright surface
Power Input
DC5521 male connector with cable, with extra DC5525, DC6530, DC7909 connector (Can be customized per your needs)
Using high-sensitivity solar panels, with strong light sensitivity and a conversion efficiency of 24%;
Four generations of high-sensitivity integrated laminated solar panels are used, which are waterproof and scratch-resistant;
Apple and Android independent output design, intelligent restart, adapt to Apple's charging scheme;
The folding design of multiple solar panels is smaller than the commonly used A4 paper after folding. It is easy to carry outdoors and saves space.
Product Usage:
Going out for long-distance driving, boating, business trips, outings, outdoor travel, adventures, and camps.
Applicable to various portable digital products such as mobile phones, MP3/MP4, PDA, digital cameras, mobile digital devices--provide charging services.
This product does not contain batteries, and it directly relies on sunlight to charge electrical equipment, and it can also charge power bank as a backup power supply.
Available. Qty-11,506, USED- Sanyo HIP-195BA3 195W solar panels. Priced $37.00 Per panel. Panels are functional passing basic testing, in fair physical condition from age and use. Contact asap to arrange proforma PO or reserve as first right of purchase with down payment.
These are in the process of being decommissioned.
All our products meet the highest international standards with a comprehensive and first-class certification system. Also according to an internationally recognised third-party organisation, our manufacturer achieved a ranking amongst the Top 10 PV Module Suppliers and for many years and has been recognized as a Tier 1 Module has been chosen as a Top Performer Manufacturer.
Our products are certified by;
IEC61215:2016.IEC61730:2016
Latest Standard IS014001 and ISO45001
meeting the highest intemational standards Sreict quality control
Warranty : 12 Ys products / 25-30 Ys warranty on power output
61574 Fuel Energy Resources Suppliers
Short on time? Let Fuel Energy Resources sellers contact you.
